Bruno Santana

umt no modulo mtk 5.0  usando prelouder extraido da ultima firmware baixada pelo recue , selecione a aba one click marque red info e reset frp de start e plugue o cel desligado com o vol + e o vol - seguros 

preloader_p410ae.rar

xiaomi redmi note 10 - mojito
reset mi acc 
reset frp 

 

xiaomi redmi note 10 - mojito
reset mi acc 
reset frp 

 

reset senha 
reset conta google 
tectoy on 128gb 
segurar volume -

Operation : MTK One Click
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM82 [MediaTek USB Port (COM82)]
Device Path: \\?\usb#vid_0e8d&pid_0003#6&df2ee03&0&3#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0766, [MT6765] [Helio P35/G35]
Hardware Info: 0x8A00, 0xCA00, 0x00
Config : [SecureBoot: True] [SLA: True] [DA Auth: True]
MEID: 1ADFB1C16753D60C776D81A546AE8E42
Preparing device...
-- Success!
Preloader saved as : preloader_k62v1_64_bsp_220406_152930.bin
DA : MTK_AllInOne_DA.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port (COM82)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Information...
Build Date : Wed Aug 12 00:04:39 CST 2020
Build Flavor : full_k62v1_64_bsp-user
Build Desc. : full_k62v1_64_bsp-user 10 QP1A.190711.020 v4F4T-0 release-keys
Android Ver. : 10
Display ID : QP1A.190711.020 release-keys
Patch Level : 2020-08-05
Platform : MT6765
Board : MT6765
Platform : mt6765
Userdata is ENCRYPTED
Erasing Userdata...
- Success!
Seeking FRP Data...
Resetting FRP...
- Success!
Formatting NVRAM...
- Success!
Formatting NVDATA...
- Success!
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 5.0]
 

olha eu uso aqui a umt 
mas acredito que se vc roda o persist que tem dentro da firmware deve voltar 
 

Procedimento feito com o software
https://www.clansoft.net/dl/index.php?a=downloads&b=file&id=11699
 
Retirar a memória com cuidado, uso o adaptador UFS para BGA 254, removo o frp, e apos passa a flash com a Easy Jtag 2.
Após é só fazer o rebaling e colocar a memoria de volta, obs, sempre desativo as atualizações automática nas configurações de desenvolvedor.

ve se volta o boot com esta arquivo ai 
se nao der faço outro 
https://drive.google.com/file/d/1SkR37v6npMEj3xQGuvvDeqeS13NrmHDA/view?usp=sharing

reset frp samsung a01 
a015m 

Operation    : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM56)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.0.9.9
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID    : E1F00B00 [8937] 00002000
OPK_DATA    : E95B1A9E648A34AA19139A72611C64E3FB16DAF6E6CD9818926696791FC3D650
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_056]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware    : 8937, EMMC, 32 GB
LU Count    : 3 [0x03A3E000] [0x00002000] [0x00002000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Software    : QP1A.190711.020.A015MUBU4AUA5, A015MUBU4AUA5 [Wed Jan 20 00:08:10 KST 2021]
Android Ver.    : 10
Patch Level    : 2021-02-01
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 7.6

reset frp samsung a31 
a315f 

Operation : MTK One Click
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM14 [MediaTek USB Port (COM14)]
Device Path: \\?\usb#vid_0e8d&pid_0003#6&df2ee03&0&4#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0707, [MT6768] [Helio P65/G85 k68v1]
Hardware Info: 0x8A00, 0xCA00, 0x00
Config : [SecureBoot: True] [SLA: False] [DA Auth: True]
MEID: 0228D577601AC46AFB34757DDF526BF4
Preparing device...
-- Success!
Preloader saved as : preloader_k68v1_64_titan_220219_172246.bin
DA : MTK_AllInOne_DA.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port (COM14)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Information...
Build Date : Wed Apr 14 16:17:19 +07 2021
Build Flavor : a31nsdx-user
Build Desc. : a31nsdx-user 11 RP1A.200720.012 A315GDXU1CUD4 release-keys
Android Ver. : 11
Display ID : RP1A.200720.012.A315GDXU1CUD4
Patch Level : 2021-04-01
Userdata is ENCRYPTED
Seeking FRP Data...
- Resetting FRP...
- Success!
- Resetting FRP...
- Success!
Resetting FRP...
- Success!
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.9]

conector de carga Asus ZB551kl com trilha rompida. Solução.

Recuperado com sucesso. Desculpe pela demora em dar um feedback. Obrigado Bruno.

consegui pelo miflashtool
 

consegui pelo miflashtool
 

Esse ai passa de boa pela unlocktool. E caso você tenha a chimera. Desbloqueia o bootloader e passa via fastboot de tranquilo.

Boa tarde amigo, por favor seguindo a orientação acima leia e dê atenção as regras da casa ao postar suas duvidas:
 
Regras e Avisos do Fórum Clan GSM - Clan GSM
 
10 .d) Escrever o título de maneira clara e objetiva, demonstrando nitidamente o problema que tem dúvidas.
Não serão aceitos tópicos com expressões como ''URGENTE, ''AJUDA'' ou sem modelo ou dúvida resumida no título. 
Exemplo de título ideal : XT1033 não carrega após molhar

seja claro com sua pergunta amigo 
que vc precisa ???
 

Na UMT, aba Motorola lá no final vai ter MISC TOOL, selecione DISABLE FACTORY MODE com o aparelho em fastboot.

este aqui deu certo 
 

reset frp asus max m1 
zb555kl 
 

Boa tarde, eu já estou usando desde o lançamento oficial, no meu note de trabalho.
Minha maquina atendeu aos requisitos exigidos e não precisei fazer nenhuma "gambiarra" para instalar.
pode verificar compatibilidade instalando esse programa da própria Microsoft:
https://aka.ms/GetPCHealthCheckApp
 
Sobre a minha experiencia não tenho do que reclamar até o momento, funcionou muito bem, não tive problemas de driver nem para usar as box, tudo funcionando normalmente, achei ele até mais fluido que o W10, e ficou bem mais bonito esteticamente na minha opinião, no começo a gente estranha um pouco e se perde pra achar as coisas mas logo acostuma como acontece com qualquer novidade.
 
O que mais estou ansioso para usar são os aplicativos Android que vão rodar no Windows, mas ainda não estão disponíveis na versão oficial, esperar para ver.
 
Resumindo da minha parte não tenho reclamação nenhuma, recomendo a atualização.
 
Bom trabalho
 
Obs. Vou informar as configurações do meu note 
 

aqui acontece muito com a10s 
este aparelhos sao mtk 
baixe outras versao que da certo 

Positivo s532 Twist 2 Pro
flash 100%
processador 1.3 GHz Quad Core
chipset Cortex-A7 Unisoc SC7731E

EXE: Ultimate Unisoc Module v0.1
ACTION: Flash Firmware.
Selected firmware: 7731E_fs286m71_demo_0023165_256x8_V01_4X2_GPS_PLS_2SIM_20210519_1016.pac
NV: Default Mode (protect calibration)
Device Storage: EMMC
Start Detect phone.
Phone must be off with battery inside.
Long press "VOL -" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM86)
[00:00:00] Sending loader.
BOOT: SPRD3
Sending loader, keep boot key untill loader start.
[00:00:05] Loader ok
[00:00:05] Wait for loader....
Loader OK: ~"Spreadtrum Boot Block version 1.1
Changing bautrate OK.
[00:00:05] [1]First boot done.
[00:00:05] Sending second loader.
[00:00:10] Second loader sent ok.
New flash protocol detected.
[00:00:10] Reading: system
System name: system
Phone and firmware have same android
[00:00:10] Reading: miscdata
[00:00:10] Reading: w_fixnv1
NVRAM saved to: C:\Users\Bruno\Documents\spreadtrum_module\flashmode_nvram_backup\_353706100905053\_353706100905053_nvram_backup.tar
[00:00:22] Start write: w_fixnv1
Protecting GSM_CALI_ITEM_ID id: 0x2
Protecting W_Calibration id: 0x12D
Protecting AFC id: 0x9C7
Protecting BlueTooth id: 0x191
Protecting BandSelect id: 0xD
Protecting WIFI id: 0x199
Protecting MMITest id: 0x19A
Protecting WIFICal1 id: 0x19F
Protecting WIFICal2 id: 0x1A0
Protecting WIFICal3 id: 0x1A1
[00:00:26] Start write: prodnv
[00:00:27] Format: uboot
[00:00:27] [uboot]Format OK.
[00:00:27] Format: uboot_log
[00:00:27] [uboot_log]Format OK.
[00:00:27] Start write: splloader
[00:00:27] Start write: vbmeta
[00:00:28] Start write: w_modem
[00:00:33] Start write: w_deltanv
[00:00:33] Start write: w_gdsp
[00:00:36] Start write: pm_sys
[00:00:38] Start write: gpsgl
[00:00:38] Start write: gpsbd
[00:00:39] Start write: wcnmodem
[00:00:40] Start write: boot
[00:00:51] Start write: recovery
[00:01:02] Start write: system
[00:09:17] Start write: customerdata
[00:09:19] Start write: userdata
[00:09:32] Start write: logo
[00:09:33] Start write: fbootlogo
[00:09:33] Start write: cache
[00:09:35] Start write: vendor
[00:10:31] Format: w_runtimenv1
[00:10:31] [w_runtimenv1]Format OK.
[00:10:31] Format: misc
[00:10:31] [misc]Format OK.
[00:10:31] Start write: trustos
[00:10:31] Start write: sml
[00:10:32] Start write: uboot
[00:10:32] Start write: persist
[00:10:33] Start write: fbootlogo3
[00:10:33] Start write: fbootlogo4
[00:10:34] Start write: fbootlogo5
[00:10:34] Start write: UDC_config
Flashing done.
[can take 0-10 sec]Wait untill phone restart.
Log saved:
C:\Users\Bruno\Documents\spreadtrum_module\Saved_Logs\_writepac_.txt
Total Time: 00:10:34
Done.
 

reset frp a013m 
fazer test point 
 
Waiting for device in BROM mode...
Port: COM28
Port Name: MediaTek USB Port (COM28)
Path: \\?\usb#vid_0e8d&pid_0003#6&df2ee03&0&3#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0699, [MT6739]
Hardware Info: 0x8A00, 0xCB00, 0x02
SecureBoot: True
SLA: False
DA Auth: True
Disabling WatchDog...
- Success
Sending Payload data...
- Payload sent
Initiating Control Transfer...
- Done
Waiting for result...
Disable Auth Success
Preloader saved as : preloader_k39tv1_bsp_1g_titan_211014_114312.bin
DA : MTK_AllInOne_DA.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port (COM28)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Device Information...
Build Date : Wed Sep  1 07:42:32 KST 2021
Build Flavor : a01coreub-user
Build Desc. : a01coreub-user 10 QP1A.190711.020 A013MUBU3AUI1 release-keys
Android Ver. : 10
Display ID : QP1A.190711.020.A013MUBU3AUI1
Patch Level : 2021-09-01
Userdata is ENCRYPTED
Seeking FRP Data...
Resetting FRP...
- Success!
- Resetting FRP[2]...
- Success!
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.4]