William Ferreira Postado Abril 28, 2018 Compartilhar Postado Abril 28, 2018 Reset FRP g531h não suportado na octopus Device: Samsung Device Operation: Reset FRP (New Method) Port: COM7 : SAMSUNG Mobile USB Modem #2 Checking for Device... Found [Download Mode] Reading Data from Phone... Done Chipset: SPRD8735 [HiSpeed] Resetting FRP Lock Data... . Done Closing Session... Done ---------------- IMPORTANT ---------------- Wait for phone to reboot and turn on fully or TURN ON manually. Once Phone is completely ON, wait a few minutes and then. goto Menu > Settings > Backup and Reset and do Factory data Reset. Elapsed Time: 00:14 [Ultimate Samsung Flasher v1.3] Citar Link para o comentário Compartilhar em outros sites More sharing options...
William Ferreira Postado Abril 28, 2018 Compartilhar Postado Abril 28, 2018 Reset FRP asus ze554kl Z01KD usando modelo Z012DC 100% testado. Port : Fastboot Interface Baud Rate : Not Applicable Device : ASUS Z012DC Operation : FRP Reset Searching for Device in FastBoot Mode... OK Reading Information... OK FastBoot Ver. : GetVar Variable Not found Product : QC_Reference_Phone Bootloader : Locked Enabling ADB... OK Searching for Device... Found Model : ASUS_Z01KD Version : 7.1.1 Hardware : qcom Baseband : M3.7.41.5-Titan_004501 CPU : arm64-v8a SIM Card : READY,ABSENT Type : Unknown MEID(1) : Null/Empty Resetting FRP Lock... OK Now Goto Menu > Settings > Backup and Reset > Factory data reset. Operation Finished. Elapsed Time: 00:55 [Module Ver. 4.8] Bruno Santana reagiu a isso 1 Citar Link para o comentário Compartilhar em outros sites More sharing options...
Devanir Postado Abril 28, 2018 Compartilhar Postado Abril 28, 2018 Reset FRP Asus ZC554kl ASUS_X00ID ! Operation : Reset FRP Checking for existing devices...Found Port : Qualcomm HS-USB QDLoader 9008 (COM32) Driver Info : Lenovo Inc., leusbser.sys, 2.0.9.6 Opening Port...OK Init Handshake Sequence...OK Hardware ID : E1F00400 [8937] 00000000 OPK_DATA : 195B400B367642F4CF4C418D86A4E5DF32466A4DD10562790AEF7CEE900E2B8E Initializing Protocol...OK Using Auto Loader Selection [1] Preparing Firehose Loader...Done Sending Loader [8937_014.ufl]...Done Executing Loader...OK Detecting Chip Type...OK Hardware : 8937, eMMC, 32 GB LU Count : 1 [0x03A3E000] WARNING! High Speed Driver is not installed. Please install driver from QcFire\Drivers folder using Device Manager. Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512 Reading Partition Table...OK Reading Device Information...OK Device : asus ASUS_X00ID [msm8937] Software : NMF26F.WW_Phone-14.2016.1711.215-20171115, WW_Phone-14.2016.1711.215-20171115 [Wed Nov 15 22:14:52 CST 2017] Android Ver. : 7.1.1 Patch Level : 2017-11-01 Resetting FRP Lock......Done Operation Finished. Module Ver. 2.1 Citar Link para o comentário Compartilhar em outros sites More sharing options...
Devanir Postado Maio 7, 2018 Compartilhar Postado Maio 7, 2018 ZC553KL Asus Zenfone 3 Max 7.1.1 QC FRP RESET - X00DDA Port : Fastboot Interface Baud Rate : Not Applicable Device : Generic Operation : Qualcomm FRP Reset Searching for Device in FastBoot Mode... OK Reading Information... OK FastBoot Ver. : 0.5 Product : QC_REFERENCE_PHONE Warranty : Yes Bootloader : Locked Bootloader is Locked. FRP Reset may fail! Removing FRP Lock... Done Operation Finished. Elapsed Time: 00:02 [Module Ver. 4.9.1] Log Saved to Logs\180507_120021.log Citar Link para o comentário Compartilhar em outros sites More sharing options...
VAL CELULAR Postado Maio 14, 2018 Compartilhar Postado Maio 14, 2018 Remoção conta FRP ASUS ZD551KL Port : Fastboot Interface Baud Rate : Not Applicable Device : Generic Operation : Qualcomm FRP Reset Searching for Device in FastBoot Mode... OK Reading Information... OK FastBoot Ver. : 0.5 Product : MSM8916 Bootloader : Locked Bootloader is Locked. FRP Reset may fail! Removing FRP Lock... Done Operation Finished. Elapsed Time: 00:02 [Module Ver. 4.8] Log Saved to Logs\180514_085200.log Screenshot copied on clipboard. Anderson Vieira, PatrickRov, Bruno Santana e 1 outro reagiu a isso 4 Citar Link para o comentário Compartilhar em outros sites More sharing options...
VAL CELULAR Postado Maio 14, 2018 Compartilhar Postado Maio 14, 2018 FLASH NO LG D340f8 Port : COM69 : LGE AndroidNet USB Serial Port (COM69) Baud Rate : 115200 - Auto Device : LG D380 Operation : Write Firmware Opening Port...OK Reading Information...OK Model : LG-D340f8 PID : IMEI : 352941061140041 Firmware : D340f810b Factory Ver. : LGD340f8AT-00-V10b-SCA-XXX-APR-25-2014+0 LAF Ver. : 1.0 Chipset : msm8610 Operator : GLOBAL Country : COM Memory ID : K5XVMB Capacity : 3,64 GB Battery : 100% Analyzing KDZ Firmware... Loading DZ Firmware...Loaded 30 Partition(s) Model : LG-D340f8 Version : D340f810b Reading Partition Table...OK Setting Parameters...Done Formatting [userdata]...Done Formatting [encrypt]...Done Writing 01 of 30 [PrimaryGPT]...Done Writing 02 of 30 [modem]...Done Writing 03 of 30 [sbl1]...Done Writing 04 of 30 [rpm]...Done Writing 05 of 30 [tz]...Done Writing 06 of 30 [sdi]...Done Writing 07 of 30 [aboot]...Done Writing 08 of 30 [rpmb]...Done Writing 09 of 30 [tzb]...Done Writing 10 of 30 [abootb]...Done Writing 11 of 30 [persist]...Done Writing 12 of 30 [laf]...Done Writing 13 of 30 [boot]...Done Writing 14 of 30 [recovery]...Done Writing 15 of 30 [factory]...Done Writing 16 of 30 [sbl1b]...Done Writing 17 of 30 [cust]...Done Writing 18 of 30 [system]...Done Writing 19 of 30 [system]...Done Writing 20 of 30 [system]...Done Writing 21 of 30 [system]...Done Writing 22 of 30 [system]...Done Writing 23 of 30 [system]...Done Writing 24 of 30 [system]...Done Writing 25 of 30 [system]...Done Writing 26 of 30 [system]...Done Writing 27 of 30 [system]...Done Writing 28 of 30 [system]...Done Writing 29 of 30 [system]...Done Writing 30 of 30 [BackupGPT]...Done Reading Partition Table...OK Formatting [mpt]...Done Finalizing Parameters...Done Rebooting Device...Done Operation Finished. Time taken: 05:57 [Module Ver. 0.3] Log Saved to Logs\180511_114744.log AREATECNICACELULAR e Reginaldo almeida reagiu a isso 1 1 Citar Link para o comentário Compartilhar em outros sites More sharing options...
Bruno Santana Postado Maio 16, 2018 Autor Compartilhar Postado Maio 16, 2018 reset samsung g3502t Reginaldo almeida, AREATECNICACELULAR e Breno Rodrigues reagiu a isso 2 1 Citar Link para o comentário Compartilhar em outros sites More sharing options...
William Ferreira Postado Maio 26, 2018 Compartilhar Postado Maio 26, 2018 Reset FRP ZE554KL usando modelo Z012DC Port : Fastboot Interface Baud Rate : Not Applicable Device : ASUS Z012DC Operation : FRP Reset Searching for Device in FastBoot Mode... OK Reading Information... OK FastBoot Ver. : GetVar Variable Not found Product : QC_Reference_Phone Bootloader : Locked Enabling ADB... OK Searching for Device... Found Model : ASUS_Z01KD Version : 7.1.1 Hardware : qcom Baseband : M3.7.37.1-Titan_004501 CPU : arm64-v8a SIM Card : ABSENT,ABSENT Type : Unknown MEID(1) : Null/Empty Resetting FRP Lock... OK Now Goto Menu > Settings > Backup and Reset > Factory data reset. Operation Finished. Elapsed Time: 00:50 [Module Ver. 4.9.1] Log Saved to Logs\180526_153856.log Bruno Santana, Reginaldo almeida e Wellington Maciel™ reagiu a isso 3 Citar Link para o comentário Compartilhar em outros sites More sharing options...
William Ferreira Postado Junho 5, 2018 Compartilhar Postado Junho 5, 2018 (editado) FRP Moto X4 XT1900-6 Port : Fastboot Inteface Baud Rate : Not Applicable Device : Motorola Operation : New FRP Reset Searching for Device in FastBoot Mode... OK Reading Phone Information... Model : XT1900-6 Boot Ver. : MBM-3.0-uefi-641a15b-180131 Baseband : M660_7036.16.01.69R PAYTON_LATAMDSDS_CUST Software : Blur_Version.27.241.9.payton.retail.en.US IMEI : 12346789 CPU : SDM630 1.0 (6) RAM : 3GB SAMSUNG LP4x DIE=12Gb M5=01 M6=06 M7=00 M8=0E EMMC : 32GB SAMSUNG DD68MB RV=08 PV=02 FV=0000000000000002 Setting Factory Mode... OK Searching Network Interface... Found Connecting to device... OK Model : moto x4 Bootloader : MBM-3.0-uefi-641a15b-180131 Baseband : M660_7036.16.01.69R PAYTON_LATAMDSDS_CUST Build : Blur_Version.27.241.9.payton.retail.en.US Android : 8.0.0 Searching Network Interface... Found Connecting to device... OK Model : moto x4 Bootloader : MBM-3.0-uefi-641a15b-180131 Baseband : M660_7036.16.01.69R PAYTON_LATAMDSDS_CUST Build : Blur_Version.27.241.9.payton.retail.en.US Android : 8.0.0 Operation Finished. Elapsed Time: 02:28 [Module Ver. 5.0] Editado Junho 5, 2018 por William Ferreira Reginaldo almeida reagiu a isso 1 Citar Link para o comentário Compartilhar em outros sites More sharing options...
D'zn Info-Cell Postado Junho 9, 2018 Compartilhar Postado Junho 9, 2018 Reparo de boot do aparelho LG D385 Aparelho não ligava, nem mostrava carregando> Operation : Flash Checking for existing devices...Found Port : Qualcomm HS-USB QDLoader 9008 (COM97) Driver Info : HS Corporation, ghsser.sys, 10.2104.1.2 Opening Port...OK Init Handshake Sequence...OK Hardware ID : E1108100 [8x26] 00000000 OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E Initializing Protocol...OK Using Auto Loader Selection [1] Preparing Firehose Loader...Done Sending Loader [8x26.ufl]...Done Executing Loader...OK Detecting Chip Type...OK Hardware : 8x10, eMMC, ERASED GPT Payload Info : In: 262144 [4096], Out: 49152, Sector Size: 512 Writing [PrimaryGPT_0.bin] -> [PrimaryGPT] ...Done Writing [modem_8192.bin] -> [modem] ...Done Writing [sbl1_139264.bin] -> [sbl1] ...Done Writing [rpm_141312.bin] -> [rpm] ...Done Writing [tz_142336.bin] -> [tz] ...Done Writing [sdi_143360.bin] -> [sdi] ...Done Writing [aboot_144384.bin] -> [aboot] ...Done Writing [rpmb_148480.bin] -> [rpmb] ...Done Writing [tzb_149504.bin] -> [tzb] ...Done Writing [abootb_150528.bin] -> [abootb] ...Done Writing [persist_204800.bin] -> [persist] ...Done Writing [laf_270336.bin] -> [laf] ...Done Writing [boot_319488.bin] -> [boot] ...Done Writing [recovery_364544.bin] -> [recovery] ...Done Writing [factory_475136.bin] -> [factory] ...Done Writing [sbl1b_581632.bin] -> [sbl1b] ...Done Writing [cust_655360.bin] -> [cust] ...Done Writing [BackupGPT_15268864.bin] -> [BackupGPT] ...Done Resetting device...Done Operation Finished. Module Ver. 2.3 Reginaldo almeida reagiu a isso 1 Citar Link para o comentário Compartilhar em outros sites More sharing options...
Bruno Santana Postado Junho 15, 2018 Autor Compartilhar Postado Junho 15, 2018 reset frp multilasr ms55 Operation : Reset FRP CPU : MT6580 Storage : EMMC DA : MTK_AllInOne_DA.bin [MTK_AllInOne_DA_v3.3001.2017-12-29.16:29] Waiting for Phone in BROM Mode... Connect Power Off phone within 30 secs... Port : MediaTek PreLoader USB VCOM (Android) (COM40) Connected to BROM. Sending Download Agent... connect DA end stage: 2, enable DRAM in 1st DA: 0 Connected to Download Agent.. Driver: MediaTek Inc., usb2ser.sys, 3.0.1504.0 Syncing with Target... Reading Partition Table... Reading Device Information... Brand : Multilaser Manufacturer : Multilaser Model : MS55 Prod. Name : MS55 Device : MS55 Board : Android Platform : mt6580 Android Ver. : 5.1 Display ID : MS55.V13_20170225 Patch Level : 2017-02-05 Userdata is NOT ENCRYPTED Resetting FRP... FRP Reset Done. Disconnect Battery/Cable and Power On Phone. [Ver. 1.4] William Ferreira, Breno Rodrigues e Reginaldo almeida reagiu a isso 3 Citar Link para o comentário Compartilhar em outros sites More sharing options...
ToninhoSantos Postado Julho 5, 2018 Compartilhar Postado Julho 5, 2018 (editado) Lenovo VIBE B FRP RESET Procedimento: clique em RESET FRP e connecte o cabo usb com a bateria inserida. Operation : Reset FRP CPU : MT6735M Storage : EMMC DA : DA_SWSEC_LEN2.bin [MTK_AllInOne_DA_v3.3001.00.00] Waiting for Phone in BROM Mode... Connect Power Off phone within 30 secs... Port : MediaTek PreLoader USB VCOM (Android) (COM6) Connected to BROM. Sending Download Agent... connect DA end stage: 2, enable DRAM in 1st DA: 0 Connected to Download Agent.. Driver: MediaTek Inc., usb2ser.sys, 3.0.1504.0 Syncing with Target... Reading Partition Table... Reading Device Information... Brand : Lenovo Manufacturer : LENOVO Model : Lenovo A2016b30 Prod. Name : A2016b30 Device : A2016b30 Board : A2016b30 Platform : mt6735m Android Ver. : 6.0 Display ID : A2016b30_S163_160906_8G_LATAM Patch Level : 2016-07-05 Userdata is NOT ENCRYPTED Resetting FRP... FRP Reset Done. Disconnect Battery/Cable and Power On Phone. [Ver. 1.5] Editado Julho 6, 2018 por ToninhoSantos Clicerio Domingos, Suporte Cell Oficial e Jaylsonn reagiu a isso 3 Citar Link para o comentário Compartilhar em outros sites More sharing options...
bryanfellipe Postado Julho 18, 2018 Compartilhar Postado Julho 18, 2018 K130F (K4) Citar Link para o comentário Compartilhar em outros sites More sharing options...
Dr.Software Postado Julho 19, 2018 Compartilhar Postado Julho 19, 2018 Usando os seguinte arquivo loader do modelo CAT S40 https://www.clansoft.net/dl/index.php?a=downloads&b=file&id=3553 e com ajuda de nosso amigo Bruno Santana Operation : Reset FRP Checking for existing devices...Not Found Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable. Some phones may need Special Boot Cable or TestPoint for EDL mode. Found Port : Qualcomm HS-USB QDLoader 9008 (COM126) Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.0.8.7 Connecting to phone...OK Waiting for response...OK Init Handshake Sequence...OK Hardware ID : E1009600 [8909] 00000000 OPK_DATA : 8F1359FD1554B6295A938DC2BCAA90ADE0D790FD1A7758B0A007AFE1F5FF0DC5 Initializing Protocol...OK Sending Loader [Qualcomm_Factory_Loader_MSM8909_Cat_S40.mbn]...Done Executing Loader...OK Detecting Chip Type...OK Hardware : 8909, eMMC, 16 GB LU Count : 1 [0x01D5C000] WARNING! High Speed Driver is not installed. Please install driver from QcFire\Drivers folder using Device Manager. Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512 Reading Partition Table...OK Reading Device Information...OK Device : BullittGroupLimited S40 [msm8909] Software : LTE_D0201121.0_S40_0.030.01, 2085 [Thu Oct 26 19:06:23 CST 2017] Android Ver. : 5.1 Patch Level : 2017-10-01 Resetting FRP Lock......Done Operation Finished. Bruno Santana reagiu a isso 1 Citar Link para o comentário Compartilhar em outros sites More sharing options...
William Ferreira Postado Julho 19, 2018 Compartilhar Postado Julho 19, 2018 Reset FRP Mi Max 2 Operation : Reset FRP Checking for existing devices...Not Found Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable. Some phones may need Special Boot Cable or TestPoint for EDL mode. Found Port : Qualcomm HS-USB QDLoader 9008 (COM77) Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2 Connecting to phone...OK Waiting for response...Ignored Init Handshake Sequence...OK Hardware ID : E1600400 [8953] 00000000 OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B Initializing Protocol...OK Using Auto Loader Selection [1] Preparing Firehose Loader...Done Sending Loader [8953.ufl]...Done Executing Loader...OK Detecting Chip Type...OK Hardware : 8953, eMMC, 64 GB LU Count : 1 [0x0747C000] WARNING! High Speed Driver is not installed. Please install driver from QcFire\Drivers folder using Device Manager. Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512 Reading Partition Table...OK Reading Device Information...OK Device : Xiaomi MI MAX 2 [msm8953] Software : NMF26F, V9.5.5.0.NDDMIFA [Thu May 24 22:58:04 CST 2018] Android Ver. : 7.1.1 Patch Level : 2018-05-01 Resetting FRP Lock.......Done Operation Finished. Module Ver. 2.3 Citar Link para o comentário Compartilhar em outros sites More sharing options...
William Ferreira Postado Julho 31, 2018 Compartilhar Postado Julho 31, 2018 Reset FRP HOMTOM S9 Plus Operation : Reset FRP CPU : MT6750T Storage : EMMC DA : DA_PL.bin [MTK_AllInOne_DA_v3.3001.00.00] Waiting for Phone in BROM Mode... Connect Power Off phone within 30 secs... Port : MediaTek PreLoader USB VCOM (Android) (COM49) Connected to BROM. Sending Download Agent... connect DA end stage: 2, enable DRAM in 1st DA: 0 Connected to Download Agent.. Driver: MediaTek Inc., usb2ser.sys, 3.0.1504.0 Syncing with Target... Reading Partition Table... Reading Device Information... Brand : HOMTOM Manufacturer : HOMTOM Model : S9 Plus Prod. Name : S9 Plus Device : S9 Plus Board : S9 Plus Platform : mt6750 Android Ver. : 7.0 Display ID : HOMTOM_S9_Plus_V01_20171028 Patch Level : 2017-07-05 Userdata is ENCRYPTED Resetting FRP... FRP Reset Done. Disconnect Battery/Cable and Power On Phone. [Ver. 1.5] Bruno Santana e Reginaldo almeida reagiu a isso 2 Citar Link para o comentário Compartilhar em outros sites More sharing options...
bryanfellipe Postado Agosto 3, 2018 Compartilhar Postado Agosto 3, 2018 UMT MTK MODULE MODELO: MS50 Brand : Multilaser Model : MS50M Operation : Reset FRP Qt: Untested Windows version 6.2 detected! Waiting for Phone in BROM Mode... Connect Power Off phone within 30 secs... Port : MediaTek PreLoader USB VCOM (Android) (COM4) Connected to BROM. Sending Download Agent... connect DA end stage: 2, enable DRAM in 1st DA: 0 Connected to Download Agent.. Driver: MediaTek Inc., usb2ser.sys, 3.0.1504.0 Syncing with Target... Reading Partition Table... Reading Device Information... Brand : Multilaser Manufacturer : Multilaser Model : MS50M Prod. Name : MS50M Device : MS50M Board : MS50M Platform : mt6580 Android Ver. : 5.1 Display ID : MS50M.V4_20160622 Patch Level : 2016-04-01 Userdata is NOT ENCRYPTED Resetting FRP... FRP Reset Done. Disconnect Battery/Cable and Power On Phone. [Ver. 1.5] Citar Link para o comentário Compartilhar em outros sites More sharing options...
William Ferreira Postado Agosto 4, 2018 Compartilhar Postado Agosto 4, 2018 Em 02/08/2018 em 15:56, Clicerio Domingos disse: Boa tarde. Meu amigo tem como o senhor me dizer como gerou essa port de comunicação? (ou seja, em qual modo ele ficou - Factory mode, fastboot, bp tool). Só conectar em modo factory amigo e fazer o mesmo procedimento do print. Clicerio Domingos reagiu a isso 1 Citar Link para o comentário Compartilhar em outros sites More sharing options...
William Ferreira Postado Agosto 11, 2018 Compartilhar Postado Agosto 11, 2018 Reset FRP Xiaomi Mi A1 Android 8.0 Operation : Reset FRP Checking for existing devices...Not Found Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable. Some phones may need Special Boot Cable or TestPoint for EDL mode. Found Port : Qualcomm HS-USB QDLoader 9008 (COM77) Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2 Connecting to phone...OK Waiting for response...Ignored Init Handshake Sequence...OK Hardware ID : E1600400 [8953] 00000000 OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B Initializing Protocol...OK Using Auto Loader Selection [1] Preparing Firehose Loader...Done Sending Loader [8953.ufl]...Done Executing Loader...OK Detecting Chip Type...OK Hardware : 8953, eMMC, 64 GB LU Count : 1 [0x0747C000] WARNING! High Speed Driver is not installed. Please install driver from QcFire\Drivers folder using Device Manager. Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512 Reading Partition Table...OK Reading Device Information...OK Device : Xiaomi Mi A1 [msm8953] Software : OPR1.170623.026.V9.5.11.0.ODHMIFA, V9.5.11.0.ODHMIFA [Fri May 4 18:00:46 WIB 2018] Android Ver. : 8.0.0 Patch Level : 2018-05-05 Resetting FRP Lock......Done Operation Finished. Module Ver. 2.6 Reginaldo almeida reagiu a isso 1 Citar Link para o comentário Compartilhar em outros sites More sharing options...
Bruno Santana Postado Agosto 14, 2018 Autor Compartilhar Postado Agosto 14, 2018 reset frp zte z799vl Reginaldo almeida, 123adilson e Dr.Software reagiu a isso 3 Citar Link para o comentário Compartilhar em outros sites More sharing options...
William Ferreira Postado Agosto 18, 2018 Compartilhar Postado Agosto 18, 2018 Reset FRP MS55M Operation : Reset FRP CPU : MT6580 Storage : EMMC DA : DA_SWSEC_6580_98737_71604.bin [MTK_AllInOne_DA_v3.3001.00.00] Waiting for Phone in BROM Mode... Connect Power Off phone within 30 secs... Port : MediaTek PreLoader USB VCOM (Android) (COM123) Connected to BROM. Sending Download Agent... connect DA end stage: 2, enable DRAM in 1st DA: 0 Connected to Download Agent.. Driver: MediaTek Inc., usb2ser.sys, 3.0.1504.0 Syncing with Target... Reading Partition Table... Reading Device Information... Brand : Multilaser Manufacturer : Multilaser Model : MS55M Prod. Name : MS55M Device : MS55M Board : MS55M Platform : mt6580 Android Ver. : 7.0 Display ID : MS55M.V11_20171019 Patch Level : 2017-06-05 Userdata is NOT ENCRYPTED Resetting FRP... FRP Reset Done. Disconnect Battery/Cable and Power On Phone. [Ver. 1.5] Clicerio Domingos, Wellington Maciel™ e Reginaldo almeida reagiu a isso 3 Citar Link para o comentário Compartilhar em outros sites More sharing options...
William Ferreira Postado Agosto 22, 2018 Compartilhar Postado Agosto 22, 2018 Reset FRP Moto C XT1558 Brand : Motorola Model : XT1757 Operation : Reset FRP Waiting for Phone in BROM Mode... Connect Power Off phone within 30 secs... Port : MediaTek PreLoader USB VCOM (Android) (COM123) Connected to BROM. Sending Download Agent... connect DA end stage: 2, enable DRAM in 1st DA: 0 Connected to Download Agent.. Driver: MediaTek Inc., usb2ser.sys, 3.0.1504.0 Syncing with Target... Reading Partition Table... Reading Device Information... Brand : motorola Manufacturer : motorola Model : Moto C Prod. Name : namath_58 Device : namath Platform : mt6737m Android Ver. : 7.0 Display ID : NRD90M.010 Patch Level : 2017-07-05 Userdata is NOT ENCRYPTED Resetting FRP... FRP Reset Done. Disconnect Battery/Cable and Power On Phone. [Ver. 1.5] Reginaldo almeida reagiu a isso 1 Citar Link para o comentário Compartilhar em outros sites More sharing options...
Bruno Santana Postado Agosto 24, 2018 Autor Compartilhar Postado Agosto 24, 2018 frp j105b Emilio cell PE, Claudio Neto e William Ferreira reagiu a isso 3 Citar Link para o comentário Compartilhar em outros sites More sharing options...
William Ferreira Postado Setembro 1, 2018 Compartilhar Postado Setembro 1, 2018 Reparo boot XT1640 100% done Model : XT1643 Operation : Boot Repair Checking for existing devices...Found Port : Qualcomm HS-USB QSC Diagnostics 9065 (COM77) Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2 Opening Port...OK Init Handshake Sequence...OK Hardware ID : E1209700 [8952] 00002803 OPK_DATA : 617E50AB1CB133CC88721091CD79DBC95BF9A3B84FA9489DA856F25CAD8A384B Initializing Protocol...OK Sending Loader...Done Executing Loader...OK CPU Version : 1.1 Secure : Yes Chipset : 8952 Chip Type : eMMC Protocol : 1 Payload : 4096/1048576 Sectors : 61071360 Sector Size : 512 Reading Partition Table...OK Writing Data [aboot]...Done Writing Data [rpm]...Done Writing Data [tz]...Done Writing Data [hyp]...Done Writing Data [cmnlib]...Done Writing Data [keymaster]...Done Writing Data [sbl1]...Done Rebooting device to Fastboot...Done Please use UMT GSM Module to flash latest firmware now. Operation Finished. Module Ver. 2.6 Bruno Santana reagiu a isso 1 Citar Link para o comentário Compartilhar em outros sites More sharing options...
Emilio cell PE Postado Setembro 6, 2018 Compartilhar Postado Setembro 6, 2018 FRP XT1603 MOTOG 4PLAY 100% Reginaldo almeida reagiu a isso 1 Citar Link para o comentário Compartilhar em outros sites More sharing options...
Posts Recomendados
Participe da conversa
Você pode postar agora e se cadastrar mais tarde. Se você tem uma conta, faça o login para postar com sua conta.
Nota: Sua postagem exigirá aprovação do moderador antes de ficar visível.