Ir para conteúdo

Posts Recomendados

frp moto g 4 plus done 

usb estava estragado por isso so neste metodo 

 

Welcome to Medusa Pro Software version 1.4.1.

Started.

Reader #0: Alcor Micro USB Smart Card Reader 0

Reader #1: Alcor Micro USB Smart Card Reader 1

Reader #2: Gemalto e-gate Smart Card 0

 

Please disconnect battery and USB cable.

 

Model Settings:

Interface : eMMC

Brand : Motorola

Model : XT1642

SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/MOTOROLA_XT1642_EMMC.srf

Voltage : 1.8V

Bus Mode : 1

Bus speed : Auto

 

Connecting...

Device : Hynix eMMC HBG4a2

Page size : 512 B

Block size : 512 B

Block count : 61071360

Size : 29.12 GB

---------------------------------------------------------------

CID Info

 

CID : 90014A484247346132A51D1A9C201423

Manufacturer ID : 0X90

Device/BGA : BGA (Discrete embedded)

OEM/Application ID : 0X4A

Product name : HBG4a2

Product revision : 10.5

Product serial number : (hex) 1D1A9C20

Manufacturing date : 01/2017

---------------------------------------------------------------

CSD Info

 

CSD : D02701328F5903FFFFFFFFE78A400017

CSD structure : CSD version No. 1.2

SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,

4.51, 5.0, 5.01, 5.1

Data read access time1: 15 ms

TRAN speed : 26 MHz

READ block length : 512 Bytes

WP group enable : YES

PERM_WRITE_PROTECT : NO

TMP_WRITE_PROTECT : NO

---------------------------------------------------------------

EXTCSD Info

 

Revision 1.8 (for MMC v5.1)

Erase block size : 512 Kbytes

Boot1 size : 4096 Kbytes

Boot2 size : 4096 Kbytes

RPMB size : 4096 Kbytes

 

Partition config : 00111000

Boot partition enable : User area (Bus width = 1Bit)

Boot ACK : No boot acknowledge sent (default)

 

Boot bus conditions : 00000000

Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)

Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)

Boot mode : Use single data rate + backward compatible timings in boot operation (default)

 

Partitioning support : Device supports partitioning features

Enhanced attribute : Device can have enhanced technological features in partitions and user data area.

Max enhanced data size: 15265792 Kbytes

Partitions attribute : 0x0

Part setting completed: 0x0

GP partition 1 size : 0 b

GP partition 2 size : 0 b

GP partition 3 size : 0 b

GP partition 4 size : 0 b

Enhanced area size : (0x0) 0 b

Enhanced area start : (0x0) 0 b

 

Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/HBG4a2_23_07_2018_16_46_38.bin.

Connect successful.

---------------------------------------------------------------

SW: 1.4.1; FW: 1.20.

P00: GPT (00000000, 00000100)

P01: modem (00000100, 00032000)

P02: fsc (00032100, 00000002)

P03: ssd (00032102, 00000010)

P04: sbl1 (00032112, 00000400)

P05: sbl1bak (00032512, 00000400)

P06: rpm (00032912, 000001B0)

P07: rpmbak (00032D12, 000001B0)

P08: tz (00033112, 00000718)

P09: tzbak (00033D12, 00000718)

P10: hyp (00034912, 000000C0)

P11: hypbak (00034D12, 000000C0)

P12: dsp (00035112, 00008000)

P13: modemst1 (0003D112, 00001000)

P14: modemst2 (0003E112, 00001000)

P15: DDR (0003F200, 00000040)

P16: fsg (0003F240, 00004000)

P17: sec (00043240, 00000020)

P18: aboot (00043300, 00000BB8)

P19: abootbak (00043F00, 00000BB8)

P20: logs (00044B00, 00001000)

P21: utags (00045B00, 00000400)

P22: utagsBackup (00045F00, 00000400)

P23: cid (00046300, 00000100)

P24: logo (00046400, 00008000)

P25: clogo (0004E400, 00008000)

P26: metadata (00056400, 00000400)

P27: kpan (00056800, 00004000)

P28: boot (0005A800, 00008000)

P29: recovery (00062800, 000080C8)

P30: persist (0006A900, 00010000)

P31: misc (0007A900, 00000800)

P32: config (0007B100, 00000040)

P33: limits (0007B200, 00000040)

P34: mota (0007B300, 00000800)

P35: devcfg (0007BB00, 00000200)

P36: dip (0007BD00, 00000800)

P37: syscfg (0007C500, 00000400)

P38: cmnlib (0007C900, 00000188)

P39: keymaster (0007CB00, 000001B8)

P40: frp (0007CD00, 00000400)

P41: padC (0007D100, 0000AF00)

P42: sp (00088000, 00004000)

P43: hw (0008C000, 00004000)

P44: customize (00090000, 00010000)

P45: oem (000A0000, 00148000)

P46: cache (001E8000, 00080000)

P47: system (00268000, 00500000)

P48: userdata (00768000, 032C5F00)

Removing FRP. Please wait... Done.

SW: 1.4.1; FW: 1.20.

Erasing. Please wait... Erasing partition frp... Done.

Done

Disconnected.

SW: 1.4.1; FW: 1.20.

Compartilhar este post


Link para o post
Compartilhar em outros sites

G530BT EMMC Pinout Sucesso ! 
 

Connect successful.
---------------------------------------------------------------
SW: 1.4.1; FW: 1.20.
P00: GPT              (00000000, 00002000)
P01: apnhlos          (00002000, 00007800)
P02: modem            (00009800, 0001CB80)
P03: sbl1             (00026380, 00000400)
P04: ddr              (00026780, 00000040)
P05: aboot            (000267C0, 00001000)
P06: rpm              (000277C0, 00000400)
P07: qsee             (00027BC0, 00000400)
P08: qhee             (00027FC0, 00000400)
P09: fsg              (000283C0, 00001800)
P10: sec              (00029BC0, 00000020)
P11: pad              (00029BE0, 00005420)
P12: param            (0002F000, 00005000)
P13: efs              (00034000, 00007000)
P14: modemst1         (0003B000, 00001800)
P15: modemst2         (0003C800, 00001800)
P16: boot             (0003E000, 00006800)
P17: recovery         (00044800, 00007800)
P18: fota             (0004C000, 00002802)
P19: backup           (0004E802, 000037EE)
P20: fsc              (00051FF0, 00001800)
P21: ssd              (000537F0, 00000010)
P22: persist          (00053800, 00004000)
P23: persdata         (00057800, 00004800)
P24: system           (0005C000, 002EC000)
P25: cache            (00348000, 00096000)
P26: hidden           (003DE000, 00005000)
P27: userdata         (003E3000, 00AACFD8)
Repairing from file "C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-G530BT.srf".
Write data verification is enabled.
Writing GPT partition...    Done.
Writing apnhlos partition...    Done.
Writing modem partition...    Done.
Writing sbl1 partition...    Done.
Writing ddr partition...    Done.
Writing aboot partition...    Done.
Writing rpm partition...    Done.
Writing qsee partition...    Done.
Writing qhee partition...    Done.
Writing fsg partition...    Done.
Writing sec partition...    Done.
Writing pad partition...    Done.
Writing param partition...    Done.
Writing efs partition...    Done.
Writing modemst1 partition...    Done.
Writing modemst2 partition...    Done.
Writing boot partition...    Done.
Writing recovery partition...    Done.
Writing fota partition...    Done.
Writing backup partition...    Done.
Writing fsc partition...    Done.
Writing ssd partition...    Done.
Writing persist partition...    Done.
Writing persdata partition...    Done.

Smart Repair is successfully complete.
Disconnected.

WhatsApp Image 2018-08-21 at 7.26.jpg

Compartilhar este post


Link para o post
Compartilhar em outros sites
Em 09/06/2018 em 01:41, ElvisLuizS disse:

 

Cara preciso muito da tua ajuda, tenho alguns aparelhos com este defeito, já chequei o setor de RF mas está tudo ok, e aparece rádio desativado

Compartilhar este post


Link para o post
Compartilhar em outros sites
Em 18/07/2018 em 01:33, ElvisLuizS disse:

Medusa pro - XT1710-07 EMMC

 

 

Compartilhar este post


Link para o post
Compartilhar em outros sites
Em 21/08/2018 em 19:54, ElvisLuizS disse:

G530BT EMMC Pinout Sucesso ! 
 

Connect successful.
---------------------------------------------------------------
SW: 1.4.1; FW: 1.20.
P00: GPT              (00000000, 00002000)
P01: apnhlos          (00002000, 00007800)
P02: modem            (00009800, 0001CB80)
P03: sbl1             (00026380, 00000400)
P04: ddr              (00026780, 00000040)
P05: aboot            (000267C0, 00001000)
P06: rpm              (000277C0, 00000400)
P07: qsee             (00027BC0, 00000400)
P08: qhee             (00027FC0, 00000400)
P09: fsg              (000283C0, 00001800)
P10: sec              (00029BC0, 00000020)
P11: pad              (00029BE0, 00005420)
P12: param            (0002F000, 00005000)
P13: efs              (00034000, 00007000)
P14: modemst1         (0003B000, 00001800)
P15: modemst2         (0003C800, 00001800)
P16: boot             (0003E000, 00006800)
P17: recovery         (00044800, 00007800)
P18: fota             (0004C000, 00002802)
P19: backup           (0004E802, 000037EE)
P20: fsc              (00051FF0, 00001800)
P21: ssd              (000537F0, 00000010)
P22: persist          (00053800, 00004000)
P23: persdata         (00057800, 00004800)
P24: system           (0005C000, 002EC000)
P25: cache            (00348000, 00096000)
P26: hidden           (003DE000, 00005000)
P27: userdata         (003E3000, 00AACFD8)
Repairing from file "C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-G530BT.srf".
Write data verification is enabled.
Writing GPT partition...    Done.
Writing apnhlos partition...    Done.
Writing modem partition...    Done.
Writing sbl1 partition...    Done.
Writing ddr partition...    Done.
Writing aboot partition...    Done.
Writing rpm partition...    Done.
Writing qsee partition...    Done.
Writing qhee partition...    Done.
Writing fsg partition...    Done.
Writing sec partition...    Done.
Writing pad partition...    Done.
Writing param partition...    Done.
Writing efs partition...    Done.
Writing modemst1 partition...    Done.
Writing modemst2 partition...    Done.
Writing boot partition...    Done.
Writing recovery partition...    Done.
Writing fota partition...    Done.
Writing backup partition...    Done.
Writing fsc partition...    Done.
Writing ssd partition...    Done.
Writing persist partition...    Done.
Writing persdata partition...    Done.

Smart Repair is successfully complete.
Disconnected.

WhatsApp Image 2018-08-21 at 7.26.jpg

Precisa de resistor ? De quantos ohms ?

Compartilhar este post


Link para o post
Compartilhar em outros sites

Participe da conversa

Você pode postar agora e se cadastrar mais tarde. Se você tem uma conta, faça o login para postar com sua conta.
Note: Your post will require moderator approval before it will be visible.

Visitante
Responder

×   Você colou conteúdo com formatação.   Remover formatação

  Apenas 75 emojis são permitidos.

×   Seu link foi automaticamente incorporado.   Mostrar como link

×   Seu conteúdo anterior foi restaurado.   Limpar o editor

×   Não é possível colar imagens diretamente. Carregar ou inserir imagens do URL.


  • Quem Está Navegando   0 membros estão online

    Nenhum usuário registrado visualizando esta página.

×
×
  • Criar Novo...