Reset FRP g531h não suportado na octopus 

 

Device: Samsung Device
Operation: Reset FRP (New Method)
Port: COM7 : SAMSUNG Mobile USB Modem #2
Checking for Device... Found [Download Mode]
Reading Data from Phone... Done
Chipset: SPRD8735 [HiSpeed]
Resetting FRP Lock Data... . Done
Closing Session... Done
---------------- IMPORTANT ----------------
Wait for phone to reboot and turn on fully or TURN ON manually.
Once Phone is completely ON, wait a few minutes and then.
goto Menu > Settings > Backup and Reset and do Factory data Reset.
Elapsed Time: 00:14
[Ultimate Samsung Flasher v1.3]

Reset FRP asus ze554kl Z01KD usando modelo  Z012DC 100% testado. 

 

Port    : Fastboot Interface
Baud Rate    : Not Applicable
Device    : ASUS Z012DC
Operation    : FRP Reset
Searching for Device in FastBoot Mode... OK
Reading Information... OK
FastBoot Ver.    : GetVar Variable Not found
Product    : QC_Reference_Phone
Bootloader    : Locked
Enabling ADB... OK
Searching for Device... Found
Model    : ASUS_Z01KD
Version    : 7.1.1
Hardware    : qcom
Baseband    : M3.7.41.5-Titan_004501
CPU    : arm64-v8a
SIM Card    : READY,ABSENT
Type    : Unknown
MEID(1)    : Null/Empty
Resetting FRP Lock... OK
Now Goto Menu > Settings > Backup and Reset > Factory data reset.
Operation Finished.
Elapsed Time: 00:55
[Module Ver. 4.8]

Reset FRP Asus ZC554kl ASUS_X00ID !

 Operation    : Reset FRP
Checking for existing devices...Found
Port    : Qualcomm HS-USB QDLoader 9008 (COM32)
Driver Info    : Lenovo Inc., leusbser.sys, 2.0.9.6
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID    : E1F00400 [8937] 00000000
OPK_DATA    : 195B400B367642F4CF4C418D86A4E5DF32466A4DD10562790AEF7CEE900E2B8E
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Firehose Loader...Done
Sending Loader [8937_014.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : 8937, eMMC, 32 GB
LU Count    : 1 [0x03A3E000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device    : asus ASUS_X00ID [msm8937]
Software    : NMF26F.WW_Phone-14.2016.1711.215-20171115, WW_Phone-14.2016.1711.215-20171115 [Wed Nov 15 22:14:52 CST 2017]
Android Ver.    : 7.1.1
Patch Level    : 2017-11-01
Resetting FRP Lock......Done
Operation Finished.

Module Ver. 2.1

ZC553KL
Asus Zenfone 3 Max 7.1.1

QC FRP RESET - X00DDA

Port    : Fastboot Interface
Baud Rate    : Not Applicable
Device    : Generic
Operation    : Qualcomm FRP Reset
Searching for Device in FastBoot Mode... OK
Reading Information... OK
FastBoot Ver.    : 0.5
Product    : QC_REFERENCE_PHONE
Warranty    : Yes
Bootloader    : Locked
Bootloader is Locked. FRP Reset may fail!
Removing FRP Lock... Done
Operation Finished.
Elapsed Time: 00:02
[Module Ver. 4.9.1]
Log Saved to Logs\180507_120021.log

Remoção conta FRP ASUS ZD551KL

Port    : Fastboot Interface
Baud Rate    : Not Applicable
Device    : Generic
Operation    : Qualcomm FRP Reset
Searching for Device in FastBoot Mode... OK
Reading Information... OK
FastBoot Ver.    : 0.5
Product    : MSM8916
Bootloader    : Locked
Bootloader is Locked. FRP Reset may fail!
Removing FRP Lock... Done
Operation Finished.
Elapsed Time: 00:02
[Module Ver. 4.8]
Log Saved to Logs\180514_085200.log
Screenshot copied on clipboard.

FLASH  NO LG  D340f8

 

Port    : COM69 : LGE AndroidNet USB Serial Port (COM69)
Baud Rate    : 115200 - Auto
Device    : LG D380
Operation    : Write Firmware
Opening Port...OK
Reading Information...OK
Model    : LG-D340f8
PID    : 
IMEI    : 352941061140041
Firmware    : D340f810b
Factory Ver.    : LGD340f8AT-00-V10b-SCA-XXX-APR-25-2014+0
LAF Ver.    : 1.0
Chipset    : msm8610
Operator    : GLOBAL
Country    : COM
Memory ID    : K5XVMB
Capacity    : 3,64 GB
Battery    : 100%
Analyzing KDZ Firmware...
Loading DZ Firmware...Loaded 30 Partition(s)
Model    : LG-D340f8
Version    : D340f810b
Reading Partition Table...OK
Setting Parameters...Done
Formatting [userdata]...Done
Formatting [encrypt]...Done
Writing 01 of 30 [PrimaryGPT]...Done
Writing 02 of 30 [modem]...Done
Writing 03 of 30 [sbl1]...Done
Writing 04 of 30 [rpm]...Done
Writing 05 of 30 [tz]...Done
Writing 06 of 30 [sdi]...Done
Writing 07 of 30 [aboot]...Done
Writing 08 of 30 [rpmb]...Done
Writing 09 of 30 [tzb]...Done
Writing 10 of 30 [abootb]...Done
Writing 11 of 30 [persist]...Done
Writing 12 of 30 [laf]...Done
Writing 13 of 30 [boot]...Done
Writing 14 of 30 [recovery]...Done
Writing 15 of 30 [factory]...Done
Writing 16 of 30 [sbl1b]...Done
Writing 17 of 30 [cust]...Done
Writing 18 of 30 [system]...Done
Writing 19 of 30 [system]...Done
Writing 20 of 30 [system]...Done
Writing 21 of 30 [system]...Done
Writing 22 of 30 [system]...Done
Writing 23 of 30 [system]...Done
Writing 24 of 30 [system]...Done
Writing 25 of 30 [system]...Done
Writing 26 of 30 [system]...Done
Writing 27 of 30 [system]...Done
Writing 28 of 30 [system]...Done
Writing 29 of 30 [system]...Done
Writing 30 of 30 [BackupGPT]...Done
Reading Partition Table...OK
Formatting [mpt]...Done
Finalizing Parameters...Done
Rebooting Device...Done
Operation Finished.
Time taken: 05:57
[Module Ver. 0.3]
Log Saved to Logs\180511_114744.log

reset samsung g3502t 

 

Reset FRP ZE554KL  usando modelo Z012DC

 

Port    : Fastboot Interface
Baud Rate    : Not Applicable
Device    : ASUS Z012DC
Operation    : FRP Reset
Searching for Device in FastBoot Mode... OK
Reading Information... OK
FastBoot Ver.    : GetVar Variable Not found
Product    : QC_Reference_Phone
Bootloader    : Locked
Enabling ADB... OK
Searching for Device... Found
Model    : ASUS_Z01KD
Version    : 7.1.1
Hardware    : qcom
Baseband    : M3.7.37.1-Titan_004501
CPU    : arm64-v8a
SIM Card    : ABSENT,ABSENT
Type    : Unknown
MEID(1)    : Null/Empty
Resetting FRP Lock... OK
Now Goto Menu > Settings > Backup and Reset > Factory data reset.
Operation Finished.
Elapsed Time: 00:50
[Module Ver. 4.9.1]
Log Saved to Logs\180526_153856.log

FRP Moto X4 XT1900-6

 

Port    : Fastboot Inteface
Baud Rate    : Not Applicable
Device    : Motorola
Operation    : New FRP Reset
Searching for Device in FastBoot Mode... OK
Reading Phone Information...
Model    : XT1900-6
Boot Ver.    : MBM-3.0-uefi-641a15b-180131
Baseband    : M660_7036.16.01.69R PAYTON_LATAMDSDS_CUST
Software    : Blur_Version.27.241.9.payton.retail.en.US
IMEI    : 12346789
CPU    : SDM630 1.0 (6)
RAM    : 3GB SAMSUNG LP4x DIE=12Gb M5=01 M6=06 M7=00 M8=0E
EMMC    : 32GB SAMSUNG DD68MB RV=08 PV=02 FV=0000000000000002
Setting Factory Mode... OK
Searching Network Interface... Found
Connecting to device... OK
Model    : moto x4
Bootloader    : MBM-3.0-uefi-641a15b-180131
Baseband    : M660_7036.16.01.69R PAYTON_LATAMDSDS_CUST
Build    : Blur_Version.27.241.9.payton.retail.en.US
Android    : 8.0.0
Searching Network Interface... Found
Connecting to device... OK
Model    : moto x4
Bootloader    : MBM-3.0-uefi-641a15b-180131
Baseband    : M660_7036.16.01.69R PAYTON_LATAMDSDS_CUST
Build    : Blur_Version.27.241.9.payton.retail.en.US
Android    : 8.0.0
Operation Finished.
Elapsed Time: 02:28
[Module Ver. 5.0]

Editado Junho 5, 2018 7 anos por William Ferreira

Reparo de boot do aparelho LG D385

Aparelho não ligava, nem mostrava carregando>

Operation    : Flash
Checking for existing devices...Found
Port    : Qualcomm HS-USB QDLoader 9008 (COM97)
Driver Info    : HS Corporation, ghsser.sys, 10.2104.1.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID    : E1108100 [8x26] 00000000
OPK_DATA    : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Firehose Loader...Done
Sending Loader [8x26.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : 8x10, eMMC, ERASED GPT
Payload Info    : In: 262144 [4096], Out: 49152, Sector Size: 512
Writing [PrimaryGPT_0.bin] -> [PrimaryGPT] ...Done
Writing [modem_8192.bin] -> [modem] ...Done
Writing [sbl1_139264.bin] -> [sbl1] ...Done
Writing [rpm_141312.bin] -> [rpm] ...Done
Writing [tz_142336.bin] -> [tz] ...Done
Writing [sdi_143360.bin] -> [sdi] ...Done
Writing [aboot_144384.bin] -> [aboot] ...Done
Writing [rpmb_148480.bin] -> [rpmb] ...Done
Writing [tzb_149504.bin] -> [tzb] ...Done
Writing [abootb_150528.bin] -> [abootb] ...Done
Writing [persist_204800.bin] -> [persist] ...Done
Writing [laf_270336.bin] -> [laf] ...Done
Writing [boot_319488.bin] -> [boot] ...Done
Writing [recovery_364544.bin] -> [recovery] ...Done
Writing [factory_475136.bin] -> [factory] ...Done
Writing [sbl1b_581632.bin] -> [sbl1b] ...Done
Writing [cust_655360.bin] -> [cust] ...Done
Writing [BackupGPT_15268864.bin] -> [BackupGPT] ...Done
Resetting device...Done
Operation Finished.
Module Ver. 2.3

reset frp multilasr ms55 

Operation : Reset FRP
CPU : MT6580
Storage : EMMC
DA : MTK_AllInOne_DA.bin [MTK_AllInOne_DA_v3.3001.2017-12-29.16:29]
Waiting for Phone in BROM Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek PreLoader USB VCOM (Android) (COM40)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Driver: MediaTek Inc., usb2ser.sys, 3.0.1504.0
Syncing with Target...
Reading Partition Table...
Reading Device Information...
Brand : Multilaser
Manufacturer : Multilaser
Model : MS55
Prod. Name : MS55
Device : MS55
Board : Android
Platform : mt6580
Android Ver. : 5.1
Display ID : MS55.V13_20170225
Patch Level : 2017-02-05
Userdata is NOT ENCRYPTED
Resetting FRP...
FRP Reset Done.
Disconnect Battery/Cable and Power On Phone.
[Ver. 1.4]

Lenovo VIBE B  FRP RESET

 

Procedimento:  clique em RESET FRP e connecte o cabo usb com a bateria inserida.

 

Operation : Reset FRP
CPU : MT6735M
Storage : EMMC
DA : DA_SWSEC_LEN2.bin [MTK_AllInOne_DA_v3.3001.00.00]
Waiting for Phone in BROM Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek PreLoader USB VCOM (Android) (COM6)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Driver: MediaTek Inc., usb2ser.sys, 3.0.1504.0
Syncing with Target...
Reading Partition Table...
Reading Device Information...
Brand : Lenovo
Manufacturer : LENOVO
Model : Lenovo A2016b30
Prod. Name : A2016b30
Device : A2016b30
Board : A2016b30
Platform : mt6735m
Android Ver. : 6.0
Display ID : A2016b30_S163_160906_8G_LATAM
Patch Level : 2016-07-05
Userdata is NOT ENCRYPTED
Resetting FRP...
FRP Reset Done.
Disconnect Battery/Cable and Power On Phone.
[Ver. 1.5]

 

 

Editado Julho 6, 2018 7 anos por ToninhoSantos

K130F (K4)

Usando os seguinte arquivo loader do modelo CAT S40 https://www.clansoft.net/dl/index.php?a=downloads&b=file&id=3553 e com ajuda de nosso amigo Bruno Santana

 

Operation    : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM126)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.0.8.7
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID    : E1009600 [8909] 00000000
OPK_DATA    : 8F1359FD1554B6295A938DC2BCAA90ADE0D790FD1A7758B0A007AFE1F5FF0DC5
Initializing Protocol...OK
Sending Loader [Qualcomm_Factory_Loader_MSM8909_Cat_S40.mbn]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : 8909, eMMC, 16 GB
LU Count    : 1 [0x01D5C000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device    : BullittGroupLimited S40 [msm8909]
Software    : LTE_D0201121.0_S40_0.030.01, 2085 [Thu Oct 26 19:06:23 CST 2017]
Android Ver.    : 5.1
Patch Level    : 2017-10-01
Resetting FRP Lock......Done
Operation Finished.

Reset FRP Mi Max 2 

 

Operation    : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM77)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...Ignored
Init Handshake Sequence...OK
Hardware ID    : E1600400 [8953] 00000000
OPK_DATA    : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Firehose Loader...Done
Sending Loader [8953.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : 8953, eMMC, 64 GB
LU Count    : 1 [0x0747C000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device    : Xiaomi MI MAX 2 [msm8953]
Software    : NMF26F, V9.5.5.0.NDDMIFA [Thu May 24 22:58:04 CST 2018]
Android Ver.    : 7.1.1
Patch Level    : 2018-05-01
Resetting FRP Lock.......Done
Operation Finished.
Module Ver. 2.3

Reset FRP HOMTOM S9 Plus 

 

Operation : Reset FRP
CPU : MT6750T
Storage : EMMC
DA : DA_PL.bin [MTK_AllInOne_DA_v3.3001.00.00]
Waiting for Phone in BROM Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek PreLoader USB VCOM (Android) (COM49)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Driver: MediaTek Inc., usb2ser.sys, 3.0.1504.0
Syncing with Target...
Reading Partition Table...
Reading Device Information...
Brand : HOMTOM
Manufacturer : HOMTOM
Model : S9 Plus
Prod. Name : S9 Plus
Device : S9 Plus
Board : S9 Plus
Platform : mt6750
Android Ver. : 7.0
Display ID : HOMTOM_S9_Plus_V01_20171028
Patch Level : 2017-07-05
Userdata is ENCRYPTED
Resetting FRP...
FRP Reset Done.
Disconnect Battery/Cable and Power On Phone.
[Ver. 1.5]
 

UMT MTK MODULE

MODELO: MS50

Brand : Multilaser
Model : MS50M
Operation : Reset FRP
Qt: Untested Windows version 6.2 detected!
Waiting for Phone in BROM Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek PreLoader USB VCOM (Android) (COM4)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Driver: MediaTek Inc., usb2ser.sys, 3.0.1504.0
Syncing with Target...
Reading Partition Table...
Reading Device Information...
Brand : Multilaser
Manufacturer : Multilaser
Model : MS50M
Prod. Name : MS50M
Device : MS50M
Board : MS50M
Platform : mt6580
Android Ver. : 5.1
Display ID : MS50M.V4_20160622
Patch Level : 2016-04-01
Userdata is NOT ENCRYPTED
Resetting FRP...
FRP Reset Done.
Disconnect Battery/Cable and Power On Phone.
[Ver. 1.5]
 

Em 02/08/2018 em 15:56, Clicerio Domingos disse:

Boa tarde. Meu amigo tem como o senhor me dizer como gerou essa port de comunicação? (ou seja, em qual modo ele ficou - Factory mode, fastboot, bp tool).

Só conectar em modo factory amigo e fazer o mesmo procedimento do print. 

Reset FRP Xiaomi Mi A1 Android 8.0

 

Operation    : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM77)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...Ignored
Init Handshake Sequence...OK
Hardware ID    : E1600400 [8953] 00000000
OPK_DATA    : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Firehose Loader...Done
Sending Loader [8953.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : 8953, eMMC, 64 GB
LU Count    : 1 [0x0747C000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device    : Xiaomi Mi A1 [msm8953]
Software    : OPR1.170623.026.V9.5.11.0.ODHMIFA, V9.5.11.0.ODHMIFA [Fri May  4 18:00:46 WIB 2018]
Android Ver.    : 8.0.0
Patch Level    : 2018-05-05
Resetting FRP Lock......Done
Operation Finished.
Module Ver. 2.6

reset frp zte z799vl 
 

 

Reset FRP MS55M

 

Operation : Reset FRP
CPU : MT6580
Storage : EMMC
DA : DA_SWSEC_6580_98737_71604.bin [MTK_AllInOne_DA_v3.3001.00.00]
Waiting for Phone in BROM Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek PreLoader USB VCOM (Android) (COM123)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Driver: MediaTek Inc., usb2ser.sys, 3.0.1504.0
Syncing with Target...
Reading Partition Table...
Reading Device Information...
Brand : Multilaser
Manufacturer : Multilaser
Model : MS55M
Prod. Name : MS55M
Device : MS55M
Board : MS55M
Platform : mt6580
Android Ver. : 7.0
Display ID : MS55M.V11_20171019
Patch Level : 2017-06-05
Userdata is NOT ENCRYPTED
Resetting FRP...
FRP Reset Done.
Disconnect Battery/Cable and Power On Phone.
[Ver. 1.5]
 

Reset FRP Moto C XT1558

 

Brand : Motorola
Model : XT1757
Operation : Reset FRP
Waiting for Phone in BROM Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek PreLoader USB VCOM (Android) (COM123)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Driver: MediaTek Inc., usb2ser.sys, 3.0.1504.0
Syncing with Target...
Reading Partition Table...
Reading Device Information...
Brand : motorola
Manufacturer : motorola
Model : Moto C
Prod. Name : namath_58
Device : namath
Platform : mt6737m
Android Ver. : 7.0
Display ID : NRD90M.010
Patch Level : 2017-07-05
Userdata is NOT ENCRYPTED
Resetting FRP...
FRP Reset Done.
Disconnect Battery/Cable and Power On Phone.
[Ver. 1.5]
 

frp j105b 

 

Reparo boot XT1640 100% done 

 

 

Model    : XT1643
Operation    : Boot Repair
Checking for existing devices...Found
Port    : Qualcomm HS-USB QSC Diagnostics 9065 (COM77)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID    : E1209700 [8952] 00002803
OPK_DATA    : 617E50AB1CB133CC88721091CD79DBC95BF9A3B84FA9489DA856F25CAD8A384B
Initializing Protocol...OK
Sending Loader...Done
Executing Loader...OK
CPU Version    : 1.1
Secure    : Yes
Chipset    : 8952
Chip Type    : eMMC
Protocol    : 1
Payload    : 4096/1048576
Sectors    : 61071360
Sector Size    : 512
Reading Partition Table...OK
Writing Data [aboot]...Done
Writing Data [rpm]...Done
Writing Data [tz]...Done
Writing Data [hyp]...Done
Writing Data [cmnlib]...Done
Writing Data [keymaster]...Done
Writing Data [sbl1]...Done
Rebooting device to Fastboot...Done
Please use UMT GSM Module to flash latest firmware now.
Operation Finished.
Module Ver. 2.6

FRP XT1603 MOTOG 4PLAY 100%