Neste tópico postar somente Atualizações Cyclone BOX - Cyclone Team

Vamos manter o fórum 100% organizado

Cyclone Update Beta test

here is beta version, you can use it to unlock 5800, n96, e75, ini/vpl parser,etc:

http://www.cyclonebox.com/downloads/Cyclone7828NCK.rar

Official rls will come shorlty after this.

Don't forget to upgrade your box fw before use to v1.0.5

Br.

New Bulk Update for Cyclone Box is ready, this includes:

1. New Cyclone Box Firmware v1.06 is avaiable on our server, upgrade it through Box Maintenance

- BB5 Booting for 5800,N97,5220 and others fixed

- Fixed problem when box has been hanging up during BB5 boot

procedure.

- Meaning of "Repower on boot" button has been inverted. That means,

BB5 phones are now by default repowered during boot (more stability

while dealing with dead / stucked / unbootable phones).

- Fixed box stability during 1208 flash and CP extract, no more

"Failed to set Flashbus baud"

- General Improved FBUS Stack stability

- Code revised

- Small speed improvment during BB5 TX2 Flashing

- Minor changes/bugfixes

2. Support for new DCT4Plus phones unlock/relock/autolock:

RM-305 1650 v5.91

RH-105 1208 v5.91

RH-105 1209 v5.91

RM-298 2630 v7.60

RM-299 2630b v7.60

RM-258 2760 v7.60

RM-258 2760b v7.60

RH-64 1600 v6.46

RH-92 1100ib v6.46

RH-93 1100i v6.46

RM-291 v06.81 (missing partial)

5. New DCT4 Loaders v7.49.00 introduced, this adds support for new flash chips.

6. Added new DCT4 UEM CBUS Loaders - ASIC11 UEM IMEI Read problems fixed.

7. New BB5 Loaders introduced, adds support for new flash chips. Note that greatly speed improvment was noticed during flash RAP3v3 phones with "slow" samsung flash chip - 00ec2208 - this includes 5200,5310,etc.

8. Old updates also included in this bulkupdater, this includes BB5 RAPIDO NCK Calculator, and DCT4Plus Unlock patches released before (after installer):

RM-392 2680 v6.17

RM-393 2680b v6.17

RM-392 2680 v5.28

RM-393 2680 v5.28

RM-362 5000d v6.31

RM-363 5000db v6.31

Download bulkupdater from : http://rapidshare.com/files/26579434...te10082009.exe

Size - 15MBytes

(trafficshare download, you don't need have rapidshare account to download updater).

Run it and click INSTALL, all patches will be applied automaticlly.

Best Regards,

CT,

Stay tuned.

13-08-2009 Next Bulk Update, RAPU-YAMA supported for FBUS Flash

Hello,

New BULK UPDATE for Cyclone Box is avaiable, changelog:

- Introduced support for FBUS Flashing RAPU YAMA phones (5630, 6700, 6303)

- GUI Stability improved ; updated Skins Stack

- Fixed Algoboot for BB5 phones in some configurations

- SingleLine BB5 Flashing Speed improved (upgraded to 5.5mbits from 4mbits)

- BB5 Multi-CRT Write bug fixed (mismatched certs when writing more than 1 certs at one time)

- Improved Phone LOCAL/TEST Mode Entry algorithms during unlock and FBUS operatinos

- Access Violation in some configurations, when changing BB5 Vpl / Dct4 Vpl Variant/Product - fixed

- "Set factory defaults - BB5" are now default unticked after flash (useless in case of BB5 phones)

- Repower on boot inverted ; accoring to firmware v1.0.5 , BB5 Phones are now default re-powered on boot

- By default - USE DEFAULT PROFILE while unlocking DCT4Plus is unticked

- DCT4Plus unlock routines rewritten - patch file is now applied before unlocking

- Fixed problems upon unlocking some units of DCT4(plus) phones, when Initial SP Area is corrupted

- When SIMLOCK IS NOT ACCEPTED during BB5 RPL Write, software trying to write FBUS part again after FLASHBUS part, so if NPC is corrupted, the SL will be restored anyway

- Please don't use "Erase Security" function when writing BB5 PA_SL2 RPL, because SIMLOCK will not be accepted in such case! In order of simlock rebuild, NPC MUST BE CORRECT!

- Improved BB5 RPL Write, when HWC can't be written (N96 - example), other certs being written and whole procedure is not being skipped

- After sending Simlock and Superdongle data, delay added, so PA_SL can recalculate SP and Recreate 308 if needed (previously it wasn't working all times)

- During BB5 Configuration Parse (flash chips, status), now RAM chip is displayed instead of UNKNOWN

- DCT4Plus Security Status is now being displayed upon unlock - either TAMPERED or NOT TAMPERED

- When DCT4Plus Security is NOT TAMPERED, Cyclone automatically makes Security Backup

- When user trying to unlock phone which have protected PM308 Security Block against modification, and there is message "Failed to write Security Block" software is now automaticlly writing back NPC backup - IMEI

- Erase Security while writing RPL is now by default disabled

- SX4 Bypass during PA_SL2 unlock is now by default disabled

- IMEI 1234567890?, and "?" is not valid integer bug fixed

- Cyclone Box HW Rev A113 support added

- Cyclone Box HW Rev A114 support added

- Cyclone Box HW Rev A115 support added

Example 5630 RAPU Flashed:

Scanning avaiable products...

Processing C:\Program Files\Nokia\Phoenix\Products\...

Processing C:\Program Files\Common Files\Nokia\DataPackage\Products\...

Found 114 products, Filtering BB5 Products - wait...

36 Products left after filtering. Ready.

Retrieving Variants for Product RM-431 - wait...

53 Variants Retrieved

Processing pre flash tasks...

Pre flash tasks finished, continuing...

Processing rm431_012.008_prd.core.fpsx (CMT)...

Booting RAP...

CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102011104

CMT_EM_ASIC_ID: 00000C34

CMT_EM_ASIC_ID: 00000C30

CMT_PUBLIC_ID: 1CE001126A2F0344C02621363B888F748DD36748

CMT_ASIC_MODE_ID: 00

CMT_ROOT_KEY_HASH: 25B977A055BE9B5DEC0C38A2A279C695

CMT_ROM_ID: 3E273BF637BE26FA

rm431_012.008_prd.core.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5

RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5

Flashbus Write baud set to 650Kbits

Flashbus Read baud set to 98Kbits

FlashChip[0,CMT]: 0x00EC004000800121, Samsung, ONENAND

FlashContent[0,CMT]: 00000000000000000000000000000000, ONENAND

FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC

Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit

RAPUv11_algo_xsr16.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: XSR 1.6

Flashbus Write baud set to 2.0Mbits

Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit

Box TX2 Data Pin set to: Service Pin 3

Box VPP disabled

Internal CMT Phone VPP Enabled

PAPUBKEYS Hash for CMT: 8B5237A1F5B38048C11FB4A6B04AE1CDD3C480E2

Flashbus Write baud set to 5.0Mbits

Sending Certificates...

Certificates OK

Partitioning...

Partitioning OK

Started group flash erase

EraseArea[0,CMT]: 0x00020000-0x0003FFFF, ONENAND

EraseArea[0,CMT]: 0x00060000-0x004DFFFF, ONENAND

EraseArea[0,CMT]: 0x008E0000-0x0A87FFFF, ONENAND

Erase Partition (CMT)

Waiting 320s for erasure finish...

Erase taken 0.922s

Writing all blocks...

Writing CMT ADA Certificate...

Writing CMT KEYS Certificate...

Writing CMT PRIMAPP Certificate...

Writing CMT RAP3NAND Certificate...

Writing CMT SOS+PMML Certificate...

Writing CMT PASUBTOC Certificate...

Writing CMT PAPUBKEYS Certificate...

Writing CMT GENIO_INIT Certificate...

Writing CMT SOS*UPDAPP Certificate...

Writing CMT SOS*DSP0 Certificate...

Writing CMT LDSP Certificate...

Writing CMT SOS*ISASW Certificate...

Writing CMT SOS+CORE Certificate...

Writing CMT SOS+ROFS1 Certificate...

Programming Status OK!

All blocks written OK! Time taken 107.469s

Restarting MCU...

Processing rm431_012.008_prd.core.fpsx (APE)...

Processing rm431_012.008_06.01_Euro3_prd.rofs2.fpsx (CMT)...

Booting RAP...

CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102011104

CMT_EM_ASIC_ID: 00000C34

CMT_EM_ASIC_ID: 00000C30

CMT_PUBLIC_ID: 1CE001126A2F0344C02621363B888F748DD36748

CMT_ASIC_MODE_ID: 00

CMT_ROOT_KEY_HASH: 25B977A055BE9B5DEC0C38A2A279C695

CMT_ROM_ID: 3E273BF637BE26FA

rm431_012.008_06.01_Euro3_prd.rofs2.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5

RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5

Flashbus Write baud set to 650Kbits

Flashbus Read baud set to 98Kbits

FlashChip[0,CMT]: 0x00EC004000800121, Samsung, ONENAND

FlashContent[0,CMT]: 00000000000000000000000000000000, ONENAND

FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC

Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit

RAPUv11_algo_xsr16.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: XSR 1.6

Flashbus Write baud set to 2.0Mbits

Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit

Box TX2 Data Pin set to: Service Pin 3

Box VPP disabled

Internal CMT Phone VPP Enabled

PAPUBKEYS Hash for CMT: 8B5237A1F5B38048C11FB4A6B04AE1CDD3C480E2

Flashbus Write baud set to 5.0Mbits

Started group flash erase

EraseArea[0,CMT]: 0x06480000-0x09A7FFFF, ONENAND

Waiting 320s for erasure finish...

Erase taken 0.297s

Writing all blocks...

Writing CMT SOS+ROFS2 Certificate...

Programming Status OK!

All blocks written OK! Time taken 57.484s

Restarting MCU...

Processing rm431_012.008_06.01_Euro3_prd.rofs2.fpsx (APE)...

Processing rm431_012.008_C03.01_BLUE_prd.rofs3.fpsx (CMT)...

Booting RAP...

CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102011104

CMT_EM_ASIC_ID: 00000C34

CMT_EM_ASIC_ID: 00000C30

CMT_PUBLIC_ID: 1CE001126A2F0344C02621363B888F748DD36748

CMT_ASIC_MODE_ID: 00

CMT_ROOT_KEY_HASH: 25B977A055BE9B5DEC0C38A2A279C695

CMT_ROM_ID: 3E273BF637BE26FA

rm431_012.008_C03.01_BLUE_prd.rofs3.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5

RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5

Flashbus Write baud set to 650Kbits

Flashbus Read baud set to 98Kbits

FlashChip[0,CMT]: 0x00EC004000800121, Samsung, ONENAND

FlashContent[0,CMT]: 00000000000000000000000000000000, ONENAND

FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC

Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit

RAPUv11_algo_xsr16.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: XSR 1.6

Flashbus Write baud set to 2.0Mbits

Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit

Box TX2 Data Pin set to: Service Pin 3

Box VPP disabled

Internal CMT Phone VPP Enabled

PAPUBKEYS Hash for CMT: 8B5237A1F5B38048C11FB4A6B04AE1CDD3C480E2

Flashbus Write baud set to 5.0Mbits

Started group flash erase

EraseArea[0,CMT]: 0x09A80000-0x0A87FFFF, ONENAND

Waiting 320s for erasure finish...

Erase taken 0.79s

Writing all blocks...

Writing CMT SOS+ROFS3 Certificate...

Programming Status OK!

All blocks written OK! Time taken 4.953s

Restarting MCU...

Processing rm431_012.008_C03.01_BLUE_prd.rofs3.fpsx (APE)...

Processing rm431_012.008_U000.000_prd.uda.fpsx (CMT)...

Booting RAP...

CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102011104

CMT_EM_ASIC_ID: 00000C34

CMT_EM_ASIC_ID: 00000C30

CMT_PUBLIC_ID: 1CE001126A2F0344C02621363B888F748DD36748

CMT_ASIC_MODE_ID: 00

CMT_ROOT_KEY_HASH: 25B977A055BE9B5DEC0C38A2A279C695

CMT_ROM_ID: 3E273BF637BE26FA

rm431_012.008_U000.000_prd.uda.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5

RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5

Flashbus Write baud set to 650Kbits

Flashbus Read baud set to 98Kbits

FlashChip[0,CMT]: 0x00EC004000800121, Samsung, ONENAND

FlashContent[0,CMT]: 00000000000000000000000000000000, ONENAND

FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC

Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit

RAPUv11_algo_xsr16.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: XSR 1.6

Flashbus Write baud set to 2.0Mbits

Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit

Box TX2 Data Pin set to: Service Pin 3

Box VPP disabled

Internal CMT Phone VPP Enabled

PAPUBKEYS Hash for CMT: 8B5237A1F5B38048C11FB4A6B04AE1CDD3C480E2

Flashbus Write baud set to 5.0Mbits

Started group flash erase

EraseArea[0,CMT]: 0x0A880000-0x0F63FFFF, ONENAND

Waiting 320s for erasure finish...

Erase taken 0.421s

Writing all blocks...

Programming Status OK!

All blocks written OK! Time taken 13.688s

Restarting MCU...

Processing rm431_012.008_U000.000_prd.uda.fpsx (APE)...

All images processed OK! Processing post flash tasks...

Reading info...

MCU Version V ICPR82_09w24.1

MCU Date 15-06-09

Product RM-431

Manufacturer © Nokia

IMEI 359350021136722

Mastercode 3226214523

IMEI Spare 3A95530012317602

IMEI SV 3395530012317632F1000000

PSN CKN036964

Product Code 0564244

Basic Product Code 0559784

PSD 0000000000000000

LPSN 0

WLAN MAC 0025CFDD214E

APE SW 012.008

APE Variant 012.008012.008.06.01012.008.C03.01

APE Test rm431_2009wk10v0.010

APE HW 256

APE ADSP 256

RETU 34

TAHVO 00

AHNE 11

HW 0417

RFIC |Vapaus_5.1 |

DSP ICPR82_09w24_RIO

Simlock Server SIMLOCK SERVER

Simlock Key 2440700000000000

Simlock Profile 0000000000000000

Simlock Key Cnt 0

Simlock FBUS Cnt 0

Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF

Simlock [1,2] State: OPENED Type: GID Data: FFFF

Simlock [1,3] State: OPENED Type: GID Data: FFFF

Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF

Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF

Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF

Simlock [2,2] State: OPENED Type: GID Data: FFFF

Simlock [2,3] State: OPENED Type: GID Data: FFFF

Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF

Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF

Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF

Simlock [3,2] State: OPENED Type: GID Data: FFFF

Simlock [3,3] State: OPENED Type: GID Data: FFFF

Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF

Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF

Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF

Simlock [4,2] State: OPENED Type: GID Data: FFFF

Simlock [4,3] State: OPENED Type: GID Data: FFFF

Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF

Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF

Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF

Simlock [5,2] State: OPENED Type: GID Data: FFFF

Simlock [5,3] State: OPENED Type: GID Data: FFFF

Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF

Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF

Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF

Simlock [6,2] State: OPENED Type: GID Data: FFFF

Simlock [6,3] State: OPENED Type: GID Data: FFFF

Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF

Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF

Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF

Simlock [7,2] State: OPENED Type: GID Data: FFFF

Simlock [7,3] State: OPENED Type: GID Data: FFFF

Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF

Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF

Read info thread finished, continuing...

Post flash tasks finished!

Flashing successfully finished!

Note on flashing RAPU units: make sure you obtained CORRECT FBUS CABLE! UFC No.2 (As we tested) NOT working with RAPU phones, because MBUS line is duplicated. We recommend to use GPG FBUS cables, as we done our tests using their cables.

This is BULK UPDATE, that means you need to download EXE file and click INSTALL. All previously released updates (few days before, rapido nck calc, etc) will be applied automaticlly, loaders will be purged too. You need have only installed installer (this one released in May, avaiable in http://www.cyclonebox.com/downloads/CycloneBoxInstaller.exe )

Download new update from: http://rapidshare.com/files/267002877/CycloneBulkUpdate13082009.exe

26-10-2009 Cyclone Update Strikes Again !!!

Tropical Cyclone Strikes Again !

!!! MAKE SURE YOU UPDATE YOUR BOX FIRMWARE BEFORE USE OF NEW PARTIALS ; OTHERWISE IT WILL FAIL TO SEND SUPER DCT4 EMULATOR !!

Added support for new ASIC 3168 phones/versions, for now Cyclone supports following phones:

RH-86 2610 v07.04a

RH-87 2610b v07.04a

RM-258 2760 v06.82

RM-258 2760 v07.60

RM-259 2760b v06.82

RM-259 2760b v07.60

RM-298 2630 v07.60

RM-298 2630 v57.20

RM-299 2630b v07.60

RM-299 2630b v57.20

RM-340 2600c v06.82

RM-340 2600c v07.60

RM-341 2600c-b v06.82

RM-341 2600c-b v07.60

RM-391 2760h v05.45

RM-392 2680s v06.17

RM-392 2680s v56.17

RM-393 2680s-b v06.17

RM-393 2680s-b v56.17

RM-394 1680c v06.82

RM-394 1680c v07.60

RM-395 1680c-b v06.82

RM-395 1680c-b v07.60

RM-438 7100s v05.22

RM-438 7100s v05.41

RM-438 7100s v06.31

RM-438 7100s v06.32

RM-439 7100s-b v05.22

RM-439 7100s-b v05.41

RM-439 7100s-b v06.31

RM-439 7100s-b v06.32

RM-512 2330c v06.46

RM-512 2330c v06.75

RM-512 2330c v08.20

RM-513 2330c-b v06.46

RM-513 2330c-b v06.75

RM-513 2330c-b v08.20

RM-514 2320c v06.75

RM-514 2320c v08.20

RM-515 2320c-b v06.75

RM-515 2320c-b v08.20

RM-519 2720f v08.20

RM-520 2720f-b v08.20

RM-543 2323c v06.75

RM-543 2323c v08.20

RM-544 2323c-b v06.75

RM-544 2323c-b v08.20

Download updater from : http://rapidshare.com/files/29812993...te26102009.exe

!!! MAKE SURE YOU UPDATE YOUR BOX FIRMWARE BEFORE USE OF NEW PARTIALS ; OTHERWISE IT WILL FAIL TO SEND SUPER DCT4 EMULATOR !!

Br,

Cyclone Team,

More comming shortly !!

"New Cyclone Box Firmware v1.06"

Cyclone Box Bulk Update Released

New Bulk Update for Cyclone Box is ready, this includes:

1. New Cyclone Box Firmware v1.06 is avaiable on our server, upgrade it through Box Maintenance

- BB5 Booting for 5800,N97,5220 and others fixed

- Fixed problem when box has been hanging up during BB5 boot

procedure.

- Meaning of "Repower on boot" button has been inverted. That means,

BB5 phones are now by default repowered during boot (more stability

while dealing with dead / stucked / unbootable phones).

- Fixed box stability during 1208 flash and CP extract, no more

"Failed to set Flashbus baud"

- General Improved FBUS Stack stability

- Code revised

- Small speed improvment during BB5 TX2 Flashing

- Minor changes/bugfixes

2. Support for new DCT4Plus phones unlock/relock/autolock:

RM-305 1650 v5.91

RH-105 1208 v5.91

RH-105 1209 v5.91

RM-298 2630 v7.60

RM-299 2630b v7.60

RM-258 2760 v7.60

RM-258 2760b v7.60

RH-64 1600 v6.46

RH-92 1100ib v6.46

RH-93 1100i v6.46

RM-291 v06.81 (missing partial)

5. New DCT4 Loaders v7.49.00 introduced, this adds support for new flash chips.

6. Added new DCT4 UEM CBUS Loaders - ASIC11 UEM IMEI Read problems fixed.

7. New BB5 Loaders introduced, adds support for new flash chips. Note that greatly speed improvement was noticed during flash RAP3v3 phones with "slow" samsung flash chip - 00ec2208 - this includes 5200,5310,etc.

8. Old updates also included in this bulkupdater, this includes BB5 RAPIDO NCK Calculator, and DCT4Plus Unlock patches released before (after installer):

RM-392 2680 v6.17

RM-393 2680b v6.17

RM-392 2680 v5.28

RM-393 2680 v5.28

RM-362 5000d v6.31

RM-363 5000db v6.31

link para download:

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

ou

V 1.05 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

V 1.06 :xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

"Mas uma vez, Clan Gsm na frente!"

nem no suporte da box tem esta versão, ainda esta na 1.04.

Não poste link's EXTERNOS, AQUI é REGRA!

Colabore.

Instalação Box Firmware v1.06

Ghost Rider

amigo a onde eu abaixo esta atualização?

amigo a onde eu abaixo esta atualização?

Segui o arquivo para Download;

[DOWNLOAD]http://cyclonebox.com/downloads/CycloneBulkUpdate26102009.exe[/DOWNLOAD]

** Cyclone Shot, "SL3" Unlock and more... **

Hi,

First of all, happy new year to all of our customers.

New Cyclone Installer v1.03 is ready (final installer, no bulk updates needed).

=====================

Installer v1.03

02.01.2010

=====================

- Added new BB5 Unlock,Relock,Autolock,Repair Method by RPL Generation, this uses server and consumes 10 logs whilst your credits amount must be > 100.

- Supported are ALL PA_SL2 Phones, both RAPv3 and RAPIDO, with following hashes:

9A28E119033B91D14D22838C86D0D53C

9DDBFCFE6E73CED7D8C6268C8EB85723

38F312750F686F9FC9B1B3778774A195

BAF3A9C3DBFA8454937DB77F2B8852B1

CAEEBB65D3C48E6DC73B49DC5063A2EE

F2D76DFAFD66C7F195F278417DF05888

F682624FFB08F6D955DBE7D9C0485084

FCB5C510AF7F09F313D9BDE85A707CC0

- Before unlock software will ask you (when possible) if you want RPL calculation. If you don't need unlocking by RPL, simply click NO and old free unlocking methods will be used (PM308+120 recalc, Secure RAM dump and NCK calc on RAPIDO PA_SL2 phones, etc). However there are some phones which might be unlocked only using new method (9DDB - 3600,5220,7310, or new 5800 >v.30, new N96, etc)

- After unlock, requested RPL file will be saved to STORED FILES dir, it might be used later after phone chip erase, etc - as a generic backup

- To Autolock/Relock use "Import SL5" function and point to SL5 array file in "UnlockData" dir, with SW comes few generated files

- If you need SL5 file for your network, use "Create SL5" button and enter MCC-MNC, SL5 file will be generated for you and your phone might be relocked

- SL Area might be repaired using UNLOCK button for SL2 phones

- RPL Write bugs fixed ("simlock not accepted" after few tries)

- Path "/" problem fixed

- Memory manager updated to v4.94

- New skin manager introduced (6.53) - removed flash files selection bugs

- GUI redesigned a bit

- Nokia Connectivity Cable Driver updated to v7.1.22

- 2760h RM-391 v06.83 Unlock / Relock added

- 2330c RM-512 v09.55 Unlock / Relock added

- 2330c-b RM-513 v09.55 Unlock / Relock added

- 2720f RM-519 v08.42 Unlock / Relock added

- 2720f-b RM-519 v08.42 Unlock / Relock added

- 2720f RM-519 v09.55 Unlock / Relock added

- 2720f-b RM-519 v09.55 Unlock / Relock added

- SX4 Bypass during BB5 Unlock removed, is no needed anymore

- Fixed USB stack hanging up on some Windows configuration due to invalid hexcodes in BoardCode Revision USB Field

- After Super DCT4 Activation in Credits tab box Security Page is automaticlly upgraded, no need doing it manually

- New firmware v01.15 introduced - box can switch itself from MAIN mode to BOOT mode (no USB reconnect needed anymore)

- 6220c,3600s booting fixed in new firmware

- New Secure bootloader v02.10 introduced

- New bootloader supports more types of smartcards (autobaud, PTS protocol negotiation, etc)

- Secure BootAgent v1.00 introduced in new firmware

- Firmware RTOS Code Updated to v6.0.1

- Slightly code optimizations and stability improvments in new firmware

- Secure Bootloader upgrade introduced after box maintenance

- Added support for Cyclone box HW REV A116, A117, A118, A119, A11A, A11B, A11C

Here is example phones unlocked by new RPL Method,

5800 SW v31.x:

BB5 Unlock Started...
MCU Version V ICPR72_09w20.8
MCU Date 09-07-09
Product RM-356
Manufacturer (c) Nokia
IMEI 353205037049770
Mastercode 323571474
Simlock Server SIMLOCK SERVER
Simlock Key 2600300000000000
Simlock Profile 8000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: CLOSED Type: MCC-MNC Data: 26003F
Reading Security Block...
Security block OK!
Determining PA Simlock...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101031103
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 16900018F3740052C3ECA61A74BBE7E9A3A34FCE
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID: 4B9B75103E691FF8
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC004000800121, Samsung, ONENAND
FlashContent[0,CMT]: 00000000000000000000000000000000, ONENAND
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: XSR 1.5
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 76A20187051C30162EE91C77AE5E6011F5F1BA61
APE Boot skipped on user request
Flashbus Write baud set to 5.0Mbits
Restarting MCU...
Determined PA Simlock: PA_SL2
Checking for Rootkey Hash support and selecting Unlock Method...
Selected Unlock Method: RPL Calculation
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101031103
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 16900018F3740052C3ECA61A74BBE7E9A3A34FCE
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID: 4B9B75103E691FF8
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Exploiting - running preloader...
Preloader running OK, Running Custom Loader...
Custom loader running OK! Working...
Receiving RPL from Server...
Cyclone Server (1.0.0.549), Cyclone Box Team 2008, 2009, 2010 - Ready.
Disconnected from Cyclone Server
Credits Left: 880
Saving RPL File to "RM-356_353205037049770_2010-01-02_015618.Unlock.RPL"
Writing Simlock...
Simlock ACCEPTED OK !
MCU Version V ICPR72_09w20.8
MCU Date 09-07-09
Product RM-356
Manufacturer (c) Nokia
IMEI 353205037049770
Mastercode 323571474
Simlock Server SIMLOCK SERVER
Simlock Key 2440700000000000
Simlock Profile 0000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [1,2] State: OPENED Type: GID Data: FFFF
Simlock [1,3] State: OPENED Type: GID Data: FFFF
Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [2,2] State: OPENED Type: GID Data: FFFF
Simlock [2,3] State: OPENED Type: GID Data: FFFF
Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [3,2] State: OPENED Type: GID Data: FFFF
Simlock [3,3] State: OPENED Type: GID Data: FFFF
Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [4,2] State: OPENED Type: GID Data: FFFF
Simlock [4,3] State: OPENED Type: GID Data: FFFF
Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [5,2] State: OPENED Type: GID Data: FFFF
Simlock [5,3] State: OPENED Type: GID Data: FFFF
Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [6,2] State: OPENED Type: GID Data: FFFF
Simlock [6,3] State: OPENED Type: GID Data: FFFF
Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [7,2] State: OPENED Type: GID Data: FFFF
Simlock [7,3] State: OPENED Type: GID Data: FFFF
Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Unlock finished!

E51:

BB5 Unlock Started...
MCU Version V ICPR71_08w44.4
MCU Date 11-12-08
Product RM-244
Manufacturer (c) Nokia
IMEI 357663016552576
Mastercode 152622740
Simlock Server SIMLOCK SERVER
Simlock Key 2600300000000000
Simlock Profile 8000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: CLOSED Type: MCC-MNC Data: 26003F
Reading Security Block...
Security block OK!
Determining PA Simlock...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101021103
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 0E60010930850058EEBC00CD174EE90CEB054FF0
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID: A8C1D6713E691FF8
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC004000600022, Samsung, ONENAND
FlashContent[0,CMT]: 00000000000000000000000000000000, ONENAND
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: XSR 1.5
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 35AC54F8E31BE1357AB78D73834F020906331653
APE Boot skipped on user request
Flashbus Write baud set to 5.0Mbits
Restarting MCU...
Determined PA Simlock: PA_SL2
Checking for Rootkey Hash support and selecting Unlock Method...
Selected Unlock Method: RPL Calculation
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101021103
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 0E60010930850058EEBC00CD174EE90CEB054FF0
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID: A8C1D6713E691FF8
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Exploiting - running preloader...
Preloader running OK, Running Custom Loader...
Custom loader running OK! Working...
Receiving RPL from Server...
Cyclone Server (1.0.0.552), Cyclone Box Team 2008, 2009, 2010 - Ready.
Disconnected from Cyclone Server
Credits Left: 830
Saving RPL File to "RM-244_357663016552576_2010-01-02_051510.Unlock.RPL"
Writing Simlock...
Simlock ACCEPTED OK !
MCU Version V ICPR71_08w44.4
MCU Date 11-12-08
Product RM-244
Manufacturer (c) Nokia
IMEI 357663016552576
Mastercode 152622740
Simlock Server SIMLOCK SERVER
Simlock Key 2440700000000000
Simlock Profile 0000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [1,2] State: OPENED Type: GID Data: FFFF
Simlock [1,3] State: OPENED Type: GID Data: FFFF
Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [2,2] State: OPENED Type: GID Data: FFFF
Simlock [2,3] State: OPENED Type: GID Data: FFFF
Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [3,2] State: OPENED Type: GID Data: FFFF
Simlock [3,3] State: OPENED Type: GID Data: FFFF
Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [4,2] State: OPENED Type: GID Data: FFFF
Simlock [4,3] State: OPENED Type: GID Data: FFFF
Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [5,2] State: OPENED Type: GID Data: FFFF
Simlock [5,3] State: OPENED Type: GID Data: FFFF
Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [6,2] State: OPENED Type: GID Data: FFFF
Simlock [6,3] State: OPENED Type: GID Data: FFFF
Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [7,2] State: OPENED Type: GID Data: FFFF
Simlock [7,3] State: OPENED Type: GID Data: FFFF
Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Unlock finished!

! BOX FIRMWARE UPDATE IS NEEDED TO USE LATEST UPDATE !

Best Regards,

Cyclone Team

(stay tuned.... in January )

[DOWNLOAD]http://cyclonebox.com/downloads/NewCycloneBoxInstaller.exe[/DOWNLOAD]

06/01/2010 CycloneBox STABLE Installer v1.04 Released

=====================

Installer v1.04

06.01.2010

=====================

- Included latest critical hotfix for old BB5 unlocking methods when phone after unlock was still locked, update is highly RECOMMENDED!

[DOWNLOAD]http://www.arybraga.clangsm.net/exe/CycloneBoxInstaller.1.04.exe[/DOWNLOAD]

CYCLONE BOX - FREE (NO CREDITS) SL2 RPL CALC (inc 9ddb) FOR UNLOCK/RELOCK/REPAIR Hi to all

Starting from now all calculated SL2 RPLs using Cyclone Server are FREE.

One condition you need to met, you need have 200 credits on your account.

Stay tuned for some NCK-thing

Best Regards,

Cyclone Team.

Na verdade são 101 créditos e não 200.

24-01-2010 CYCLONE SHOT SLEEPING SHOT! First STANDALONE BB5 NCK Calculator Released!

Hi,

- Added STANDALONE, FREE (NO LOGS, NO INTERNET!!!) NCK Reader (levels.. pw1..7) for ALL BB5 RAPv3 and RAPIDO phones (including 9ddb new hash, together PA_SL1 and PA_SL2 phones)

- Unlocking Method is now being selected before unlock

- Added BB5 RPL Calc for PA_SL1 phones (using server) for Simlock Repair

- Few changes with BB5 booting, minor bugfixes, cosmetic changes, etc

!! FIRMWARE UPGRADE IS MANDATORY IN ORDER TO USE THIS UPGRADE !!

KEEP IN MIND STILL SOME PHONES (I.E. TELCELL MEXICO) CAN'T BE UNLOCKED USING NCK, THIS CASE USE FREE RPLS.

Avaiable Unlock Methods Now:

PM308 Recalculation (Standalone, Free)

NCK Calculation (Standalone, Free, New Method)

NCK Calculation (Standalone, Free, Old Method) Remark: Works only on SL2 Rapido Phones, SW < v30

RPL Calculation (Server Based, Need Credits)

(need select needed unlock method before unlock)

Some phones unlocked by new method of NCK Calculation:

3600 SL2 HASH 9DDB

BB5 Unlock Started...
MCU Version    V 07.23
MCU Date    17-07-09
Product        RM-352
Manufacturer    (c) Nokia            
IMEI        353661016041511
Mastercode    261533754
Simlock Server    SIMLOCK SERVER
Simlock Key    2600300000000000
Simlock Profile    8000000000000000
Simlock Key Cnt    0
Simlock FBUS Cnt    0
Simlock [1,1]    State: CLOSED    Type: MCC-MNC    Data: 26003F
Reading Security Block...
Security block OK!
Determining PA Simlock...
Booting RAP...
CMT_SYSTEM_ASIC_ID:    000000010000022600010006030C192101033000
CMT_EM_ASIC_ID:        00000295
CMT_EM_ASIC_ID:        00000B22
CMT_PUBLIC_ID:        1240001610F05850C9695BBBB518C05E116F9CA1
CMT_ASIC_MODE_ID:    00
CMT_ROOT_KEY_HASH:    9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_BOOT_ROM_CRC:    273F6D55
CMT_SECURE_ROM_CRC:    DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.9.11.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x00EC220C00008921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.9.17.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: E4BA39EE248FC5E165E280B6AD60C5C0B1A1DA6D
APE Boot skipped on user request
Flashbus Write baud set to 5.0Mbits
Restarting MCU...
Determined PA Simlock: PA_SL2
Checking for Rootkey Hash support with selected Unlock Method...
Selected Unlock Method: NCK Calculation (new method)
Booting RAP...
CMT_SYSTEM_ASIC_ID:    000000010000022600010006030C192101033000
CMT_EM_ASIC_ID:        00000295
CMT_EM_ASIC_ID:        00000B22
CMT_PUBLIC_ID:        1240001610F05850C9695BBBB518C05E116F9CA1
CMT_ASIC_MODE_ID:    00
CMT_ROOT_KEY_HASH:    9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_BOOT_ROM_CRC:    273F6D55
CMT_SECURE_ROM_CRC:    DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
Exploiting - running preloader...
Preloader running OK, Running Custom Loader...
Custom loader running OK! Working...
#pw+949788008380325+1#
#pw+854251965631463+2#
#pw+914751634966481+3#
#pw+253083871743310+4#
#pw+160466531792339+5#
#pw+300636055043893+6#
#pw+831255876340647+7#
Sending NCK Code (Level 7)..
NCK Accepted! Phone unlocked OK!
MCU Version    V 07.23
MCU Date    17-07-09
Product        RM-352
Manufacturer    (c) Nokia            
IMEI        353661016041511
Mastercode    261533754
Simlock Server    SIMLOCK SERVER
Simlock Key    2600300000000000
Simlock Profile    8000000000000000
Simlock Key Cnt    0
Simlock FBUS Cnt    0
Simlock [1,1]    State: OPENED    Type: MCC-MNC    Data: 26003F
Simlock NCK    #pw+831255876340647+7#
Unlock finished!

5300 SL1 HASH BAF3

BB5 Unlock Started...
MCU Version    V 07.20
MCU Date    23-10-08
Product        RM-174
Manufacturer    (c) Nokia.           
IMEI        356407014798521
Mastercode    471632634
Simlock Server    SIMLOCK SERVER VERSION 63
Simlock Key    2600600000000000
Simlock Profile    8000000000000000
Simlock Key Cnt    0
Simlock FBUS Cnt    0
Simlock [1,1]    State: CLOSED    Type: MCC-MNC    Data: 26006F
Simlock NCK    #pw+@U˙˙˙˙˙˙˙˙˙˙+17#
Simlock NCK    #pw+˙˙˙˙˙8€+255#
Simlock NCK    #pw+`+38#
Simlock NCK    #pw+˙˙˙ř4&o˙+255#
Reading Security Block...
Security block OK!
Determining PA Simlock...
Booting RAP...
CMT_SYSTEM_ASIC_ID:    000000010000022600010006010C192101001101
CMT_EM_ASIC_ID:        00000232
CMT_EM_ASIC_ID:        00000353
CMT_PUBLIC_ID:        22C000133A0B6E561E7820319A02ED6A64141878
CMT_ASIC_MODE_ID:    00
CMT_ROOT_KEY_HASH:    BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_BOOT_ROM_CRC:    191EC665
CMT_SECURE_ROM_CRC:    DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.9.11.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x00EC220800006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.9.17.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: D6D07E588DC4E06DEE7012A3C0ECC4E35D3CE263
APE Boot skipped on user request
Flashbus Write baud set to 5.0Mbits
Restarting MCU...
Determined PA Simlock: PA_SL
Checking for Rootkey Hash support with selected Unlock Method...
Selected Unlock Method: NCK Calculation (new method)
Booting RAP...
CMT_SYSTEM_ASIC_ID:    000000010000022600010006010C192101001101
CMT_EM_ASIC_ID:        00000232
CMT_EM_ASIC_ID:        00000353
CMT_PUBLIC_ID:        22C000133A0B6E561E7820319A02ED6A64141878
CMT_ASIC_MODE_ID:    00
CMT_ROOT_KEY_HASH:    BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_BOOT_ROM_CRC:    191EC665
CMT_SECURE_ROM_CRC:    DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
Exploiting - running preloader...
Preloader running OK, Running Custom Loader...
Custom loader running OK! Working...
#pw+160352032409019+1#
#pw+973120735381744+2#
#pw+821765151806152+3#
#pw+691221967364775+4#
#pw+282254235199826+5#
#pw+674406233058521+6#
#pw+159388652648611+7#
Sending NCK Code (Level 7)..
NCK Accepted! Phone unlocked OK!
MCU Version    V 07.20
MCU Date    23-10-08
Product        RM-174
Manufacturer    (c) Nokia.           
IMEI        356407014798521
Mastercode    471632634
Simlock Server    SIMLOCK SERVER VERSION 63
Simlock Key    2600600000000000
Simlock Profile    8000000000000000
Simlock Key Cnt    0
Simlock FBUS Cnt    0
Simlock [1,1]    State: OPENED    Type: MCC-MNC    Data: 26006F
Simlock NCK    #pw+@U˙˙˙˙˙˙˙˙˙˙+17#
Simlock NCK    #pw+˙˙˙˙˙8€+255#
Simlock NCK    #pw+`+38#
Simlock NCK    #pw+˙˙˙ř4&o˙+255#
Unlock finished!

E51 SL2 HASH CAEEBB

BB5 Unlock Started...
MCU Version    V ICPR71_08w44.4
MCU Date    11-12-08
Product        RM-244
Manufacturer    (c) Nokia
IMEI        357663016552576
Simlock Server    SIMLOCK SERVER
Simlock Key    2600100000000000
Simlock Profile    8000000000000006
Simlock Key Cnt    0
Simlock FBUS Cnt    0
Simlock [1,1]    State: CLOSED    Type: MCC-MNC    Data: 26001F
Reading Security Block...
Security block OK!
Determining PA Simlock...
Booting RAP...
CMT_SYSTEM_ASIC_ID:    000000010000022600010006400C192101021103
CMT_EM_ASIC_ID:        00000295
CMT_EM_ASIC_ID:        00000B22
CMT_PUBLIC_ID:        0E60010930850058EEBC00CD174EE90CEB054FF0
CMT_ASIC_MODE_ID:    00
CMT_ROOT_KEY_HASH:    CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_BOOT_ROM_CRC:    A8C1D671
CMT_SECURE_ROM_CRC:    3E691FF8
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x00EC004000600022, Samsung, ONENAND
FlashContent[0,CMT]: 00000000000000000000000000000000, ONENAND
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: XSR 1.5
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 35AC54F8E31BE1357AB78D73834F020906331653
APE Boot skipped on user request
Flashbus Write baud set to 5.0Mbits
Restarting MCU...
Determined PA Simlock: PA_SL2
Checking for Rootkey Hash support with selected Unlock Method...
Selected Unlock Method: NCK Calculation (new method)
Booting RAP...
CMT_SYSTEM_ASIC_ID:    000000010000022600010006400C192101021103
CMT_EM_ASIC_ID:        00000295
CMT_EM_ASIC_ID:        00000B22
CMT_PUBLIC_ID:        0E60010930850058EEBC00CD174EE90CEB054FF0
CMT_ASIC_MODE_ID:    00
CMT_ROOT_KEY_HASH:    CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_BOOT_ROM_CRC:    A8C1D671
CMT_SECURE_ROM_CRC:    3E691FF8
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
Exploiting - running preloader...
Preloader running OK, Running Custom Loader...
Custom loader running OK! Working...
#pw+994514387188636+1#
#pw+274615204717885+2#
#pw+842137240978606+3#
#pw+544842230747164+4#
#pw+653436892097337+5#
#pw+113577555381583+6#
#pw+360432392883102+7#
Sending NCK Code (Level 7)..
NCK Accepted! Phone unlocked OK!
MCU Version    V ICPR71_08w44.4
MCU Date    11-12-08
Product        RM-244
Manufacturer    (c) Nokia
IMEI        357663016552576
Simlock Server    SIMLOCK SERVER
Simlock Key    2600100000000000
Simlock Profile    8000000000000006
Simlock Key Cnt    0
Simlock FBUS Cnt    0
Simlock [1,1]    State: OPENED    Type: MCC-MNC    Data: 26001F
Simlock NCK    #pw+360432392883102+7#
Unlock finished!

(REPLACE EXE at C:\Program Files\Cyclone Box\)

Best Regards,

"Sleeping" Cyclone Team

Cyclone BOMB ! Standalone : SX4 Emulation, SD Repair, RPL Calc, BB5 NCK Calc, more!!!

Hello,

New version of Cyclone Box Software is ready. There is a lot of changes, here is some of them:

- WORLD'S UNIQUE : Standalone Superdongle Key Calculator Added! No internet, no logs, no time! Calculation time - 0.003 sec ! Works for any SL1, SL2 and SL3.

- WORLD'S UNIQUE : Standalone Unlocking/Relocking using RPL Added! No internet, no logs, no time! Calculation time - 0.002 sec ! Works for any SL1 and SL2.

- WORLD'S UNIQUE : Standalone SX4 Authorization Added! Box is now emulating Nokia SX4 card - no need internet, no need logs to authorize ANY Nokia Phone, just box! Works for any SL1, SL2 or SL3. Emulated SX4 works with ORIGINAL NOKIA Superdongle keys (no need rebuild SD), Custom keys (made by Cyclone,MT,UB), etc. In case of Authorization fail, it will automaticly write and authorize using Custom Keys. Authoirzation time - 0.004 sec ! Supported are RAP and RAPIDO mcu, in case of RAPU phones SX4 Remote Card will be used. After authorization with Cyclone, PHONE STILL CAN be Authorized with ORIGINAL SX4 Card!

- WORLD'S UNIQUE - Cyclone can now authorize Barred Phones (with Correct superdongle keys, but with higher KeyIndex ever used than 0 (possible KeyIndex 0..7), SX4 card can use any higher keyindex at time, when higher key is used, lower keys are automaticly not used in future, and phone requires to use higher key index) - UB and other custom boxes can't do it as long SX4 emulation is not 100% Nokia-Like

- WORLD'S UNIQUE : Starting from now, Cyclone Box have ability to make _FULL RPL BACKUP_ of BB5 phones! Current existing SW on market creating only some part of RPL (NPC,HWC,Simlock) - Cyclone is now backing up missing part:

- Added SUPER DONGLE KEY extracting (this Original Nokia one, so after writing it back phone still can be authorized with original SX4 card)

- Added CMLA KEY DATA extracting

- That means created RPL File by Cyclone is now 100% SAME AS NOKIA'S ONE!

- WORLD'S UNIQUE : Added BB5 MCU & DSP Timestamps Reader / Diagnostic Tool. This will help diagnostic of downgraded phone, will read Security Block, decode timestamps of current installed SW (and factory one, or Dejan Hack if exists) with FLASH installed MCU/DSP timestamps. Will have ability to FULL REBUILD downgrade security zone (dead06) soon.

- WORLD'S UNIQUE : BB5 Security Block Analyzer added, this will read Security Block and analyze it's health for content of following Security Data: SIMLOCK DATA, SUPERDONGLE KEY DATA, ECC KEYS DATA, DIV DATA, CMLA (DRM) DATA. Also it reads ST_SIMLOCK_TEST and ST_SECURITY_TEST and when problems occur, recommends actions.

- WORLD'S UNIQUE : Standalone BB5 Calculator Added. This calculated BB5 NCK (levels 1-7) for unlocking purposes. Calculated codes works only with phones which have been relocked with Cyclone Box. To calculate code is needed only IMEI - no need cable, phone, flashbus logger, etc.

- WORLD'S UNIQUE : BB5 Unlock by NCk/RPL, SD Recalc, SX4 auth using USB !! (once log file readen)

- Upon box upgrade (maintenance) Bootloader in box is syncronized with server to avoid Activation Problems

- Bootagent server upgraded to 1.01, fixed "Box is not activated, ID 09)

- Fixed "Access Violation" when Cyclone Box SW is already launched and connection to box opened

- After BB5 Relock, unlock codes is displayed

- More detailed messages is now shown upon new NCK or RPL calculation

- BB5 Security Code Reading is moved to "UserArea" tab (needed space for MCU/DSP timestamp reading and security block analyzing)

- Total unlock/relock time added after operation is finished (thx to arash)

- Box Firmware version is now checked upon loading of Nokia Module - if box firmware is obsolete, SW asks for upgrade and doing it automaticly

- Selected unlock method is now displayed before RootkeyHash support check

- Upon first reading of NCK Code (Extracting) or RPL Calculation, "CYC" log file is stored in "StoredFiles" and next time upon BB5 Security Actions (Calculation of SD, Extracting NCK, Calculating RPL (Relocking)) phone is no booted anymore and whole process took only 1 second!! Keep in mind calculated CYC file is paired with Box Serial number, so in case if your box serial number is changed-go to stored files and purge all "cyc" files.

- Decrypted AES Subblock of Security Block is now checksum checked (16 bytes checksum at end of block)

- Fixed "This is invalid integer..." when parsing phone with damaged IMEI

- When another copy of Cyclone Software is running, message is displayed instead of errors

- New method of NCK Calculation is now default BB5 unlocking method

- When New Method of NCK calculation is selected, PA_SL is not determined already (saves lots of time)

- Skin Manager updated to v6.54 (more stability)

- When BB5 RPL Don't contain Certificates (NPC,HWC) phone isn't booted

- Fixed bug when Flash RPL BB5 Data is being written two times

- Added more verbose debug messages when preparing Boot BB5 Phone

- Garbage characters when dealing with SLPA phones (#pw+___garbage___+1) bug fixed

- New splash screen added, thx to arash, again

- When Cyclone fails to boot APE subsystem, it shows hint about TX2

- APE subsystem is now no longer booted upon CheckFlashingBus

- Changed "Failed to write CMT Cert Data (3)" message, added TX2 information

- BB5 TX2 Line test added after "CheckFlashingBus"

- Before RPL Write, Software testing TX2 Line and when its faulty (not adapter) it showing apporiate message

- Writing BB5 CMT HWC Certificate from RPL fixed (thx to arash)

- Parsing some Simlock Arrays (5130) produced

Just download EXE file and replace at C:\Program files\Cyclone Box\

Make sure Installer is installed aswell (this one from january, else you will have message RootkeyHash not supported).

You don't need any activations,logs to use this update.

Notes:

SX4 Emulation works offline and emulates SX4 card 1:1, in case of failure still server will be used.

BB5 NCK Calculator works for phone relocked by Cyclone Only (unlocking using IMEI only, no need know other data, just imei - no need cable or connection to box too).

BB5 USB Unlocking and other security tools works only if phone log (by flashbus) is readen before.

Update is fast and most of security functions (sd,rpl) works very fast.

Don't forget to upgrade your Box Firmware to v01.21.

[DOWNLOAD]http://www.heitorluis.clangsm.net/Cyclone/Cyclone.exe[/DOWNLOAD]

More coming.

Best Regards,

Cyclone Team

Hello,

you can download latest beta from here:

(please use it only for test DCT4 RSA purposes, full stable installer will be released tonight hopefully.).

Don't forget to upgrade box firmware!

Post unlocked phones here.

Best Regards

Cyclone Team

Alguem ja testou ???

Alguem ja testou ???

Tópico somente de atualização, vamos manter a organização do fórum, PESQUISE que vc vai ver que já tem tópico sobre isso.

Cyclone Box Firmware v01.36 Released

- Fixed smartcard issues in some enivronments (Smartcard is not responding for reset)

- Fixed issues when some phones couldn't calculate NCK Codes with new method (Security Section Checksum Error)

- Minor changes and bugfixes

!! CYCLONE - STOP ME IF YOU CAN !!

Atenção: Hoje saiu o Instaler versão 1.05 que esta com vários bugs, não instalem. Dentro de momentos irá sair a versão 1.06.

Cyclone Box Installer v1.06 Released (2010-04-23)

Some important bugs fixed related to DCT4 RSA Unlock.

Hello, New update for Cyclone Box is Ready.

What is new?

- Blackberry Module added, support all latest 210 MEPs. Unlock is free, and uses server to calculate Unlock Codes.

- If Logger fails somehow, you might still use manual mode (if you know IMEI and MEP)

- All DCT4 RPLs are free now (Included ASICs: 2,5,6,7,11)

- Skin changed back to white one (too many users complained)

- Improved mode transition between Main/Boot (timeout increased)

- Fixed problem when upon adding "New Path" in "Paths" module Root directory was empty

- CBUS stack improved, if box is disconeected during work, it tries to connect it again instead of "CBUS ERROR"

- Minor changes and bugfixes

How it works?

1. Run Blackberry Module

2. Install drivers (skip this if done already)

3. Click "Read Phone"

4. Connect phone to computer

5. Unlock using calculated codes

Here is example BB8310 Unlocked by Cyclone:

Citar

Waiting for new Blackberry USB Device (timeout 30 seconds)...

New device attached, checking if it's Blackberry...

Blackberry Found!

PIN: 208B60F9

Opened Channel "RIM CalTask", Proceeding...

IMEI: 358516020462712

HWV-16835-001-1

ASY-15714-005

MEP-06424-002

VSM-17713-001

CFG-10695-065

SFI-15771-033

APP-21301-001

Calculating Codes using Fetched Data...

Handling device: [Cyclone Team], [Cyclone Box]

Service Tag: 6F1079DB8ADD083018BB1FB147B8DEE6

Cyclone Server (1.0.0.598), Cyclone Box Team 2008, 2009, 2010 - Ready.

Please wait...

Codes received: 1

MEP-2 Code: 4910403860764705

All Done!

Cyclone Atualização ( Blackberry )

Atualização para Cyclone Box O que há de novo? - Módulo Blackberry acrescentou, suportar os mais recentes os 210 deputados. Desbloqueio é gratuito, e utilizado pelo servidor para calcular Unlock Codes. - Se Logger falha de algum modo, você ainda pode usar o modo manual (se você sabe o xxxxxxxx e MEP) - Todos os RPLs DCT4 está livre agora (Incluído ASICs: 2,5,6,7,11) - Pele alterado novamente para um branco (muitos usuários reclamaram) - A transição entre o principal modo de Melhoria / Boot (timeout aumentada) - Corrigido o problema quando a adição de Caminho Novo, em Caminhos diretório raiz do módulo estava vazio - Cbus pilha melhorado, se a caixa é disconeected durante o trabalho, ele tenta se conectar novamente ao invés de Cbus ERROR - Pequenas mudanças e correções

Cyclone Box Firmware v01.38 Released

v01.38 Nokia Firmware is uploaded to server

Changes:

- Fixed problem when Nokia correct BB5 NCKs was calculated only for levels +1,+2,+3, codes +4,+5,+6,+7 was wrongly calculated due to memory leak of calculation routines.

- Minor (or non enveloped yet ) changes and bugfixes

This is server-side update only, don't ask for "exe" file because new "exe" is not released at moment, just use Maintenance Tool and upgrade your box.

Every box have 3 tries of upgrading firmware, please be patient during upgrade process because it may take some time and if you will cancel it (When software will act as a "hangup") you will lose upgrade logs and will need ask us for adding another credits...

Best Regards,

Cyclone Team

Cyclone EVOLUTION ! Added FREE Clip Mode, Added FREE Infineon XGold Flashing & More.. Hi to all

New Cyclone Box Installer, Firmware, Bootloader, is ready!

Most important changes:

=====================

Installer v1.07

30.06.2010

=====================

- New FBUS Loaders v10.18.00 introduced (new protocol, for RAPIDO,RAPU,ST,etc)

- New FBUS Lodaers v10.16.00 introduced (old protocol, for RAPv3)

- Added support for Infineon X-Gold phones flashing. Phones supported: 1661 RH-111, RH-125, etc.

- XGold: Support for dead phones flashing

- XGold: Support for cross flash (we have tested 1616 flashing with 1800 firmware and seems works. Anyway YOU are responsible for any damages. Make sure PM is being backed-up before cross-flash. You also can't flash phones with difrent platform (i.e. RH111 <> RH125). Too diffrent CPU, LCD...,etc...)

- XGold: Supports bauds 115200,230400,460800,921600

- XGold: You don't need to know which phone is UPP or Infineon based. Just select model and Cyclone will detect it automaticly - wil select corect falshing method.

- XGold: Supports for changing phone PPM/CNT or/and MCU

- XGold: Support for latest 2010 PBL/EBL Loaders

- Added "Flash Language Only" checkbox for DCT4/XGold mobiles. Use only if MCU version installed in phone matches PPM/CNT version which going to be flashed.

- Cyclone Clip Diagnostic module added. This is used for testing additional Cyclone Hardware (Clip).

- Clip Module Added into Main Firmware. This is used only with "Cyclone Clip" hardware. Clip Features:

- Clip: Can unlock any DCT4+ phone within 2 secs (without PC)

- Clip: Can repair Contact Service (if caused by damaged simlock)

- Clip: Can Rebuild Simlock Area

- Clip: Can reset security code of most DCT4/BB5 phones

- Clip: Can reset security code bad attempts counter of most DCT4/BB5 phones

- Clip: 100% Safe, fast and easy to use

- You need have Clip Hardware to use Clip Funcionality. Clip is very simple hardware attached together with batery to Diagnostic Port (and box could be used as clip without PC). We will update clip later for other funcionality.

- New Secure Bootloader Agent v3.00 Released

- Added Dead Boot Recovery mode (in case to do "Boot Recovery" (just in case) smartcard MUST be removed to launch Recovery Mode!)

- New Secure Bootloader v2.12 have been released

- Bootloader: Added Clip Detection

- Bootloader: Fixed floating (blinking) "VBAT" port

- Bootloader: Added support for some new types of smartcard

- Bootloader: Improved startup time

- Bootloader: Improved security

- Bootloader: Minor changes and bugfixes

- Added new messages to NCK Phone Respond parsing (added "Too fast between tries" and "Not locked on given locklevel")

- The +4/5/6/7 BB5 NCK passwords are now calculated correctly (memory leak during code calculation)

- Message "This will consume XX credits" removed while taking DCT4 RPL as long as they are free .

- Blackberry IMEI Check fixed

- Added "Skip CMT ID Check" for some BB5 phones (if you are trying to flash alien files or NMP made some mistake during building FIASCO images)

- Added Warning confirmation before Writing Alien SD Keys

- Error while RSA unlocking DCT4 phones fixed (Error 0x02). Error have occured when used bad cable.

- Main Firmware v01.41 Released

- Box HW Rev A11E Added

- Minor changes and bugfixes

How to run "Clip Mode"?

1. Attach Clip Adapter to box "Diagnostic Port"

2. Connect Clip Adapter "USB" cable to box USB Input

3. Connect 9V battery to Clip Adapter

4. Connect phone to "Service Port"

How to use "Clip Mode"?

Once Clip Mode is run, you need use S1 Button to change it's mode.

Default clip mode is:

RED (slowly blinking) - read phone info via FBUS

other modes you can select pressing S1 button:

GREEN - Unlock/Repair simlock

BLUE - reset securitycode/sec.code attempts

Once correct mode is assigned, you need push S2 button. Needed action will be taken, and GREEEN (success) or RED(failed) led will blink fast afterall. Clip will be ready to service next phone/select other mode/etc.

Maybe some movie, how to use it?

Youtube:

Where to get clip hardware?

You can ask any of Cyclone Box distributor/reseller.

Hardware is relative cheap - 15 usd (end-user price).

We will update clip soon with other functions.

It's first official Cyclone Addon.

Keep note it is CYCLONE ADDON, and same Clip Adaptor - it's just adaptor and still Cyclone Box is needed to work!

Where from download?

RapidShare: 1-CLICK Web hosting - Easy Filehosting

Please don't forget to upgrade box using new EXE file. New firmware v01.41 is needed to run latest Application.

Best Regards,

Stay Tuned,

Cyclone Team