Motorola X4 Android 8 frp successfully !

 

Port    : Fastboot Inteface
Baud Rate    : Not Applicable
Device    : Motorola
Operation    : New FRP Reset
Searching for Device in FastBoot Mode... OK
Reading Phone Information...
Model    : XT1900-6
Boot Ver.    : MBM-3.0-uefi-641a15b-171216
Baseband    : M660_7036.16.01.69R PAYTON_LATAMDSDS_CUST
Software    : Blur_Version.27.31.52.payton.retail.en.US
IMEI    : 359552080712711
CPU    : SDM630 1.0 (6)
RAM    : 3GB SAMSUNG LP4x DIE=12Gb M5=01 M6=06 M7=00 M8=0E
EMMC    : 32GB SAMSUNG DD68MB RV=08 PV=02 FV=0000000000000002
Setting Factory Mode... OK
Searching Network Interface... Found
Connecting to device... OK
Model    : moto x4
Bootloader    : MBM-3.0-uefi-641a15b-171216
Baseband    : M660_7036.16.01.69R PAYTON_LATAMDSDS_CUST
Build    : Blur_Version.27.31.52.payton.retail.en.US
Android    : 8.0.0
Searching Network Interface... Found
Connecting to device... OK
Model    : moto x4
Bootloader    : MBM-3.0-uefi-641a15b-171216
Baseband    : M660_7036.16.01.69R PAYTON_LATAMDSDS_CUST
Build    : Blur_Version.27.31.52.payton.retail.en.US
Android    : 8.0.0
Operation Finished.
Elapsed Time: 05:40
[Module Ver. 4.8]

 

Port    : ADB Interface
Baud Rate    : Not Applicable
Device    : Motorola
Operation    : Reset FRP
Searching for Device... Found
Model    : moto x4
Version    : 8.0.0
Hardware    : qcom
Baseband    : M660_7036.16.01.69R PAYTON_LATAMDSDS_CUST
SIM Card    : ABSENT,ABSENT
CPU    : arm64-v8a
Type    : Unknown
MEID(1)    : Null/Empty
Root    : Not Rooted
Resetting FRP Lock... Done
Operation Finished.
Elapsed Time: 00:07
[Module Ver. 4.8]

xiaomi 5s flash em 5 partes !
rawprogram0
rawprogram1
rawprogram2
rawprogram3
rawprogram4
rawprogram5

 

Operation    : Flash
Checking for existing devices...Found
Port    : COM32
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID    : E1108100 [8x26] 00000000
OPK_DATA    : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Firehose Loader...Done
Sending Loader [8x26.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware*    : 8x10, eMMC, 2 GB
Warning! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 49152, Sector Size: 512
Writing [PrimaryGPT_0.bin] -> [PrimaryGPT] ...Done
Writing [modem_8192.bin] -> [modem] ...Done
Writing [sbl1_139264.bin] -> [sbl1] ...Done
Writing [rpm_141312.bin] -> [rpm] ...Done
Writing [tz_142336.bin] -> [tz] ...Done
Writing [sdi_143360.bin] -> [sdi] ...Done
Writing [aboot_144384.bin] -> [aboot] ...Done
Writing [rpmb_148480.bin] -> [rpmb] ...Done
Writing [tzb_149504.bin] -> [tzb] ...Done
Writing [abootb_150528.bin] -> [abootb] ...Done
Writing [persist_204800.bin] -> [persist] ...Done
Writing [laf_270336.bin] -> [laf] ...Done
Writing [boot_319488.bin] -> [boot] ...Done
Writing [recovery_364544.bin] -> [recovery] ...Done
Writing [rct_435200.bin] -> [rct] ...Done
Writing [factory_475136.bin] -> [factory] ...Done
Writing [sbl1b_581632.bin] -> [sbl1b] ...Done
Writing [cust_655360.bin] -> [cust] ...Done
Writing [BackupGPT_7633920.bin] -> [BackupGPT] ...Done
Resetting device...Failed
Remove cable, reconnect battery / hold Power Button ~15 seconds.
Operation Finished.

 

FRP ASUS ZB551KL feito por modo EDL 

  Citar

Operation    : Reset FRP

Checking for existing devices...Found
Port    : COM312
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID    : E1809100 [8x10] 00000000
OPK_DATA    : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [4]
No compatible loader found. Device may not boot with this loader.
Preparing Firehose Loader...Done
Sending Loader [8x10.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware*    : 8x26, eMMC, 16 GB
Warning! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 49152, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device    : asus [msm8226]
Software    : LMY47V.WW_Phone-13.0209.1702.114-20170314, WW_Phone-13.0209.1702.114-20170314 [Tue Mar 14 09:54:04 CST 2017]
Android Ver.    : 5.1.1
Resetting FRP Lock.....Done
Operation Finished.
Module Ver. 1.6

Editado Fevereiro 3, 2018 7 anos por Paulo Pessoa

FRP DONE  MOTO E 4 PLUS Menos De 5 Segundos 

ULTIMATE MTK 

XT 1733

Desliga o celular e aperta tecla power  

done    !!!!!!!!!!!!

Editado Fevereiro 6, 2018 7 anos por Reginaldo almeida

Reset conta MI MIX 

 

Operation    : Reset Mi Account
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM77)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID    : E1F00500 [8996] 00000000
OPK_DATA    : 65D680382C4E0091ED2A1DDCD7EFD99ED328BEBDAD748E5CE177EC5AB6544AE5
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Firehose Loader...Done
Sending Loader [8996_004.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : MSM8996, UFS, Unknown
Warning! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 131072, Sector Size: 4096
Reading Partition Table...OK
Reading Device Information...OK
Device    : Xiaomi MIX [msm8996]
Software    : NRD90M, V9.1.1.0.NAHMIEI [Mon Nov  6 22:31:48 CST 2017]
Android Ver.    : 7.0
Resetting Mi Account Data...Done
Preparing Data...Done
 

Reset FRP zd553kl 

 

Operation    : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM77)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID    : E1F00400 [8937] 39A21620
OPK_DATA    : FDB379775FEB07C551EFBC01F78CD6ABAC99A2829E6F63768E4491B32485B6E5
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Firehose Loader...Done
Sending Loader [8937_015.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware*    : 8937, eMMC, 64 GB
Warning! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device    : asus ASUS_X00LDA [msm8937]
Software    : NMF26F.WW_Phone-14.0400.1801.186-20171229, WW_Phone-14.0400.1801.186-20171229 [Fri Dec 29 18:16:44 CST 2017]
Android Ver.    : 7.1.1
Resetting FRP Lock......Done
Operation Finished.
Module Ver. 1.7

Reset conta Mi redmi note 4

 

Operation    : Reset Mi Account
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM77)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...Ignored
Init Handshake Sequence...OK
Hardware ID    : E1600400 [8953] 00000000
OPK_DATA    : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Firehose Loader...Done
Sending Loader [8953.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware*    : 8953, eMMC, 32 GB
Warning! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device    : Xiaomi Redmi Note 4 [msm8953]
Software    : AL1512-mido-build-20180112234639, V9.2.1.0.NCFMIEK [Fri Jan 12 23:46:37 WIB 2018]
Android Ver.    : 7.0
Resetting Mi Account Data...Done
Preparing Data...Done
Formatting Userdata...Done
When phone is completely ON, connect to Internet and add Mi Account.
Operation Finished.
Module Ver. 1.7

Editado Fevereiro 10, 2018 7 anos por William Ferreira

flash lenovo k5

frp moto c plus

  ASUS  ZenFone 3 (ZE520KL)  FRP com Sucesso com a  UMT box!!!

Reset frp J710MN 7.0

 

Feito downgrade para versão 6.0.1 usando apenas os arquivos recovery e system,após escrevi eng boot disponível no clansoft que ativou o adb. 

 

PS: na octopus dava que tinha tirado mas aparelho ligava com a conta ainda,na umt foi de primeira. 

 

Device: 
Operation: Reset FRP
Searching for Device... Found
Model: SM-J710MN
Baseband: J710MNUBU4BRA1
Bootloader: J710MNVJU4BRB2
PDA: J710MNVJU3AQD3
Android Version: 6.0.1
Resetting FRP Lock... Done
---------------- IMPORTANT ----------------
Accept Agreement on phone to enter Home Screen.
Goto Menu > Settings > Backup and Reset > Factory data reset.
Operation Finished.
Elapsed Time: 00:11
[Ultimate Samsung Flasher v1.3]

Motorola Moto X Play XT1563  7.1.1 de 1  de setembro  de 2017  FRP com Sucesso com a  UMT box!!!

Reset conta Mi Redmi Note 3

 

Operation    : Reset Mi Account
Checking for existing devices...Found
Port    : COM77
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID    : E1009B00 [8976] 00000000
OPK_DATA    : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Firehose Loader...Done
Sending Loader [8976_001.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware*    : 8976, eMMC, 32 GB
Warning! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device    : Xiaomi Redmi Note 3 [msm8952]
Software    : MMB29M, V9.2.4.0.MHOMIEK [Mon Jan 15 23:12:46 CST 2018]
Android Ver.    : 6.0.1
Resetting Mi Account Data...Done
Preparing Data...Done
Formatting Userdata...Done
When phone is completely ON, connect to Internet and add Mi Account.
Operation Finished.

ZE553kl FRP

 

Port    : Fastboot Interface
Baud Rate    : Not Applicable
Device    : ASUS X00LD
Operation    : FRP Reset
Searching for Device in FastBoot Mode... OK
Reading Information... OK
FastBoot Ver.    : 0.5
Product    : MSM8953
Warranty    : Yes
Bootloader    : Locked
Enabling ADB... OK
Searching for Device... Found
Model    : ZE553KL
Version    : 7.1.1
Hardware    : qcom
Baseband    : M3.10.47.15-Hades_080001
CPU    : arm64-v8a
SIM Card    : ABSENT,ABSENT
Type    : Unknown
MEID(1)    : Null/Empty
Resetting FRP Lock... OK
Now Goto Menu > Settings > Backup and Reset > Factory data reset.
Operation Finished.
Elapsed Time: 00:50
[Module Ver. 4.8]
Log Saved to Logs\180227_205906.log

Editado Fevereiro 28, 2018 7 anos por Cristiano de Moraes

flash lenovo K53B36 com Sucesso com a  UMT box!!!

 

Operation    : Flash
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM53)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 5.1.1.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID    : E1F00400 [8937] 00000000
OPK_DATA    : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [3]
Device may possibly not boot with this loader.
Preparing Firehose Loader...Done
Sending Loader [8937.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware*    : 8937, eMMC, 32 GB
Warning! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 1048576, Sector Size: 512
Writing [NON-HLOS.bin] -> [modem] ...Done
Writing [cmnlib.mbn] -> [cmnlib] ...Done
Writing [cmnlib.mbn] -> [cmnlibbak] ...Done
Writing [cmnlib64.mbn] -> [cmnlib64] ...Done
Writing [cmnlib64.mbn] -> [cmnlib64bak] ...Done
Writing [keymaster.mbn] -> [keymaster] ...Done
Writing [keymaster.mbn] -> [keymasterbak] ...Done
Writing [emmc_appsboot.mbn] -> [aboot] ...Done
Writing [emmc_appsboot.mbn] -> [abootbak] ...Done
Writing [sbl1.mbn] -> [sbl1] ...Done
Writing [sbl1.mbn] -> [sbl1bak] ...Done
Writing [rpm.mbn] -> [rpm] ...Done
Writing [rpm.mbn] -> [rpmbak] ...Done
Writing [tz.mbn] -> [tz] ...Done
Writing [tz.mbn] -> [tzbak] ...Done
Writing [devcfg.mbn] -> [devcfg] ...Done
Writing [devcfg.mbn] -> [devcfgbak] ...Done
Writing [adspso.bin] -> [dsp] ...Done
Writing [ddr.bin] -> [DDR] ...Done
Writing [boot.img] -> [boot] ...Done
Writing [recovery.img] -> [recovery] ...Done
Writing [splash.img] -> [splash] ...Done
Writing [mdtp.img] -> [mdtp] ...Done
Writing [cache_1.img] -> [cache] ...Done
Writing [cache_2.img] -> [cache] ...Done
Writing [cache_3.img] -> [cache] ...Done
Writing [system_1.img] -> [system] ...Done
Writing [system_2.img] -> [system] ...Done
Writing [system_3.img] -> [system] ...Done
Writing [system_4.img] -> [system] ...Done
Writing [system_5.img] -> [system] ...Done
Writing [system_6.img] -> [system] ...Done
Writing [system_7.img] -> [system] ...Done
Writing [system_8.img] -> [system] ...Done
Writing [system_9.img] -> [system] ...Done
Writing [system_10.img] -> [system] ...Done
Writing [system_11.img] -> [system] ...Done
Writing [system_12.img] -> [system] ...Done
Writing [system_13.img] -> [system] ...Done
Writing [system_14.img] -> [system] ...Done
Writing [system_15.img] -> [system] ...Done
Writing [system_16.img] -> [system] ...Done
Writing [system_17.img] -> [system] ...Done
Writing [system_18.img] -> [system] ...Done
Writing [system_19.img] -> [system] ...Done
Writing [system_20.img] -> [system] ...Done
Writing [system_21.img] -> [system] ...Done
Writing [system_22.img] -> [system] ...Done
Writing [system_23.img] -> [system] ...Done
Writing [system_24.img] -> [system] ...Done
Writing [system_25.img] -> [system] ...Done
Writing [system_26.img] -> [system] ...Done
Writing [system_27.img] -> [system] ...Done
Writing [system_28.img] -> [system] ...Done
Writing [system_29.img] -> [system] ...Done
Writing [system_30.img] -> [system] ...Done
Writing [system_31.img] -> [system] ...Done
Writing [system_32.img] -> [system] ...Done
Writing [system_33.img] -> [system] ...Done
Writing [system_34.img] -> [system] ...Done
Writing [system_35.img] -> [system] ...Done
Writing [system_36.img] -> [system] ...Done
Writing [system_37.img] -> [system] ...Done
Writing [system_38.img] -> [system] ...Done
Writing [system_39.img] -> [system] ...Done
Writing [system_40.img] -> [system] ...Done
Writing [system_41.img] -> [system] ...Done
Writing [system_42.img] -> [system] ...Done
Writing [system_43.img] -> [system] ...Done
Writing [system_44.img] -> [system] ...Done
Writing [system_45.img] -> [system] ...Done
Writing [system_46.img] -> [system] ...Done
Writing [system_47.img] -> [system] ...Done
Writing [system_48.img] -> [system] ...Done
Writing [preload_1.img] -> [preload] ...Done
Writing [preload_2.img] -> [preload] ...Done
Writing [preload_3.img] -> [preload] ...Done
Writing [preload_4.img] -> [preload] ...Done
Writing [preload_5.img] -> [preload] ...Done
Writing [preload_6.img] -> [preload] ...Done
Writing [preload_7.img] -> [preload] ...Done
Writing [userdata_1.img] -> [userdata] ...Done
Writing [userdata_2.img] -> [userdata] ...Done
Writing [userdata_3.img] -> [userdata] ...Done
Writing [userdata_4.img] -> [userdata] ...Done
Writing [userdata_5.img] -> [userdata] ...Done
Writing [userdata_6.img] -> [userdata] ...Done
Writing [userdata_7.img] -> [userdata] ...Done
Writing [userdata_8.img] -> [userdata] ...Done
Writing [userdata_9.img] -> [userdata] ...Done
Writing [userdata_10.img] -> [userdata] ...Done
Writing [userdata_11.img] -> [userdata] ...Done
Writing [userdata_12.img] -> [userdata] ...Done
Writing [userdata_13.img] -> [userdata] ...Done
Writing [userdata_14.img] -> [userdata] ...Done
Writing [userdata_15.img] -> [userdata] ...Done
Writing [userdata_16.img] -> [userdata] ...Done
Writing [userdata_17.img] -> [userdata] ...Done
Writing [userdata_18.img] -> [userdata] ...Done
Writing [userdata_19.img] -> [userdata] ...Done
Writing [userdata_20.img] -> [userdata] ...Done
Writing [userdata_21.img] -> [userdata] ...Done
Writing [gpt_main0.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup0.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Resetting device...Done
Operation Finished.
Module Ver. 1.7

Motorola Moto G5s  XT1792   7.1.1 de 1  de Dezembro  de 2017  FRP com Sucesso com a  UMT box!!!

 

Port    : Fastboot Inteface
Baud Rate    : Not Applicable
Device    : Motorola
Operation    : New FRP Reset
Searching for Device in FastBoot Mode... OK
Reading Phone Information...
Model    : XT1792
Boot Ver.    : moto-msm8937-BC.06
Baseband    : M8937_34.10.03.48R MONTANA_BRAZILDSDS_CUST
Software    : Blur_Version.26.241.2.montana.retail.en.US
IMEI    : 351889094677730
CPU    : MSM8937
RAM    : 2GB SKHYNIX LP3 DIE=8Gb M5=06 M6=03 M7=00 M8=1F
EMMC    : 32GB SKHYNIX HBG4a2 RV=08 PV=A5 FV=00000000000000A5
Setting Factory Mode... OK
Searching Network Interface... Found
Connecting to device... OK
Model    : Moto G (5S)
Bootloader    : 0xBC06
Baseband    : M8937_34.10.03.48R MONTANA_BRAZILDSDS_CUST
Build    : Blur_Version.26.241.2.montana.retail.en.US
Android    : 7.1.1
Searching Network Interface... Found
Connecting to device... OK
Model    : Moto G (5S)
Bootloader    : 0xBC06
Baseband    : M8937_34.10.03.48R MONTANA_BRAZILDSDS_CUST
Build    : Blur_Version.26.241.2.montana.retail.en.US
Android    : 7.1.1
Resetting FRP... OK
Searching for Device in FastBoot Mode... OK
Removing Factory Mode... OK
Operation Finished.
Elapsed Time: 06:35
[Module Ver. 4.8]
Log Saved to Logs\180310_144657.log

reparo de BASEBAND no xt1640 G4 Plus sem wi-fi , imei , bluetooth ( baseband corrompida,              com a umt box!!!

Utilizando esta rom
Moto G4 Plus XT1640 XT1641 XT1643 XT1644 XT1626 XT1621 XT1622 e todos os G4 ATHENE_NPJS25.93-14-15_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml

 

Port    : Fastboot Interface
Baud Rate    : Not Applicable
Device    : Motorola QC
Operation    : Flash
Fw Model    : athene
Fw Version    : athene-user 7.0 NPJS25.93-14-15 5 release-keysM8952_70030.25.03.62.02R
Searching for Device in FastBoot Mode... OK
Reading Phone Information...
Model    : XT1640
Boot Ver.    : moto-msm8952-B1.06
Baseband    : <not found>
Software    : Blur_Version.25.11.16.athene.retail.en.US
IMEI    : 351881086849997
CPU    : MSM8952
RAM    : 2GB SAMSUNG LP3 DIE=8Gb M5=01 M6=05 M7=00 M8=1F
EMMC    : 32GB SAMSUNG QX13MB RV=08 PV=07 FV=0000000000000007
Sending Data [partition]... Done
Sending Data [bootloader]... Done
Sending Data [logo]... Done
Sending Data [boot]... Done
Sending Data [recovery]... Done
Sending Data [dsp]... Done
Sending Data [oem]... Done
Sending Data [system]... Done
Sending Data [system]... Done
Sending Data [system]... Done
Sending Data [system]... Done
Sending Data [system]... Done
Sending Data [system]... Done
Sending Data [system]... Done
Sending Data [system]... Done
Sending Data [modem]... Done
Erasing [modemst1]... Done
Erasing [modemst2]... Done
Sending Data [fsg]... Done
Erasing [cache]... Done
Erasing [userdata]... Done
Erasing [customize]... Done
Erasing [clogo]... Done
Erasing [DDR]... Done
Operation Finished.
Elapsed Time: 02:31
[Module Ver. 4.8]
Log Saved to Logs\180312_162058.log
Checking File... Done
XML File    : flashfile.xml
Parsing XML File... Done
Model    : athene
Version    : athene-user 7.0 NPJ25.93-14 16 release-keysM8952_70030.25.03.62R

Moto G4 Play XT1603  com a Versão do Android    : 7.1.1 de 1 de Janeiro de 2018 FRP com Sucesso com a  UMT box!!!

 

Port    : Fastboot Inteface
Baud Rate    : Not Applicable
Device    : Motorola
Operation    : New FRP Reset
Searching for Device in FastBoot Mode... OK
Reading Phone Information...
Model    : XT1603
Boot Ver.    : moto-msm8916-81.12
Baseband    : M8916_20250112.18.05.45.01R HARPIA_BRAZIL_DSDS_CUST
Software    : Blur_Version.26.201.7.harpia.retail.en.US
IMEI    : 355673080751733
CPU    : MSM8916
RAM    : 2GB Samsung S8 SDRAM DIE=8Gb
EMMC    : 16GB Samsung REV=08 PRV=07 TYPE=57
Setting Factory Mode... OK
Searching Network Interface... Found
Connecting to device... OK
Model    : Moto G Play
Bootloader    : 0x8112
Baseband    : M8916_20250112.18.05.45.01R HARPIA_BRAZIL_DSDS_CUST
Build    : Blur_Version.26.201.7.harpia.retail.en.US
Android    : 7.1.1
Searching Network Interface... Found
Connecting to device... OK
Model    : Moto G Play
Bootloader    : 0x8112
Baseband    : M8916_20250112.18.05.45.01R HARPIA_BRAZIL_DSDS_CUST
Build    : Blur_Version.26.201.7.harpia.retail.en.US
Android    : 7.1.1
Resetting FRP... OK
Searching for Device in FastBoot Mode... OK
Removing Factory Mode... OK
Operation Finished.
Elapsed Time: 04:54
[Module Ver. 4.8]
Log Saved to Logs\180316_150204.log

reset frp yezz 400e 
aparelho em fastboot 

 

 

FRP DONE G930F S7 VIA CABO UART 

  R 523K 

UMT BOX 

FRP MOTOX 4 Andróid 8.0 com Sucesso

 

 

Port    : Fastboot Inteface
Baud Rate    : Not Applicable
Device    : Motorola
Operation    : New FRP Reset
Searching for Device in FastBoot Mode... OK
Reading Phone Information...
Model    : XT1900-6
Boot Ver.    : MBM-3.0-uefi-641a15b-180131
Baseband    : M660_7020.05.01.52.01R PAYTON_LATAMDSDS_CUST
Software    : Blur_Version.27.241.9.payton.retail.en.US
IMEI    : 359552085403050
CPU    : SDM630 1.0 (6)
RAM    : 3GB MICRON LP4 DIE=12Gb M5=FF M6=02 M7=10 M8=0C
EMMC    : 32GB MICRON S0J97Y RV=08 PV=10 FV=575330304D483333
Setting Factory Mode... OK
Searching Network Interface... Found
Connecting to device... OK
Model    : moto x4
Bootloader    : MBM-3.0-uefi-641a15b-180131
Baseband    : M660_7020.05.01.52.01R PAYTON_LATAMDSDS_CUST
Build    : Blur_Version.27.241.9.payton.retail.en.US
Android    : 8.0.0
Searching Network Interface... Found
Connecting to device... OK
Model    : moto x4
Bootloader    : MBM-3.0-uefi-641a15b-180131
Baseband    : M660_7020.05.01.52.01R PAYTON_LATAMDSDS_CUST
Build    : Blur_Version.27.241.9.payton.retail.en.US
Android    : 8.0.0
Resetting FRP... OK
Searching for Device in FastBoot Mode... OK
Removing Factory Mode... OK
Operation Finished.
Elapsed Time: 02:50
[Module Ver. 4.8]
Log Saved to Logs\180412_161929.log

Reset Conta Mi Redmi 3S 

 

Operation    : Reset Mi Account
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM77)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID    : E1F00400 [8937] 00000000
OPK_DATA    : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Firehose Loader...Done
Sending Loader [8937.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : 8937, eMMC, 32 GB
LU Count    : 1 [0x03A3E000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device    : Xiaomi Redmi 3S [msm8937]
Software    : MMB29M, V8.5.4.0.MALMIED [Wed Sep 13 11:27:21 WIB 2017]
Android Ver.    : 6.0.1
Patch Level    : 2017-04-01
Resetting Mi Account Data...Done
When phone is completely ON, connect to Internet and add Mi Account.
Operation Finished.
 

Reset Frp Zenfone 4 Max X00ID

 

Operation    : Reset FRP
Checking for existing devices...Found
Port    : Qualcomm HS-USB QDLoader 9008 (COM77)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID    : E1600500 [8917] 00000000
OPK_DATA    : 195B400B367642F4CF4C418D86A4E5DF32466A4DD10562790AEF7CEE900E2B8E
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Firehose Loader...Done
Sending Loader [8917_007.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : 8917, eMMC, 16 GB
LU Count    : 1 [0x01D1F000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device    : asus ASUS_X00ID [msm8937]
Software    : NMF26F.WW_Phone-14.2016.1803.232-20180301, WW_Phone-14.2016.1803.232-20180301 [Thu Mar  1 23:50:00 CST 2018]
Android Ver.    : 7.1.1
Patch Level    : 2018-03-01
Resetting FRP Lock......Done
Operation Finished.
Module Ver. 2.0

Remoção conta "frp" Xiaomi Redmi Note 4

 

Device    : Xiaomi Redmi Note 4
Operation    : Reset FRP
Checking for existing devices...Found
Port    : Qualcomm HS-USB QDLoader 9008 (COM32)
Driver Info    : Lenovo Inc., leusbser.sys, 2.0.9.6
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID    : E1600400 [8953] 00000000
OPK_DATA    : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Firehose Loader...Done
Sending Loader [8953.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : 8953, eMMC, 32 GB
LU Count    : 1 [0x03A3E000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device    : Xiaomi Redmi Note 4 [msm8953]
Software    : AL1512-mido-build-20180309002948, V9.5.4.0.NCFMIFA [Fri Mar  9 00:29:46 WIB 2018]
Android Ver.    : 7.0
Patch Level    : 2018-02-01
Resetting FRP Lock......Done
Operation Finished.
Module Ver. 2.1

Remoção conta FRP ASUS ZE552KL Android 8 .

 

Device    : ASUS ZE552KL
Operation    : Reset FRP
Checking for existing devices...Found
Port    : Qualcomm HS-USB QDLoader 9008 (COM32)
Driver Info    : Lenovo Inc., leusbser.sys, 2.0.9.6
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID    : E1600400 [8953] 21002900
OPK_DATA    : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Firehose Loader...Done
Sending Loader [8953_010.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : 8953, eMMC, 64 GB
LU Count    : 1 [0x0747C000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device    : asus ASUS_Z012D [msm8953]
Software    : OPR1.170623.026.WW_Phone-15.0410.1802.44-0, WW_Phone-15.0410.1802.44-0 [Mon Feb 26 13:38:39 CST 2018]
Android Ver.    : 8.0.0
Patch Level    : 2018-02-01
Resetting FRP Lock......Done
Operation Finished.
Module Ver. 2.1