12 12
Bruno Santana

Procedimentos realizados com Sucesso com UMT !!!

Posts Recomendados

Em 22/06/2017 em 17:32, Bruno Santana disse:

D295 e D295F Dead boot repair (no modo qsdload) 100%



Operation    : Flash
Checking for existing devices... Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM21)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone... OK
Waiting for response... OK
Init Handshake Sequence... OK
Hardware ID    : E1408100 [8610] 00000000
Initializing Protocol... OK
Using Auto Selection
Preparing Firehose Loader... Done
Sending Loader [8610.ufl]... Done
Executing Loader... OK
Hardware    : 8x26, eMMC, 2 GB
Warning! High Speed Driver not installed.
Please install driver from QcFire\Drivers folder.
Payload Info    : In: 65536 [4096], Out: 49152, Sector Size: 512
Writing [PrimaryGPT_0.bin] -> [PrimaryGPT]  ... Done
Writing [modem_8192.bin] -> [modem]  ... Done
Writing [sbl1_139264.bin] -> [sbl1]  ... Done
Writing [rpm_141312.bin] -> [rpm]  ... Done
Writing [tz_142336.bin] -> [tz]  ... Done
Writing [sdi_143360.bin] -> [sdi]  ... Done
Writing [aboot_144384.bin] -> [aboot]  ... Done
Writing [rpmb_148480.bin] -> [rpmb]  ... Done
Writing [tzb_149504.bin] -> [tzb]  ... Done
Writing [abootb_150528.bin] -> [abootb]  ... Done
Writing [persist_204800.bin] -> [persist]  ... Done
Writing [laf_270336.bin] -> [laf]  ... Done
Writing [boot_319488.bin] -> [boot]  ... Done
Writing [recovery_364544.bin] -> [recovery]  ... Done
Writing [factory_475136.bin] -> [factory]  ... Done
Writing [sbl1b_581632.bin] -> [sbl1b]  ... Done
Writing [cust_655360.bin] -> [cust]  ... Done
Writing [BackupGPT_7633920.bin] -> [BackupGPT]  ... Done
Applying Patches... Done
Resetting device... Done
Operation Finished.
 

 

D295f10d_00.rar

D295.rar

 

Amigo, para esse procedimento é necessário um cabo EDL?

Compartilhar este post


Link para o post
Compartilhar em outros sites

moto g4 play frp feito segurança nova.

 

Port    : Fastboot Inteface
Baud Rate    : Not Applicable
Device    : Motorola
Operation    : New FRP Reset
Searching for Device in FastBoot Mode... OK
Reading Phone Information...
Model    : XT1626
Boot Ver.    : moto-msm8952-B1.06
Baseband    : <not found>
Software    : Blur_Version.25.211.8.athene.retail.en.US
IMEI    : 354127079192095
CPU    : MSM8952
RAM    : 2GB SAMSUNG LP3 DIE=8Gb M5=01 M6=05 M7=00 M8=1F
EMMC    : 16GB SAMSUNG QE13MB RV=08 PV=07 FV=0000000000000007
Setting Factory Mode... OK
Searching Network Interface... Found
Connecting to device... OK
Model    : Moto G (4)
Bootloader    : 0xB106
Baseband    : <Read failed>
Build    : Blur_Version.25.211.8.athene.retail.en.US
Android    : 7.0
Searching Network Interface... Found
Connecting to device... OK
Model    : Moto G (4)
Bootloader    : 0xB106
Baseband    : <Read failed>
Build    : Blur_Version.25.211.8.athene.retail.en.US
Android    : 7.0
Resetting FRP... OK
Searching for Device in FastBoot Mode... OK
Removing Factory Mode... OK
Operation Finished.
Elapsed Time: 02:19
[Module Ver. 4.3]
Log Saved to Logs\171103_092223.log

Compartilhar este post


Link para o post
Compartilhar em outros sites
Em 22/06/2017 em 17:32, Bruno Santana disse:

D295 e D295F Dead boot repair (no modo qsdload) 100%



Operation    : Flash
Checking for existing devices... Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM21)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone... OK
Waiting for response... OK
Init Handshake Sequence... OK
Hardware ID    : E1408100 [8610] 00000000
Initializing Protocol... OK
Using Auto Selection
Preparing Firehose Loader... Done
Sending Loader [8610.ufl]... Done
Executing Loader... OK
Hardware    : 8x26, eMMC, 2 GB
Warning! High Speed Driver not installed.
Please install driver from QcFire\Drivers folder.
Payload Info    : In: 65536 [4096], Out: 49152, Sector Size: 512
Writing [PrimaryGPT_0.bin] -> [PrimaryGPT]  ... Done
Writing [modem_8192.bin] -> [modem]  ... Done
Writing [sbl1_139264.bin] -> [sbl1]  ... Done
Writing [rpm_141312.bin] -> [rpm]  ... Done
Writing [tz_142336.bin] -> [tz]  ... Done
Writing [sdi_143360.bin] -> [sdi]  ... Done
Writing [aboot_144384.bin] -> [aboot]  ... Done
Writing [rpmb_148480.bin] -> [rpmb]  ... Done
Writing [tzb_149504.bin] -> [tzb]  ... Done
Writing [abootb_150528.bin] -> [abootb]  ... Done
Writing [persist_204800.bin] -> [persist]  ... Done
Writing [laf_270336.bin] -> [laf]  ... Done
Writing [boot_319488.bin] -> [boot]  ... Done
Writing [recovery_364544.bin] -> [recovery]  ... Done
Writing [factory_475136.bin] -> [factory]  ... Done
Writing [sbl1b_581632.bin] -> [sbl1b]  ... Done
Writing [cust_655360.bin] -> [cust]  ... Done
Writing [BackupGPT_7633920.bin] -> [BackupGPT]  ... Done
Applying Patches... Done
Resetting device... Done
Operation Finished.
 

 

D295f10d_00.rar

D295.rar

 

o meu da um erro 

PRIMARY GPT_0.BIN...PRIMARYGPT FAILED

IMG_20171113_165729954_HDR[1].jpg

Compartilhar este post


Link para o post
Compartilhar em outros sites

Reparo de Boot Asus ZE550KL 100% via qcfire 

 

Operation    : Flash
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM97)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID    : E1507000 [8916] 22221111
OPK_DATA    : A0E26FBE53F3C4D13F921216258EA95B127E2CBE2713A007CDDABC4A9E37FC63
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Firehose Loader...Done
Sending Loader [8916_006.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware*    : 8916, eMMC, 16 GB
Warning! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 16384, Sector Size: 512
Writing [sbl1.mbn] -> [sbl1] ...Done
Writing [ddr.mbn] -> [DDR] ...Done
Writing [rpm.mbn] -> [rpm] ...Done
Writing [tz.mbn] -> [tz] ...Done
Writing [emmc_appsboot.mbn] -> [aboot] ...Done
Writing [hyp.mbn] -> [hyp] ...Done
Writing [gpt_main0.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup0.bin] -> [BackupGPT] ...Done
Applying Patches..............Done
Resetting device...Failed
Remove cable, reconnect battery / hold Power Button ~15 seconds.
Operation Finished.
 

Compartilhar este post


Link para o post
Compartilhar em outros sites

reset frp lenovo vibe k5 a6020l36 
nesse metodo nao perde wifi 

Operation    : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM21)
Driver Info    : Lenovo Inc., leusbser.sys, 2.0.9.6
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID    : E1B09000 [8936] 01000100
OPK_DATA    : 5F5DBD11259E7F99680B3D60E74EC73BDD5387694EA6D96CBF808A68A7369E82
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Firehose Loader...Done
Sending Loader [8936_004.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware*    : 8936, eMMC, 16 GB
Warning! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 16384, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device    : LENOVO Lenovo A6020l36 [msm8916]
Software    : A6020l36_S032_160401_LAS, A6020l36_S032_160401_LAS [2016å¹´ 04月 01æ—¥ 星期五 17:25:14 CST]
Android Ver.    : 5.1.1
Resetting FRP Lock......Done
Operation Finished.
Module Ver. 1.4

k5.jpg

Compartilhar este post


Link para o post
Compartilhar em outros sites

Remoção de conta Google Asus ZenFone 4 Selfie Pro Z01MD

 

Operation    : Reset FRP
Checking for existing devices...Found
Port    : COM97
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID    : E1600400 [8953] 53893A14
OPK_DATA    : 488BC976FD1296EB66F33F733D31DE27D8D2FDD04D372181223CA9837E888597
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Firehose Loader...Done
Sending Loader [8953_006.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware*    : 8953, eMMC, 32 GB
Warning! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device    : asus ASUS_Z01MD [msm8953]
Software    : NMF26F.WW_user_12.40.273.84_20171107, WW_Z01M-WW_user_12.40.273.84_20171107-user-20171107 [Tue Nov  7 02:33:38 CST 2017]
Android Ver.    : 7.1.1
Resetting FRP Lock......Done
Operation Finished.

Compartilhar este post


Link para o post
Compartilhar em outros sites

lenovo k6 plus frp !

 

Device    : Lenovo K53
Operation    : Reset FRP
Checking for existing devices...Found
Port    : COM32
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID    : E1F00400 [8937] 00000000
OPK_DATA    : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [3]
Device may possibly not boot with this loader.
Preparing Firehose Loader...Done
Sending Loader [8937.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware*    : 8937, eMMC, 32 GB
Warning! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device    : LENOVO Lenovo K53 [msm8937]
Software    : K53_S116_161115_ROW, K53_S116_161115_ROW [Tue Nov 15 09:18:48 CST 2016]
Android Ver.    : 6.0.1
Resetting FRP Lock......Done
Operation Finished.
Module Ver. 1.5

Compartilhar este post


Link para o post
Compartilhar em outros sites

Remoção de frp G531BT na octopus deu erro. 

 

Device: Samsung Device
Operation: Reset FRP (New Method)
Port: COM7 : SAMSUNG Mobile USB Modem #2
Checking for Device... Found [Download Mode]
Reading Data from Phone... Done
Chipset: SPRD8735 [HiSpeed]
Resetting FRP Lock Data... . Done
Closing Session... Done
---------------- IMPORTANT ----------------
Wait for phone to reboot and turn on fully or TURN ON manually.
Once Phone is completely ON, wait a few minutes and then.
goto Menu > Settings > Backup and Reset and do Factory data Reset.
Elapsed Time: 00:15
[Ultimate Samsung Flasher v1.3]

Compartilhar este post


Link para o post
Compartilhar em outros sites

Crie uma conta ou entre para comentar

Você precisar ser um membro para fazer um comentário

Criar uma conta

Crie uma nova conta em nossa comunidade. É fácil!

Crie uma nova conta

Entrar

Já tem uma conta? Faça o login.

Entrar Agora
12 12