Atualizações para HWK
3 3

65 posts neste tópico

Neste Topico Iremos Post Somente Atualizaçao Modulo Hwk Original

OBS: Todo e qualquer Post n relacionado ao tema do tópico será deletato sem prévio aviso

Vamos Manter nosso forum 100% Organizado.

Atençiosamente,

Clan GSM Team.

Compartilhar este post


Link para o post
Compartilhar em outros sites

HWK_Setup_Suite_v02.08.000 Please login or register to see this link.

Compartilhar este post


Link para o post
Compartilhar em outros sites
HWK_Support_Suite_Setup_v02.08.000 Please login or register to see this link.

Compartilhar este post


Link para o post
Compartilhar em outros sites
HWK_Suite_Minor_v02.08.001

Please login or register to see this link.

Compartilhar este post


Link para o post
Compartilhar em outros sites
HWK_Suite_Minor_v02.08.002

Please login or register to see this link.

Compartilhar este post


Link para o post
Compartilhar em outros sites
HWK_Suite_Minor_v02.08.003

Please login or register to see this link.

Compartilhar este post


Link para o post
Compartilhar em outros sites
HWK_Suite_Minor_v02.08.004

Please login or register to see this link.

Compartilhar este post


Link para o post
Compartilhar em outros sites

HWK v2.0.8.5 Release 08/06/2009

Release Date: 08/06/2009

The Official release is ready in our download area Please login or register to see this link. .

WARNING !!!

If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.

UFS_DCTxBB5 v2.0.8.5

----------------------

1. New BB5 products: RM-412,RM-413,RM-443,RM-505,RM-506,RM-507,RM-570

(E75-1,E75-2,6303c,N97-1,N97-5,N97-3,6600i-1)

2. Introducing RAPU-YAMA ASIC: RM-368,RM-431,RM-432,RM-470

(6260s-1,5630d-1,5630d-1b,6700c-1) support added.

3. New DCT4+ products: RH-512,RH-513,RH-514,RH-515,RH524,RH-525,RH-543

(2330c-2,2330c-2b,2320c-2,2320c-2b,5030c-2,5030c-2b,2323c-2)

4. New DCT4+ UNL versions support:

RH-99 v5.91, RH-100 v5.80, RH-105 v5.91, RH-106 v5.80, RM-305 v5.91

(1200, 1200b, 1208, 1208b, 1650)

5. Certificates write error in DL mode fixed.

6. Check is ASIC supported by firmware for DCT4 and WD2 products.

7. Read UEM IMEI or ESN for DCT-4/WD2 ASIC 2,5,6,11 when Rd UEM.

8. Added backup of PM 120 block when make Bk.308 (if exists)

9. Added [skip Erase] option for BB5 products (for Experts Use Only)

10.Added [1331] option, to switch on/off NU48Fxxx Intel Chips Solution.

Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone.

LG GSM V 2.0.8.5

-----------------

1. MTK KG195,KP199,KP220 support added.

2. PCS files support added for MTK models.

3. Cable type indicator.

SAMs V 2.0.8.5

---------------

V 2.0.8.5

------

TRIDENT

B100K,C140i added (DUNL,IM,FL)

TRIDENT VISION

C3010,C3050,C3060R,C3110,C3110C,S3500 added (CUNL,IM,FL)

M120,M128,E1040,S3030 added (DUNL,IM,FL)

B520 Vodafone support added.

(use B520B-V model, not mix with B520, filenames are similar)

(Use [Reset MMI] if phone ask for password without SIM)

New MSL bypass algo introduced (B220,..,C3050,E1410,S3500...)

allows direct codes reading, unlock and IMEI repair.

MSL Repair introduced, allows to repair or use alien E2P

(Repair of "User Fault on Illegal Trial !!" and restore IMEI)

OM(SYSOL)

C160G added (DUNL,IM,FL,SECT)

SWIFT

B2100,C5212,E250i,F265L,F270,J700i,M158,P250,U800E ,X576

added (DUNL,IM,FL,SECT)

SWIFT-AEROFONE

B100i,B210 added (DUNL,IM,FL,SECT)

C270,E1100,E1120,E1125W,E1125-SEA,E1210M,E1210S,E1310B,

E1310M,E1310S,E1360B,E1360M,E2100,E2210 added (DUNL,IM,FL)

(Do not mix B-C-M-L-S-T-EUR-SEA models! More info on support)

B130S,B130T flashing fixed (blinking or frozen phone)

(Must select target firmware as model, e.g. model is B130 and

want to flash B130S, select B130S as the model.)

SWIFT-3G

P270 added (DUNL,FL,SECT,BT)

QUALCOMM

A777,M7600,M7603,M8800C,M8800L,S5600,S5603,S8300N added.

[Write E2P] (NVM) added.

UNLOCK and UNFREEZE added for these models: A411,A777,S7220,

S7330,S8300,S8300C,Z230 (Use [QCDI Info] button to read keys)

Old models UNLOCK and UNFREEZE: Z300,Z500,..,ZM60,..

(these are not in models list, select any model. Use

[Mobile Info] button to read keys & [unlock] to direct unlock)

We would like for some users to add localisation in their own native language to the software, localisation is added to SAMs only at the moment but will be added to other modules in future.

Conditions:-

1. Only 1 contributer per language.

2. You must know how to use the software and what each function does.

3. The chosen language is your native language or you are fluent in the selected language, for example Chinese is not my native language and I would like someone to take over from me and finish/correct as required.Please login or register to see this image.

Many thanks to all those who have supported us!!!

Odia.

Please login or register to see this link.

Please login or register to see this link.

Official SarasSoft Rapidshare Mirrors:-

Please login or register to see this link.

Compartilhar este post


Link para o post
Compartilhar em outros sites

Para que tiver dificuldades e, baixar o novo Software HWK_Suite_Minor_v02.08.005 segue em anexo.

Please login or register to see this link.

Compartilhar este post


Link para o post
Compartilhar em outros sites

Release Date: 18/08/2009

The Official release is ready in our download area Please login or register to see this link.

WARNING !!!

If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.

Please make sure you un-install all old

versions, first HWK Suite, then HWK Support Suite, you can then install

the new software, first HWK Support Suite and then HWK Suite.

You MUST update your HWK using client 2.0.9.0, old client versions will no longer work.

You MUST be running HWK software 2.0.9.0 to access support.

UFS_DCTxBB5 v2.0.9.0

----------------------

1. New BB5 products: RM-424,RM-465,RM-469,RM-481,RM-482,RM-483,

RM-491,RM-504,RM-518,RM-547,RM-555,RM-561,RM-564,RM-566,RM-602

(6720c-1,5730s-1,E52-1,E52-2,E55-1,E55-2,6710s-1,5530c-2,3720c-2,

6730c-1VF,N97-4,2700c-2,6720c-1b,6730c-1,5800d)

2. New DCT4 products: RM-519,RM-520 (2720a-2,2720a-2b)

3. New Samsung Flash Chip: 00EC2606 (K8S3215ETF)

4. Corrected VPL parsing for some models (N97)

5. Only NU48F256 left in [1331] option and moved to BB5 Tab.

6. SX4 bypass introduced using temporary NPC certificate erase.

7. [One Boot] option i ntroduced (RAPx based One MCU products)

8. Enabled Files Multiselect, when Writing Certificates.

9. Erase Option for BB5 (for Experts Use Only !)

Do not use external VPP adapter with RX2 enabled

cables, since this will put VPP direct to RX2 and its possible to KILL

the phone.

LG GSM V 2.0.9.0

-----------------

1. Unlock Codes Display for Infineon EGOLD Voice added

(Boot and See NCK Code for Instructions Press UNLOCK)

SAMs V 2.0.9.0

---------------

TRIDENT

T539 added (DUNL,IM,FL)

TRIDENT VISION

Fixed MSL algorithm for some models (C3050,...)

SWIFT

D606,D900E,E260,M2310,P220,S366,S5050,S5200 added (DUNL,IM,FL,SECT)

SWIFT-AEROFONE

B270i,C276,C276L,E1070M,E1070T,E1075,E1075L,E1105T ,E2100B,

E2210B added (DUNL,IM,FL)

QUALCOMM

Manual Port Selection Added

(Use Refresh, After Each Phone Reboot or Reconnect)

(Untic QualComm Mode, Before Flashing)

F480R,i6210,U900W added.

UNLOCK and UNFREEZE added for these models:

A736,A737,F490,G800,G800L,M7600,S5600,U900W,Z400,Z 540

We would like for some users to add localisation in their own native

language to the software, localisation is added to SAMs only at the

moment but will be added to other modules in future.

Conditions:-

1. Only 1 contributer per language.

2. You must know how to use the software and what each function does.

3. The chosen language is your native language or you are fluent in the

selected language, for example Chinese is not my native language and I

would like someone to take over from me and finish/correct as required.Please login or register to see this image.

Odia.

Please login or register to see this link.

Please login or register to see this link.

Compartilhar este post


Link para o post
Compartilhar em outros sites

HWK_Suite_Setup_v02.09.000

Please login or register to see this link.

Compartilhar este post


Link para o post
Compartilhar em outros sites

HWK_Suport_Suite_Setup_v02.09.000

Please login or register to see this link.

Compartilhar este post


Link para o post
Compartilhar em outros sites

HWK Release 23/03/2010

Release Date: 23/03/2010

The Official release is ready in our download area Please login or register to see this link. .

WARNING !!!

If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.

Please make sure you un-install all old versions, first HWK Suite, then HWK Support Suite, you can then install the new software, first HWK Support Suite and then HWK Suite.

You MUST update your HWK using client 2.0.10.0, old client versions will no longer work.

You MUST be running HWK software 2.0.10.0 to access support.

UFS_DCTxBB5 v2.0.10.0

-----------------------

1. New BB5 products:

RM-381,RM-455,RM-468,RM-492,RM-529,RM-530,RM-570,RM-573,RM578,RM-579,RM-584,RM-599,RM-600,RM-635

(6750-1,6350-1b,5730s-2,6790s-1b,E72-2,E72-1,3208c,6760s-1,2730c-1,2730c-1b,E72-5,6790s-1c,E63-5,2690)

2. New DCT4+ products: RM-590,RM-591 (2220s-2,2220s-2b)

3. More DCT4+ added for unlock (ASIC 3168) see corresponding list.

4. McuSw tag fixed in vpl parser.

5. Fixed time-out bug for some RAPU models.

6. [Det.Log] CheckBox now active, can auto create LOG file.

7. [info] Shows Camera DCC settings and Status (for both Cameras)

8. [PM Edit] Revised: Read/Write DCC, Simlock Data, Parallel Model.

9. Increased PM read default margins, to have DCC in read PM for DCT4+

10.[Check Ask/Rpl] to Check Ask/Rpl files contents (Asic 2,5,6,7)

11.Fixed [Format] bug for new BB5 Symbian products.

12.ENO File flashing support (E63,E66,..,N97,..)

13.[Locks] for BB5 remade, now calculate codes for SLPA and SL20

14.[Check] Shows PASUBTOC SL related contents.

Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone.

LG GSM V 2.0.10.0

------------------

1. MTK GB160,GB165,GB170,GB175,GB190,GB195,KG198 added.

2. Infineon GB101,GB109,GB110,GB125,GB130,KE858,KP108 added.

3. Infineon New Flash Chip SV7E3204UTA support.

4. ADI KG129,KG248,KG298 added.

5. " Cannot open file " Bug Fixed.

SAMs V 2.0.10.0

----------------

TRIDENT

C158,C158B,C188L,C240L,C258,C260B,C260L,C260M,C300 B,E576,E758,

X138,X180,X468P,X478,X568 added (DUNL,IM,FL)

USB flashing introduced for HPE models (U600,.. Approx. 2x faster)

TRIDENT VISION

B3210,B3310,B3313,C3010S,C3050C,C3053,C3060,C3110H ,M620N,

S3030C,S3500C,S3500H,S3500i,S3501C,S5150,S5150C added (CUNL,IM,FL)

MSL3 bypass introduced (B3210,B3310,B3313,C3060,C3060R,...)

USB UI functions introduced, allows to unlock USB only phones.

USB flashing introduced (Approx. 5x faster)

(Cannot use USB flashing of dead phones which have UL erased or damaged.

RJ45 flashing can be used to recover from erased UL situation)

SWIFT

A177,A226,A227,A237,A257,B3410,B5702,B5712C,B5722, B5722C,C3212,

C3510,C3518,C6112,C6112C,D980F,E200E,E208B,E250L,E 848i,F118,

F278,J150B,M2710,M2710C,M2710L,M3510C,S3100,S3110, S3110C,

S3600C,S3600H,S5200C,T219,T329,T729 added(UNL,IM,FL)

Added ENG flashing for DUOS FOTA models (D988,B5712C,..)

Auth. Boot and Firmware Sign. for Secure models (B5722,C3510,C6112,S3100)

B5702,D988,F265L,S5050 (SECT) bug fixed.

CSC Area format added.

SWIFT-AEROFONE

A137,CC01i,E1070C,E1100C,E1101C,E1107,E1113C,E1120 C,E1210,

E1310C,E1310E,E1360,E1360C,E1360S,E2100C,E2210C,E2 210H added (DUNL,IM,FL)

E1080,E1080C,E1080T,E1085,E1085L,E1085T,E1088C,E11 00H,E1150,

E1150C,E1160,E2120,E2120B,E2120C,E2130 added (CUNL,FL)

SWIFT-3G

C5110,C5130,C5130S,C5130U,J800R added (CUNL,FL,SECT,BT)

P270 (CUNL,SECT) bug fixed.

E2P Write is supported only for C5130,C5130S and C5130U.

QUALCOMM

A551,A561,A637,A746,A747,A766,A767,A811,A821,A827, A836,A837,

A867,C5220,C5510H,C5510U,G508,G508E,M7600B,M7600H, S5350,

S5600B,S5600L,S5608U,S5510,S7120U,S7350C,S7350E,S7 350F,

S7350H,S7350i,S7520U,S8300H,T469,T659,T749,T919,T9 29,U808 added.

Fixed flashing of non page size aligned files (rc1,rc2,ffs)

Added flashing support for QSC62xx models.

UNLOCK and UNFREEZE added for these models:

A551,A637,A767,A827,A837,C5220,F400,S5510,S7350,S7 350C,

S7350F,S7350i,T639,Z170,Z240E,Z360,Z720,ZV40

BROADCOM

QC Legacy BroadCom models introduced:

i6220,S3650,S3650C,S3650M,S3650W,S3653,S3653W,S523 0,S5230G,

S5230H,S5230M,S5230W,S5233A,S5233S,S5233T,S5233W,S 5560,S5560C,

S7070 (CUNL,FL) To read codes use:

[Mobile Info] button using USB Cable (Phone Switched-ON)

and after [QCDI Info] button, using RJ45 Cable (Phone-OFF)

QC Legacy BroadCom models Full Flashing (with BOOT Change)

[bOOT Repair] for QC Legacy BroadCom models added.

Boot Repair and Codes Read is possible only for phones with

NM_20 pin USB/RJ45 connector !

COMMON

Log to file added.

CLONE error message fixed.

Many thanks to all those who have supported us!!!

Odia.

Please login or register to see this link.

Please login or register to see this link.

Official SarasSoft Rapidshare Mirrors:-

Please login or register to see this link.

Compartilhar este post


Link para o post
Compartilhar em outros sites

HWK Release 24/03/2010

The Official release is ready in our download area Please login or register to see this link. .

WARNING !!!

If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.

UFS_DCTxBB5 v2.0.10.1

-----------------------

1. RM-392,RM-393 (2680s-2,2680s-2b) v6.17 unlock bug fixed.

2. Box Init bug after BB5 flash fixed.

Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone.

Many thanks to all those who have supported us!!!

Please login or register to see this link.

Compartilhar este post


Link para o post
Compartilhar em outros sites

Arquivos no FTP ClanGSM®

HWK Support Suite Setup v02.10.000

[DOWNLOAD]http://www.heitorluis.clangsm.net/hwk/HWK_Support_Suite_Setup_v02.10.000.exe[/DOWNLOAD]

HWK Suite Setup v02.10.000

[DOWNLOAD]http://www.heitorluis.clangsm.net/hwk/HWK_Suite_Setup_v02.10.000.exe[/DOWNLOAD]

HWK Suite Minor v02.10.001

[DOWNLOAD]http://www.heitorluis.clangsm.net/hwk/HWK_Suite_Minor_v02.10.001.exe[/DOWNLOAD]

Compartilhar este post


Link para o post
Compartilhar em outros sites

HWK_Setup_Suite_v02.08.000 Please login or register to see this link. [/ QUOTE]

esse link nao da pra baixa o arquivo tem como corrigir

Compartilhar este post


Link para o post
Compartilhar em outros sites

HWK_Setup_Suite_v02.08.000 Please login or register to see this link. [/ QUOTE]

esse link nao da pra baixa o arquivo tem como corrigir

Amigo, temos versões mais novas, atualize sua box.

Compartilhar este post


Link para o post
Compartilhar em outros sites

com essa atualização, vamos conseguir desbloquear 2330 , 1661

Compartilhar este post


Link para o post
Compartilhar em outros sites

com essa atualização, vamos conseguir desbloquear 2330 , 1661

Senhor o 1661 nao tem solução; a nova atualização faz os aparelhos abaixo;

Please login or register to see this link.

Compartilhar este post


Link para o post
Compartilhar em outros sites

Explicando um pouco melhor:

1. RM-392,RM-393 (2680s-2,2680s-2b) v6.17 unlock bug fixed.

2. Box Init bug after BB5 flash fixed.

More DCT4+ added for unlock (ASIC 3168) see corresponding list.

Novos modelos DCT4 ( ASIC 3168 ) Adicionados para desbloqueio :

7100s RM-438

7100s RM-438

7100s RM-438

2330c RM-512

2330c RM-512

2323c RM-543

2323c RM-543

2323c RM-543

2630 RM-298

2720 RM-519

Compartilhar este post


Link para o post
Compartilhar em outros sites

The Official release is ready in our download area Please login or register to see this link. .

WARNING !!!

If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.

This release contains a new update client which you ONLY need to run if you have the message "None Authorised Copy of Software detected, Please Use Original Install Package:0" That means users without the message do not need to run this new update client, but if you do no harm will be done, you just lose 1 log.

UFS_SAMs v2.0.10.2

SWIFT-AEROFONE

T239 added (CUNL,FL)

BROADCOM

Fixed UnFreeze Key Display.

Please login or register to see this link.

Compartilhar este post


Link para o post
Compartilhar em outros sites

com essa atualização, vamos conseguir desbloquear 2330 , 1661

topico para atualizaçoes hwk !

faça sua solicitaçao no local adequado,evitando assim,post desnecessario em local errado !

Please login or register to see this link.

Compartilhar este post


Link para o post
Compartilhar em outros sites

Release Date: 12/05/2010

The Official release is ready in our download area Please login or register to see this link. .

WARNING !!!

If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.

UFS_SAMs v2.0.10.3

--------------------

V 2.1.0.3

------

TRIDENT

M628N added (DUNL,IM,FL)

SWIFT

A256,J218,S3600i,S3601C added (UNL,IM,FL)

SWIFT-3G

B2703 added (CUNL,FL,SECT,BT)

QUALCOMM

A747,C5510,C5510U,T929 UNLOCK and UNFREEZE added.

Improved Decryption algo, more models UNLOCK and

UNFREEZE supported by Default.

BROADCOM

S5230K,S5230R added (CUNL,FL,BRP)

B5310,S5620,S5628,S7070C added (FL)

Use Samsung Kies drivers for these models (B5310,S562x)

Fixed 'Cannot Find NandInfo !' on some models.

COMMON

Log to file fixed for Trident models.

Introduced New Extremely Fast Key Calculation Algorithm (DHLT)

Need few hours for Tables generation at First Software startup.

But after, Key calculation for Qualcomm, Broadcom and Trident

platforms will take few seconds. DHLT ©SarasSoft.

Users who not want to wait few hours for DHLT table generation can download the files from our Official Rapidshare mirror. The files should be placed into x:\Program Files\SarasSoft\UFS\UFS_SAMs\_DHT

Many thanks to all those who have supported us!!!

Odia.

Please login or register to see this link.

Please login or register to see this link.

Compartilhar este post


Link para o post
Compartilhar em outros sites
HWK_Suite_Minor_v2.10.003

Please login or register to see this link.

Compartilhar este post


Link para o post
Compartilhar em outros sites

HWK Release 06/07/2010

Release Date: 06/07/2010

The Official release is ready in our download area Please login or register to see this link. .

WARNING !!!

If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.

LG GSM V 2.0.10.4

------------------

1. Infineon GB107,GB108,GB115,GS100,GS101,GS102,GS105,

GS106,GS107,GS108,KG289,KP109 added.

UFS_SAMs v2.0.10.4

--------------------

TRIDENT VISION

B3210M added.

Bug in E2P Filename Display fixed.

OM(SYSOL)

On the Fly E2P Patch added to keep Original IMEI number.

SWIFT

C3212i added(UNL,IM,FL)

On the Fly E2P Patch added to keep Original IMEI number.

SWIFT-AEROFONE

E1080i,E1086,E1086L,E1170,T139 added (CUNL,PUNL,PIM,FL)

On the Fly E2P Patch added to keep Original IMEI number.

On the Fly MCU Patch added to bypass MSL security for MSL3

(MSLC16) products (E1080,E1080i,E1086,E1150,E1160, ...)

after is possible Direct Unlock, Rebuild IMEI in normal way.

QUALCOMM

S3370,S5350M added (FL,CUNL,UNFR)

S5350 added (CUNL,UNFR)

Increased Speed in Communications (NVM Read/Write, RAM Read)

BROADCOM

B5310U added (FL)

i6230,S3653M added (CUNL,FL,BRP)

Combo Cable (USB+RJ45) Support added, not need Manipulations

with Cable when use [QCDI Info]

Corrected CSC,APP,PFS flashing for BCM2153 platform (B5310,..)

[boot Change] Product will Restart after success Boot Change,

if Failed, will stay in Download Mode to Allow Retry.

[Full Download] will Write All without Restart after Boot Change.

COMMON

[Refresh] will Show Avalaible Ports List with Full Names.

Many thanks to all those who have supported us!!!

Odia.

Please login or register to see this link.

Please login or register to see this link.

Official SarasSoft Rapidshare Mirrors:-

Please login or register to see this link.

Compartilhar este post


Link para o post
Compartilhar em outros sites

Crie uma conta ou entre para comentar

Você precisar ser um membro para fazer um comentário

Criar uma conta

Crie uma nova conta em nossa comunidade. É fácil!


Crie uma nova conta

Entrar

Já tem uma conta? Faça o login.


Entrar Agora
3 3

  • Conteúdo Similar

    • Por Moisés Sielski
      Vendo pacote com as box abaixo:
      Smart Clip 1 + Scard Dongle 
      SetoolBox3
      Z3X Samsung + LG 
      UFSMicro HWK + Clip.
      Vygis Preta full ativada LG
      Também acompanha Masterbox com cabos + Mxkey verde.
      Possuo os cabos para todas as box, são centenas de cabos.
      Favor mandar MP para obter o valor, posso parcelar via MercadoPago, Pagseguro ou dar desconto para pagamento a vista via depósito no Itaú.
      Please login or register to see this attachment.
      Please login or register to see this attachment.
      Please login or register to see this attachment.
      Please login or register to see this attachment.
      Please login or register to see this attachment.
      Please login or register to see this attachment.
    • Por eduardogcunha
      Bom dia. Troquei a pouco tempo meu pc e tive que formata-lo na semana passada. Reinstalei minha box hwk, porem ao fazer o update pelo ufspanel 2.3.0.7 o support so da erro. Alguem sabe dizer se esta mesmo fora do ar ou onde consigo uma solução??
      Desde ja agradeço.
      Please login or register to see this attachment.
    • Por Marquinhos Saraiva
      como atualizar a ufs/hwk?
      mudei meu sistema e não consigo atualizar  minha box para Ufs_Panel_ 2.3.0.5 !
       
      me ajudem!
       
      ela abre o ufs_panel_2305
       
      eu clico em update box e trava em 2% em Wait, Getting Data @...
       
      windows 8.1
    • Por vande1985
      Pessoal, peguei um nokia 1208b rh-106 da vivo pra desbloquear, ele tva na versão 4.00
      Primeiro fiz o jumper dos filtros ai gravai uma pm.. sem sinal, vivo ainda com sinal
      Fiz uma atualização, passei uma flash na versão 4.11, gravei outra pm, mesma coisa, sem sinal, só na vivo q tinha sinal
      Tentei as flashs nas versões 4.00, 4.11, 5.06 e 5.32 , gravei 6 pm diferentes, e nenhuma fez dar sinal oi/tim/claro, todas insistiram em funcionar na vivo
      Tentei tbem resetar e desbloquear todas elas!
      Já tentei com os filtros e sem, fiz o jumper pra mudar a frequencia e mesmo assim não dá sinal! Não entendo mesmo feito o jumper, como a vivo ainda funciona!

      Preciso de ajuda!
    • Por Marquinhos Saraiva
      postar somente flashes para NOKIA vamos manter nosso forum organizado!
           
  • Quem Está Navegando   0 membros estão online

    Nenhum usuário registrado visualizando esta página.