frp j320m

Em 01/02/2018 em 11:30, Bruno Santana disse:

asus zenfone ze550kl- Qualcomm HS-USB QDLoader 9008
reparo 100% 
telefono volto a entra em fastboot 
agradecimento pelo arquivo gsmdevelopers
 

Asus ZE550KL Z00LD Dead Recover QPST File.rar

Obrigado amigo, valeu mesmo

Reset Conta Mi Note 5 android 8.1.0 (finalmente!)  

 

Operation    : Reset Mi Account
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM20)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.0.5
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID    : E1C00C00 [8996] 00000000
OPK_DATA    : F7337FE47B192EF4D1BA34CB4E879F0C6B771D06D2DE87BF21F65BA3303834E1
Initializing Protocol...OK
Sending Loader [prog_emmc_firehose_Sdm660_ddr.elf]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : MSM8996, eMMC, 64 GB
LU Count    : 1 [0x0747C000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 131072, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device    : Xiaomi Redmi Note 5
Software    : OPM1.171019.011, V9.5.19.0.OEIMIFA [Fri Jul  6 19:09:51 WIB 2018]
Android Ver.    : 8.1.0
Patch Level    : 2018-06-01
Resetting Mi Account Data...Done
Preparing Data...Done
Formatting Userdata...Done
When phone is completely ON, connect to Internet and add Mi Account.
-------------- INFORMATION --------------
New Firmware may cause hang on logo.
In such case, you need to flash phone to recover.
Or downgrade firmware and try Reset Mi Account again.
Operation Finished.
Module Ver. 2.6

Reset freecel Free Link

 

Reparo boot XT1640 100% done 

 

 

Model    : XT1643
Operation    : Boot Repair
Checking for existing devices...Found
Port    : Qualcomm HS-USB QSC Diagnostics 9065 (COM77)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID    : E1209700 [8952] 00002803
OPK_DATA    : 617E50AB1CB133CC88721091CD79DBC95BF9A3B84FA9489DA856F25CAD8A384B
Initializing Protocol...OK
Sending Loader...Done
Executing Loader...OK
CPU Version    : 1.1
Secure    : Yes
Chipset    : 8952
Chip Type    : eMMC
Protocol    : 1
Payload    : 4096/1048576
Sectors    : 61071360
Sector Size    : 512
Reading Partition Table...OK
Writing Data [aboot]...Done
Writing Data [rpm]...Done
Writing Data [tz]...Done
Writing Data [hyp]...Done
Writing Data [cmnlib]...Done
Writing Data [keymaster]...Done
Writing Data [sbl1]...Done
Rebooting device to Fastboot...Done
Please use UMT GSM Module to flash latest firmware now.
Operation Finished.
Module Ver. 2.6

amigo poderia me explicar melhor como faco para reparar?

 

frp J1 mini 

 

Reset Conta Mi Redmi 5 plus 8.1.0

 

Operation    : Reset Mi Account
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM97)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID    : E1600400 [8953] 00000000
OPK_DATA    : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : 8953, eMMC, 64 GB
LU Count    : 1 [0x0747C000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device    : Xiaomi Redmi 5 Plus [msm8953]
Software    : ZQL1711-vince-build-20180817135416, V9.6.5.0.OEGMIFD [Fri Aug 17 13:54:03 WIB 2018]
Android Ver.    : 8.1.0
Patch Level    : 2018-08-05
Resetting Mi Account Data...Done
Preparing Data...Done
Formatting Userdata...Done
When phone is completely ON, connect to Internet and add Mi Account.
-------------- INFORMATION --------------
New Firmware may cause hang on logo.
In such case, you need to flash phone to recover.
Or downgrade firmware and try Reset Mi Account again.
Operation Finished.
QcFire Ver. 2.8

 

FRP XT1726 

 

 

Flash Motorola XT1033

 

Mi phone 
MI 6
Android 8.0.0
patch de segurança 01/05/2018
versão do MIUI global 9.5 estável 9.5.8.0 ( OCAMIFA ) 
numero de modelo MCE16
IMG do TP ( test point ) 
 

FRP Moto G5s Plus

FRP POSITIVO S420

Frp Moto G5s

frp moto g5

Flash LG D385 ( L 80 )

reset fpr lg K8 4g lte

reset fpr j1 2016 j120H

frp xt 1802

Redmi Note 5 Pro - Mi Account 

 

Pra confirmar mais um Xt1792 FRP feito 

Reset frp motorola xt1792  8.1.0

frp blu grand max 100%

frp moto g3

FRP RedMi 4x

frp moto g4 plus

frp xt 1563 (moto x play)