Cyclonebox Presenta REPAIR CONTACT SERVICE by Security Test (with log)

hola a todos

Pasos para eliminar CONTACT SERVICE by security test

1.- Press read info/phone info

Código:

MCU Version V 05.80MCU Date 18-12-08Product RM-495Manufacturer © Nokia IMEI 35521203534xxxxMastercode 7652254371IMEI Spare 3A55120253437707IMEI SV 3355120253437727F6000000PPM V 05.80, 18-12-08, RM-495, © Nokia , UAPSN RFC095299Product Code 0577624Module Code 0204024Basic Product Code 0567773PSD 0000000000000000LPSN 0RETU 16TAHVO 22AHNE 30HW 3000RFIC 06540601DSP ICPR72_08w50LCD SEIKOBT 2222-143CSimlock Server SIMLOCK SERVERSimlock Key 3340201549764300Simlock Profile B000000000000000Simlock Key Cnt 0Simlock FBUS Cnt 0Simlock [1,1] State: CLOSED Type: 7FFF6F07FFFFFFFF @ FC00 Data: 334020

2.- Press SELFTEST

Código:

Selftests to proceed: 29Passed ST_EAR_DATA_LOOP_TESTPassed ST_SIM_CLK_LOOP_TESTPassed ST_SIM_IO_CTRL_LOOP_TESTPassed ST_SLEEP_X_LOOP_TESTPassed ST_UEM_CBUS_IF_TESTPassed ST_KEYBOARD_STUCK_TESTPassed ST_CAMERA_IF_TESTPassed ST_BACKUP_BATT_TESTPassed ST_LCD_TESTPassed ST_LPRF_IF_TESTPassed ST_LPRF_AUDIO_LINES_TESTPassed ST_CURRENT_CONS_TESTPassed ST_RADIO_TESTPassed ST_BACKLIGHT_TESTPassed ST_SIM_LOCK_TESTFailed ST_SECURITY_TEST <<< Aqui muestra falloPassed ST_BT_WAKEUP_TESTPassed ST_HOOKINT_TESTPassed ST_TAHVOINT_TESTPassed ST_BTEMP_TESTPassed ST_IIC_TESTPassed ST_EXT_DEVICE_TESTPassed ST_CDSP_SLEEPCLK_FREQ_TESTPassed ST_CDSP_SLEEPCLOCK_FREQ_TESTPassed ST_CDSP_RF_BB_IF_TESTPassed ST_CDSP_RF_SUPPLY_TESTPassed ST_CDSP_TX_PLL_PHASE_LOCK_TESTPassed ST_CDSP_RX_IQ_LOOP_BACK_TESTPassed ST_CDSP_GSM_TX_POWER_TESTSelftests done, Tests total: 29, Tests passed: 28, Tests not passed: 1

3.- Press boton ANALIZE SECURITY

Código:

Started Phone Security Analysis...MCU Version V 05.80MCU Date 18-12-08Product RM-495Manufacturer © Nokia IMEI 35521203534xxxxMastercode 7652254371Reading Security Block...Security block OK and saved to "RM-495_35521203534xxxx_27072010_125615 p.m..SecurityBlock.PM"Step 1 : Testing SIMLOCKSIMLOCK SEFLTEST PASSED OK!Step 2 : Testing SECURITY-- SECURITY PROBLEM --Phone have failed SECURITY Test, that means Superdongle Area is DAMAGED!To repair it, simply slick "SX4 Authorization / SD Repair" button.After SX4/SD Repair, don't forget to write PM file with fields 1,309 (if SW don't do this automatically)Additionaly, Checking HWC/CCC Certs...Booting CMT...CMT_SYSTEM_ASIC_ID: 000000010000022600010006030C192101033000CMT_EM_ASIC_ID: 00000296CMT_EM_ASIC_ID: 00000B22CMT_PUBLIC_ID: 1700020DEB337F561D4F3B7686A150B5288D828CCMT_ASIC_MODE_ID: 00CMT_ROOT_KEY_HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723CMT_BOOT_ROM_CRC: 273F6D55CMT_SECURE_ROM_CRC: DFAAF68FCMT Ready!Searching for BootCode: DualLine 32BitRAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5Flashbus Write baud set to 1.0MbitsFlashbus Read baud set to 98KbitsUsing OLD BB5 FLASHING PROTOCOLFlashChip[0,CMT]: 0x0089898200008A31, Intel, NORFlashContent[0,CMT]: 00000000000000000000000000000000, NORFlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMCTransmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bitSearching for BootCode: DualLine 32BitFlashChip 0x00898982 (Intel), Size: 64MBytes, VPP: 9VRAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHMFlashbus Write baud set to 2.0MbitsTransmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bitBox TX2 Data Pin set to: Service Pin 3Box VPP disabledInternal CMT Phone VPP EnabledPAPUBKEYS Hash for CMT: 0C917F11196FDB7378C18EF7260698CA4489DCA0APE Subsystem Not FoundFlashbus Write baud set to 5.0MbitsHWC Looks OK!CCC Looks OK!Restarting MCU...-- SECURITY PROBLEM --Step 3 : Analyzing Security Block"1700020DEB337F561D4F3B7686A150B5288D828C.C0001B3F" Exists, That is good...Checking SUPERDONGLE...SUPERDONGLE FOUND AND CHECKSUM OK! PASSED!Checking SIMLOCK...Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)Checking MCU&DSP TIMESTAMPS...MCU&DSP TIMESTAMPS FOUND AND CHECKSUM OK! PASSED!Checking CMLA KEYS...Failed to decode Security Section, Box Reported: Security Section Checksum Error (decryption fails?)Checking ECC KEYS...Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)Checking DIV KEYS...Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)Analyze finished!

4.-Press boton SX4/SD REPAIR

Código:

SX4 Authorization / SD Repair Procedure Started...."1700020DEB337F561D4F3B7686A150B5288D828C.C0001B3F" Exists, That is good...MCU Version V 05.80MCU Date 18-12-08Product RM-495Manufacturer © Nokia IMEI 35521203534xxxxMastercode 7652254371Reading Security Block...Security block OK and saved to "RM-495_35521203534xxxx_27072010_010944 p.m..SecurityBlock.PM"SX4 Status: Not authorized (74)Started mutual authenthication with card...Receiving Phone Seed 1...Phone Seed 1 ReceivedSending calculated Data 1, and expecting Seed 2...Calculated Data 1 accepted, Phone Seed 2 ReceivedSending calculated Data 2Calculated Data 2 sent, Checking Authorization Status againAuthorization successfully finished!Looking for Virgin PM In Database...Found, writing...[1,0] Written, Length: 12 bytes, Status: OK[1,1] Written, Length: 70 bytes, Status: OK[1,2] Written, Length: 70 bytes, Status: OK[1,3] Written, Length: 70 bytes, Status: OK[1,4] Written, Length: 70 bytes, Status: OK[1,5] Written, Length: 276 bytes, Status: OK[1,6] Written, Length: 276 bytes, Status: OK[1,7] Written, Length: 276 bytes, Status: OK[1,8] Written, Length: 276 bytes, Status: OK[1,9] Written, Length: 384 bytes, Status: OK[1,10] Written, Length: 384 bytes, Status: OK[1,11] Written, Length: 384 bytes, Status: OK[1,12] Written, Length: 384 bytes, Status: OK[1,13] Written, Length: 384 bytes, Status: OK[1,14] Written, Length: 384 bytes, Status: OK[1,15] Written, Length: 384 bytes, Status: OK[1,16] Written, Length: 384 bytes, Status: OK[1,17] Written, Length: 32 bytes, Status: OK[1,19] Written, Length: 16 bytes, Status: OK[1,20] Written, Length: 32 bytes, Status: OK[309,0] Written, Length: 4 bytes, Status: OK[309,1] Written, Length: 2 bytes, Status: OK[309,2] Written, Length: 12 bytes, Status: OK[309,4] Written, Length: 12 bytes, Status: OK[309,5] Written, Length: 12 bytes, Status: OK[309,7] Written, Length: 12 bytes, Status: OK[309,8] Written, Length: 12 bytes, Status: OK[309,17] Written, Length: 12 bytes, Status: OK[309,22] Written, Length: 12 bytes, Status: OKWrite PM Finished, Record written OK: 29, Record written NOT OK: 0

Al terminar estos simples pasos se soluciona el contact service by security test

Pero siempre puedes comprobar

1.- Press boton SELFTEST

Código:

Selftests to proceed: 29Passed ST_EAR_DATA_LOOP_TESTPassed ST_SIM_CLK_LOOP_TESTPassed ST_SIM_IO_CTRL_LOOP_TESTPassed ST_SLEEP_X_LOOP_TESTPassed ST_UEM_CBUS_IF_TESTPassed ST_KEYBOARD_STUCK_TESTPassed ST_CAMERA_IF_TESTPassed ST_BACKUP_BATT_TESTPassed ST_LCD_TESTPassed ST_LPRF_IF_TESTPassed ST_LPRF_AUDIO_LINES_TESTPassed ST_CURRENT_CONS_TESTPassed ST_RADIO_TESTPassed ST_BACKLIGHT_TESTPassed ST_SIM_LOCK_TESTPassed ST_SECURITY_TESTPassed ST_BT_WAKEUP_TESTPassed ST_HOOKINT_TESTPassed ST_TAHVOINT_TESTPassed ST_BTEMP_TESTPassed ST_IIC_TESTPassed ST_EXT_DEVICE_TESTPassed ST_CDSP_SLEEPCLK_FREQ_TESTPassed ST_CDSP_SLEEPCLOCK_FREQ_TESTPassed ST_CDSP_RF_BB_IF_TESTPassed ST_CDSP_RF_SUPPLY_TESTPassed ST_CDSP_TX_PLL_PHASE_LOCK_TESTPassed ST_CDSP_RX_IQ_LOOP_BACK_TESTPassed ST_CDSP_GSM_TX_POWER_TESTSelftests done, Tests total: 29, Tests passed: 29, Tests not passed: 0

Despues READ INFO/ PHONE INFO

Código:

MCU Version V 05.80MCU Date 18-12-08Product RM-495Manufacturer © Nokia IMEI 35521203534xxxxMastercode 7652254371IMEI Spare 3A55120253437707IMEI SV 3355120253437727F6000000PPM V 05.80, 18-12-08, RM-495, © Nokia , UAPSN RFC095299Product Code 0577624Module Code 0204024Basic Product Code 0567773PSD 0000000000000000LPSN 0RETU 16TAHVO 22AHNE 30HW 3000RFIC 06540601DSP ICPR72_08w50LCD SEIKOBT 2222-143CSimlock Server SIMLOCK SERVERSimlock Key 3340201549764300Simlock Profile B000000000000000Simlock Key Cnt 0Simlock FBUS Cnt 0Simlock [1,1] State: CLOSED Type: 7FFF6F07FFFFFFFF @ FC00 Data: 334020

Querido muito bom sua ajuda mais queríamos que o senhor fosse mais direto, mais especifico no seu post. Agradecemos.