Easy-Jtag Update 1.0.49. EMMC tool improved, M110s,M250Ss added

Warning. HOT UPDATE. EASY-JTAG 1.0.49 Update. M110S, M250S, LG CYON, EMMC improved

JTAG Tool news:

Added:

- support Samsung SHW-M110S (Read/Write/Easy Repair)

- support Samsung SHW-M250S (Read/Write/Easy Repair)

- support LG CYON KU4300 (Read/Write/Easy Repair)

- support Huawei E1732 USB Modem (Read/Write)

- support Huawei E173u USB Modem (Read/Write)

EMMC Tool news:

- Box firmware 1.46 / Improved eMMC Write Speed

- Added full decoding extCSD register , you can see ReadOnly flags etc..

P.S. Still need other JTAG?

Successefuly connected to box on COM7

Box S/N: **************, ,FW Ver.: 01.46

Loading eMMC Addon Firmware...

Init EMMC...

EMMC CID: 45010053454D3034470033B670513007

EMMC ID: 0x0045

EMMC NAME: SEM04G

EMMC CSD: D00F00320F5903FFFFFFFDFF924040C9

=============================================

Extended CSD rev 1.5 (MMC 4.41)

=============================================

Card Supported Command sets [s_CMD_SET: 0x01]

HPI Features [HPI_FEATURE: 0x01]:

implementation based on CMD13

Background operations support [bKOPS_SUPPORT: 0x01]

Background operations status [bKOPS_STATUS: 0x00]

1st Initialisation Time after programmed sector [iNI_TIMEOUT_AP: 0x0a]

Power class for 52MHz, DDR at 3.6V [PWR_CL_DDR_52_360: 0x00]

Power class for 52MHz, DDR at 1.95V [PWR_CL_DDR_52_195: 0x00]

Minimum Performance for 8bit at 52MHz in DDR mode:

[MIN_PERF_DDR_W_8_52: 0x00]

[MIN_PERF_DDR_R_8_52: 0x00]

TRIM Multiplier [TRIM_MULT: 0x02]

Secure Feature support [sEC_FEATURE_SUPPORT: 0x15]

Secure Erase Multiplier [sEC_ERASE_MULT: 0x96]

Secure TRIM Multiplier [sEC_TRIM_MULT: 0x96]

Boot Information [bOOT_INFO: 0x07]

Device supports alternative boot method

Device supports dual data rate during boot

Device supports high speed timing during boot

Boot partition size [bOOT_SIZE_MULTI: 0x08]

Access size [ACC_SIZE: 0x06]

High-capacity erase unit size [HC_ERASE_GRP_SIZE: 0x04]

High-capacity erase timeout [ERASE_TIMEOUT_MULT: 0x01]

Reliable write sector count [REL_WR_SEC_C: 0x01]

High-capacity W protect group size [HC_WP_GRP_SIZE: 0x04]

Sleep current (VCC) [s_C_VCC: 0x08]

Sleep current (VCCQ) [s_C_VCCQ: 0x07]

Sleep/awake timeout [s_A_TIMEOUT: 0x11]

Sector Count [sEC_COUNT: 0x00748000]

Minimum Write Performance for 8bit:

[MIN_PERF_W_8_52: 0x0a]

[MIN_PERF_R_8_52: 0x0a]

[MIN_PERF_W_8_26_4_52: 0x0a]

[MIN_PERF_R_8_26_4_52: 0x0a]

Minimum Write Performance for 4bit:

[MIN_PERF_W_4_26: 0x0a]

[MIN_PERF_R_4_26: 0x0a]

Power classes registers:

[PWR_CL_26_360: 0x00]

[PWR_CL_52_360: 0x00]

[PWR_CL_26_195: 0x00]

[PWR_CL_52_195: 0x00]

Partition switching timing [PARTITION_SWITCH_TIME: 0x01]

Out-of-interrupt busy timing [OUT_OF_INTERRUPT_TIME: 0x02]

Card Type [CARD_TYPE: 0x07]

CSD structure version [CSD_STRUCTURE: 0x02]

Command set [CMD_SET: 0x00]

Command set revision [CMD_SET_REV: 0x00]

Power class [POWER_CLASS: 0x00]

High-speed interface timing [HS_TIMING: 0x00]

Erased memory content [ERASED_MEM_CONT: 0x00]

Boot configuration bytes [PARTITION_CONFIG: 0x00]

Not boot enable

No access to boot partition

Boot config protection [bOOT_CONFIG_PROT: 0x00]

Boot bus Conditions [bOOT_BUS_CONDITIONS: 0x01]

High-density erase group definition [ERASE_GROUP_DEF: 0x00]

=============================================

Boot write protection status registers [bOOT_WP_STATUS]: 0x00

Boot Area Write protection [bOOT_WP]: 0x00

Power ReadOnly locking: possible

Permanent ReadOnly locking: possible

Read Only lock status: not locked

=============================================

User area write protection register [uSER_WP]: 0x00

FW configuration [FW_CONFIG]: 0x01

RPMB Size [RPMB_SIZE_MULT]: 0x01

Write reliability setting register [WR_REL_SET]: 0x1f

Write reliability parameter register [WR_REL_PARAM]: 0x04

Enable background operations handshake [bKOPS_EN]: 0x00

H/W reset function [RST_N_FUNCTION]: 0x00

HPI management [HPI_MGMT]: 0x00

Partitioning Support [PARTITIONING_SUPPORT]: 0x03

Device support partitioning feature

Device can have enhanced tech.

Max Enhanced Area Size [MAX_ENH_SIZE_MULT]: 0x0000e6

Partitions attribute [PARTITIONS_ATTRIBUTE]: 0x00

Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00

General Purpose Partition Size

[GP_SIZE_MULT_4]: 0x000000

[GP_SIZE_MULT_3]: 0x000000

[GP_SIZE_MULT_2]: 0x000000

[GP_SIZE_MULT_1]: 0x000000

Enhanced User Data Area Size [ENH_SIZE_MULT]: 0x000000

Enhanced User Data Start Address [ENH_START_ADDR]: 0x000000

Bad Block Management mode [sEC_BAD_BLK_MGMNT]: 0x00

Writing file...C:\temp\EMMCZ\sboot.bin

Successefuly connected to box on COM7

Box S/N: **************, ,FW Ver.: 01.46

Loading eMMC Addon Firmware...

Init EMMC...

EMMC CID: 45010053454D3034470033B670513007

EMMC ID: 0x0045

EMMC NAME: SEM04G

EMMC CSD: D00F00320F5903FFFFFFFDFF924040C9

Writing 0008e594 bytes to 00000000 ...ROM2

Write Speed: 203 kB/s

Done !!!

Reading dump to file...C:\temp\EMMCZ\sboot_check.bin

Successefuly connected to box on COM7

Box S/N: **************, ,FW Ver.: 01.46

Loading eMMC Addon Firmware...

Init EMMC...

EMMC CID: 45010053454D3034470033B670513007

EMMC ID: 0x0045

EMMC NAME: SEM04G

EMMC CSD: D00F00320F5903FFFFFFFDFF924040C9

Reading 00100000 bytes from 00000000 ...ROM2

Read Speed: 242 kB/s

Done !!!

Discuss HERE

Clan GSM, the Best of Brazil Forum

http://forum.clangsm.com.br

GSM Hosting, the largest forum of the World

http://forum.gsmhosting.com

Union of the best and strongest.