RIFF JTAG - CDMA Haier C3010, LG LSP450T Repair supported

<div>22.04.2011 CDMA Haier C3010, LG LSP450T Repair supported

Resurrecting Haier C3010 is simple. Phone is auto powered on with USB Cable connected to the PC. Battery presence is not required; connection can be established with detached board.

Current resurrector contains Firmware and EEPROM zones for memory chips with IDs 0x00EC/0x257E and 0x017E/0×2210. Proper data will be selected automatically depending on memory ID in your device.

To resurrect Haier C3010:

• Solder JTAG cable to Haier C3010 JTAG pads;
• Insert USB Data cable into board and PC;
• Make sure Haier C3010 is selected in the list of models;
• Click Resurrect button;
• Choose which areas to flash;
• Wait till software signals a successful operation completion;
• De-solder JTAG wires;

Resurrecting LG LSP450T is simple. Phone is auto powered on with USB Cable connected to the PC. Battery presence is not required; connection can be established with detached board.

Current resurrector contains Firmware and EEPROM zones for memory chip with ID 0×0020/0×8867

To resurrect LG LSP450T:

• Solder JTAG cable to LG LSP450T JTAG pads;
• Insert USB Data cable into board and PC;
• Make sure LG LSP450T is selected in the list of models;
• Click Resurrect button;
• Choose which areas to flash;
• Wait till software signals a successful operation completion;
• De-solder JTAG wires;

Please click <b>

Clan GSM, the Best of Brazil Forum

http://forum.clangsm.com.br

GSM Hosting, the largest forum of the World

http://forum.gsmhosting.com

Union of the best and strongest.