Entre para seguir isso  
GSM international news


Posts Recomendados

21.03.2011 RoverPC EVO V7 Unbrick – Dead boot repair supported

RoverPC Evo V7 resurrection is simple. Phone is auto powered on with USB Data Cable connected to the PC. Battery presence is not required; connection can be established with detached board.

To resurrect RoverPC Evo V7:

  • Solder JTAG cable to RoverPC Evo V7 JTAG pads;
  • Connect USB cable to phone and PC;
  • Make sure RoverPC Evo V7 is selected in the list of models;
  • Make sure a fixed TCK frequency is selected;
  • Click Resurrect button;
  • Wait till software signals a successful operation completion;
  • Disconnect USB cable, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original firmware downloader software to restore it to the working state.

To enter download mode:

  • Disconnect PC cable;
  • Insert battery;
  • Hold both ‘Volume Down’ and ‘Camera’ keys and press Power-On.

21.03.2011 MARVELL PXA3XX NAND Generic DLL Released

  • Resurrector PXA3XX contains only NAND DCC Loader, thus it is to be used only for operations on DCC Read/Write page in the JTAG Manager.
Embedded DCC Loader is designed to work inside of MCU's internal RAM memory, thus it is not sensitive to external SDRAM configuration or availability or its physical state.

21.03.2011 - RIFF Box Firmware v1.21

Firmware 1.21


  • Added RX-polling feature (debugger-to-target) for PXA3XX DCC transfers.
RIFF BOX firmware is able now to wait (if resurrector DLL will request so) for PXA3XX target to be ready to accept

next packet over DCC: this feature slows down a little the JTAG-to-Target DCC

transfers but guaranties no packets loss for slow clocked targets;

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

Clan GSM, the Best of Brazil Forum


GSM Hosting, the largest forum of the World


Union of the best and strongest.

Compartilhar este post

Link para o post
Compartilhar em outros sites

Participe da conversa

Você pode postar agora e se cadastrar mais tarde. Se você tem uma conta, faça o login para postar com sua conta.
Note: Your post will require moderator approval before it will be visible.


×   Você colou conteúdo com formatação.   Remover formatação

  Apenas 75 emojis são permitidos.

×   Seu link foi automaticamente incorporado.   Mostrar como link

×   Seu conteúdo anterior foi restaurado.   Limpar o editor

×   Não é possível colar imagens diretamente. Carregar ou inserir imagens do URL.

Entre para seguir isso  

  • Quem Está Navegando   0 membros estão online

    Nenhum usuário registrado visualizando esta página.