RIFF JTAG - CDMA LG VM265, CDMA Huawei Broadband Modem EC1260 supported

[GSM international news]

<div><font color="#000000"><font face="Times New Roman"><font color="#EFEFEF"><font face="trebuchet ms">10.05.2011 CDMA LG VM265, CDMA Huawei Broadband Modem EC1260 supported

Resurrecting LG VM265 is easy. Phone is auto powered on with USB Data Cable connected to the PC. Battery presence is not required; connection can be established with detached board.

To resurrect LG VM265:

• Solder JTAG cable to LG VM265 JTAG pads;
• Insert USB Data cable into board and PC;
• Make sure LG VM265 is selected in the list of models;
• Click Resurrect button;
• Wait till software signals a successful operation completion;
• Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

Resurrecting Huawei EC1260 is simple. Just make sure you solder all JTAG signals and insert modem into a USB port for it to get powered.

If modem is not detected by RIFFBOX JTAG, disconnect JTAG connector, re-insert modem into USB and then connect back the JTAG connector.

At resurrection startup you can select which zones are to be re-flashed. Thus you can save a lot of time if you know approximately which zone is damaged. Select EFS or MMC areas to be flashed only in case you are sure those are damaged

Clan GSM, the Best of Brazil Forum

http://forum.clangsm.com.br

GSM Hosting, the largest forum of the World

http://forum.gsmhosting.com

Union of the best and strongest.