Ir para conteúdo

Procedimentos realizados com sucesso via Octopus/Octoplus box


Posts Recomendados

  • 1 mês depois...
  • 3 semanas depois...
  • 2 semanas depois...
  • 3 semanas depois...
  • 1 mês depois...

frp lg q6 100%

 

Welcome to Octoplus/Octopus Box LG Software version 2.7.8
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM1
Selected model: M700
Reading info...
Could not detect mode!
Performed by 2.7.8 Software version.
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM5
Selected model: M700
Reading info...
Model ID: LG-M700TV
IMEI: 358756-08-041361-5
Android version: 7.1.1
Battery level: 55%
SW Version: M70010j
Mode: Emergency
Initializing flash...OK
SW version: LGM700TVAT-00-V10r-724-06-AUG-28-2017-32G+0
Android version: 7.1.1
LAF Version: 1.1
Product ID: BR10S170816000621
IMEI: 358756-08-041361-5
Target operator: GLOBAL
Hardware: rev_10
Performed by 2.7.8 Software version.
To perform Reset FRP operation do the next:
1. Attach testpoint as shown on Figure in manual, and connect phone with 
Micro USB cable.
2. Check PC Device Manager, a new device should appear "Qualcomm HS-
USB QDLoader 9008".
3. Release testpoint.

Performed by 2.7.8 Software version.
To perform Reset FRP operation do the next:
1. Attach testpoint as shown on Figure in manual, and connect phone with 
Micro USB cable.
2. Check PC Device Manager, a new device should appear "Qualcomm HS-
USB QDLoader 9008".
3. Release testpoint.

Cannot terminate an externally created thread
Performed by 2.7.8 Software version.
To perform Reset FRP operation do the next:
1. Attach testpoint as shown on Figure in manual, and connect phone with 
Micro USB cable.
2. Check PC Device Manager, a new device should appear "Qualcomm HS-
USB QDLoader 9008".
3. Release testpoint.

Found port COM15
Connecting...OK
Sending loader...OK
Reconnecting phone...OK
Checking request...OK
Reading partitions...OK
Searching signatures...
Resetting FRP Lock...
Rebooting phone...
Performed by 2.7.8 Software version.
 

LG_M700_TP.png

Editado por Bruno Santana
Link para o comentário
Compartilhar em outros sites

  • 2 semanas depois...
  • 1 mês depois...

Welcome to Octoplus FRP Tool v.1.1.2


Platform: ASUS
Selected model: ZC520TL (X008)
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM24
Detecting Chip Version...
HW Chip: MT6735: 0335.0000
HW Version: 8A00.CB00.0000.0000
Connecting...
Brom Version: 05
BootLoader Version: FE
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2017-09-06.13:15_388644, n.10
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .90014A48.41473461.32A43366.AC7F1F13
eMMC Flash: Hynix: HAG4a2
DA ver: 4.2.9B
Initializing Memory Flash..
Sending BootLoader Info...
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 15028 Mb
Internal RAM size: 128 Kb
External RAM size: 2048 Mb
Reading partition...
Reading info...
Brand: asus
Model: ASUS_X008DB
Device: ASUS_X008_1
Platform: mt6737m
Android version: 7.0
Display ID: NRD90M.TW_Phone-14.12.1707.48-20170725
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as ASUS_ZC520TL (X008)_06-02-2018_10-11-33.dump file
Performed by 1.1.2 Software version.

octoplus.JPG

Link para o comentário
Compartilhar em outros sites

LG D227 flash convertida e completada usando modelo D125G

 

06/02/2018 13:08:56 > Checking data...06/02/2018 13:08:57 > OK
06/02/2018 13:08:57 > Platform: LG MTK
06/02/2018 13:08:57 > Selected port: COM1
06/02/2018 13:08:57 > Selected baudrate: 921600
06/02/2018 13:08:57 > Selected model: D125G
06/02/2018 13:08:57 > Selected USB connection type
06/02/2018 13:08:58 > Please, disconnect battery and connect cable...06/02/2018 13:09:30 > OK
06/02/2018 13:09:30 > Phone found.
06/02/2018 13:09:30 > CPU name: MT6572
06/02/2018 13:09:30 > CPU revision: 8A00.CA01.0000.0000
06/02/2018 13:09:30 > Prepairing loader...06/02/2018 13:09:30 > OK
06/02/2018 13:09:30 > Sending loader...06/02/2018 13:09:30 > OK
06/02/2018 13:09:32 > Synchronizing with loader...
06/02/2018 13:09:32 > Detecting flash chip...06/02/2018 13:09:32 > OK
06/02/2018 13:09:32 > Detecting EMMC flash chip...06/02/2018 13:09:32 > OK
06/02/2018 13:09:32 > Reading info...06/02/2018 13:09:33 > OK
06/02/2018 13:09:33 > Checking security...
06/02/2018 13:09:36 > Checking security passed!
06/02/2018 13:09:36 > --------------------------------------------------------------------------------
06/02/2018 13:09:36 > IMEI A: 357411-06-00xxxxx
06/02/2018 13:09:36 > IMEI B: 357411-06-00xxxxx
06/02/2018 13:09:36 > Bluetooth address: 34:FC:EF:40:27:AC
06/02/2018 13:09:36 > Wi-Fi MAC address: 34:FC:EF:F8:61:68
06/02/2018 13:09:37 > EMMC rpmb size: 0 Mb
06/02/2018 13:09:37 > EMMC boot1 size: 4 Mb
06/02/2018 13:09:37 > EMMC boot2 size: 4 Mb
06/02/2018 13:09:37 > EMMC gp1 size: 0 Mb
06/02/2018 13:09:37 > EMMC gp2 size: 0 Mb
06/02/2018 13:09:37 > EMMC gp3 size: 0 Mb
06/02/2018 13:09:37 > EMMC gp4 size: 0 Mb
06/02/2018 13:09:37 > EMMC user area size: 3728 Mb
06/02/2018 13:09:37 > --------------------------------------------------------------------------------
06/02/2018 13:09:37 > Opening "D22710G_00.oct"...
06/02/2018 13:09:37 > Writing Firmware...
06/02/2018 13:09:37 > Reading partitions...06/02/2018 13:09:37 > OK
06/02/2018 13:09:37 > Prepairing firmware...06/02/2018 13:09:41 > OK
06/02/2018 13:09:41 > Writing Bootloader...06/02/2018 13:09:47 > OK
06/02/2018 13:09:47 > Reading partitions...06/02/2018 13:09:47 > OK
06/02/2018 13:09:47 > Writing partition table...06/02/2018 13:09:47 > OK
06/02/2018 13:09:47 > Writing 1/41 MBR...06/02/2018 13:09:47 > OK
06/02/2018 13:09:47 > Writing 2/41 EBR1...06/02/2018 13:09:47 > OK
06/02/2018 13:09:47 > Writing 3/41 _EXT_PL...06/02/2018 13:09:48 > OK
06/02/2018 13:09:48 > Writing 4/41 UBOOT...06/02/2018 13:09:48 > OK
06/02/2018 13:09:48 > Writing 5/41 BOOTIMG...06/02/2018 13:09:51 > OK
06/02/2018 13:09:51 > Writing 6/41 RECOVERY...06/02/2018 13:09:55 > OK
06/02/2018 13:09:55 > Writing 7/41 SEC_RO...06/02/2018 13:09:55 > OK
06/02/2018 13:09:55 > Writing 8/41 LOGO...06/02/2018 13:09:56 > OK
06/02/2018 13:09:56 > Writing 9/41 EBR2...06/02/2018 13:09:56 > OK
06/02/2018 13:09:56 > Writing 10/41 EBR3...06/02/2018 13:09:56 > OK
06/02/2018 13:09:56 > Writing 11/41 PERSIST...06/02/2018 13:09:59 > OK
06/02/2018 13:09:59 > Writing 12/41 CUST...06/02/2018 13:10:03 > OK
06/02/2018 13:10:03 > Writing 13/41 FACTORY...06/02/2018 13:10:07 > OK
06/02/2018 13:10:07 > Writing 14/41 ANDROID...06/02/2018 13:11:11 > OK
06/02/2018 13:11:11 > Writing 15/41 ANDROID...06/02/2018 13:12:17 > OK
06/02/2018 13:12:17 > Writing 16/41 ANDROID...06/02/2018 13:13:23 > OK
06/02/2018 13:13:23 > Writing 17/41 ANDROID...06/02/2018 13:14:28 > OK
06/02/2018 13:14:28 > Writing 18/41 ANDROID...06/02/2018 13:15:32 > OK
06/02/2018 13:15:32 > Writing 19/41 ANDROID...06/02/2018 13:16:35 > OK
06/02/2018 13:16:35 > Writing 20/41 ANDROID...06/02/2018 13:17:37 > OK
06/02/2018 13:17:37 > Writing 21/41 ANDROID...06/02/2018 13:18:40 > OK
06/02/2018 13:18:40 > Writing 22/41 ANDROID...06/02/2018 13:19:40 > OK
06/02/2018 13:19:40 > Writing 23/41 ANDROID...06/02/2018 13:20:40 > OK
06/02/2018 13:20:40 > Writing 24/41 ANDROID...06/02/2018 13:21:38 > OK
06/02/2018 13:21:38 > Writing 25/41 ANDROID...06/02/2018 13:21:39 > OK
06/02/2018 13:21:39 > Writing 26/41 CACHE...06/02/2018 13:21:42 > OK
06/02/2018 13:21:42 > Writing 27/41 CACHE...06/02/2018 13:21:42 > OK
06/02/2018 13:21:42 > Writing 28/41 CACHE...06/02/2018 13:21:43 > OK
06/02/2018 13:21:43 > Writing 29/41 USRDATA...06/02/2018 13:21:57 > OK
06/02/2018 13:21:57 > Writing 30/41 USRDATA...06/02/2018 13:21:57 > OK
06/02/2018 13:21:57 > Writing 31/41 USRDATA...06/02/2018 13:21:57 > OK
06/02/2018 13:21:57 > Writing 32/41 USRDATA...06/02/2018 13:21:58 > OK
06/02/2018 13:21:58 > Writing 33/41 USRDATA...06/02/2018 13:21:58 > OK
06/02/2018 13:21:58 > Writing 34/41 USRDATA...06/02/2018 13:21:58 > OK
06/02/2018 13:21:58 > Writing 35/41 USRDATA...06/02/2018 13:21:59 > OK
06/02/2018 13:21:59 > Writing 36/41 USRDATA...06/02/2018 13:21:59 > OK
06/02/2018 13:21:59 > Writing 37/41 USRDATA...06/02/2018 13:21:59 > OK
06/02/2018 13:21:59 > Writing 38/41 USRDATA...06/02/2018 13:21:59 > OK
06/02/2018 13:21:59 > Writing 39/41 USRDATA...06/02/2018 13:22:00 > OK
06/02/2018 13:22:00 > Writing 40/41 USRDATA...06/02/2018 13:22:00 > OK
06/02/2018 13:22:00 > Writing 41/41 USRDATA...06/02/2018 13:22:00 > OK
06/02/2018 13:22:00 > Finalizing...06/02/2018 13:22:01 > OK
06/02/2018 13:22:01 > Writing partition table...06/02/2018 13:22:01 > OK
06/02/2018 13:22:01 > Writing firmware done!
06/02/2018 13:22:01 > Performed by 2.7.9 Software version.

Link para o comentário
Compartilhar em outros sites

  • 2 semanas depois...
  • 4 semanas depois...
  • 3 semanas depois...
  • 2 semanas depois...
  • 2 semanas depois...

Remoção de frp do ASUS ZC520TL
 

Selected DA: MTK_AllInOne_DA_v3.3001.2017-09-06.13:15_388644, n.10
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .90014A48.41473461.32A42128.ECCB3275
eMMC Flash: Hynix: HAG4a2
DA ver: 4.2.9B
Initializing Memory Flash..
Sending BootLoader Info...
Initialization successfully completed
Sending loaders...
Operation was failed!
Performed by 1.2.5.0 Software version.

Platform: ASUS
Selected model: ZC520TL (X008DB)
Please, power phone OFF, press and hold "Vol-" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM123
Detecting Chip Version...
HW Chip: MT6737T: 0321.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: 05
BootLoader Version: FE
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2017-09-06.13:15_388644, n.10
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .90014A48.41473461.32A42128.ECCB3275
eMMC Flash: Hynix: HAG4a2
DA ver: 4.2.9B
Initializing Memory Flash..
Sending BootLoader Info...
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 15028 Mb
Internal RAM size: 128 Kb
External RAM size: 2048 Mb
Reading partition...
Reading info...
Brand: asus
Model: ASUS_X008DB
Device: ASUS_X008
Platform: mt6737t
Android version: 7.0
Display ID: NRD90M.TW_Phone-14.03.1801.96-20180125
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as ASUS_ZC520TL (X008DB)_09-05-2018_17-12-55.dump file
Performed by 1.2.5.0 Software version5af3971048aa8_Semttulo.thumb.png.81b07cae0fe6d5ff829c8a96568e5a06.png

Link para o comentário
Compartilhar em outros sites

  • 3 meses depois...
  • 3 meses depois...

LG K9 X210bmw frp done :1_grinning:  

 

Welcome to Octoplus/Octopus Box LG Software version 2.9.0
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM1
Selected model: X210S
Please, put the phone into download mode manually (Power phone OFF 
(reconnect battery), press and hold "Vol+" button and connect the cable 
(or P999 cable)).
Reading info...
Could not detect mode!
Performed by 2.9.0 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM21
Selected model: X210S
Please, put the phone into download mode manually (Power phone OFF 
(reconnect battery), press and hold "Vol+" button and connect the cable 
(or P999 cable)).
Reading info...
Model ID: LM-X210BMWX21011s
IMEI: 3531
Android version: 
Battery level: 32%
SW Version: X21011s
Mode: Emergency
Initializing flash...OK
Platform: msm8909
SW version: LMX210BMWAT-00-V10a-724-05-OCT-15-2018+4
Android version: 7.1.2
LAF Version: 1.1
Product ID: 
IMEI: 35
Target operator: LAO
Hardware: rev_10
Reset FRP operation for X210S will delete all user data on the phone 
(contacts, pictures and others)! 
Do You want to continue?
Reading partitions...OK
Detecting writing method...
Trying third method...OK
Resetting FRP Lock...OK
Formating encrypt...OK
Rebooting phone...
Resetting FRP lock successfully completed!
To complete the operation, please make Factory Reset (Go to "Settings" -> 
"General" -> "Backup & reset" -> "Factory data reset", press "Reset 
phone" and "Erase everything" buttons).
Performed by 2.9.0 Software version.
 

Editado por Breno Rodrigues
Link para o comentário
Compartilhar em outros sites

Em 01/12/2018 em 10:29, Breno Rodrigues disse:

LG K9 X210bmw frp done :1_grinning:  

 

Welcome to Octoplus/Octopus Box LG Software version 2.9.0
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM1
Selected model: X210S
Please, put the phone into download mode manually (Power phone OFF 
(reconnect battery), press and hold "Vol+" button and connect the cable 
(or P999 cable)).
Reading info...
Could not detect mode!
Performed by 2.9.0 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM21
Selected model: X210S
Please, put the phone into download mode manually (Power phone OFF 
(reconnect battery), press and hold "Vol+" button and connect the cable 
(or P999 cable)).
Reading info...
Model ID: LM-X210BMWX21011s
IMEI: 3531
Android version: 
Battery level: 32%
SW Version: X21011s
Mode: Emergency
Initializing flash...OK
Platform: msm8909
SW version: LMX210BMWAT-00-V10a-724-05-OCT-15-2018+4
Android version: 7.1.2
LAF Version: 1.1
Product ID: 
IMEI: 35
Target operator: LAO
Hardware: rev_10
Reset FRP operation for X210S will delete all user data on the phone 
(contacts, pictures and others)! 
Do You want to continue?
Reading partitions...OK
Detecting writing method...
Trying third method...OK
Resetting FRP Lock...OK
Formating encrypt...OK
Rebooting phone...
Resetting FRP lock successfully completed!
To complete the operation, please make Factory Reset (Go to "Settings" -> 
"General" -> "Backup & reset" -> "Factory data reset", press "Reset 
phone" and "Erase everything" buttons).
Performed by 2.9.0 Software version.
 

bom em Breno nesta versão já foi direto 

Link para o comentário
Compartilhar em outros sites

  • 4 semanas depois...

Participe da conversa

Você pode postar agora e se cadastrar mais tarde. Se você tem uma conta, faça o login para postar com sua conta.
Nota: Sua postagem exigirá aprovação do moderador antes de ficar visível.

Visitante
Responder

×   Você colou conteúdo com formatação.   Remover formatação

  Apenas 75 emojis são permitidos.

×   Seu link foi automaticamente incorporado.   Mostrar como link

×   Seu conteúdo anterior foi restaurado.   Limpar o editor

×   Não é possível colar imagens diretamente. Carregar ou inserir imagens do URL.


Chimera team images


×
×
  • Criar Novo...