Ir para conteúdo

Procedimentos realizados com Sucesso com UMT !!!


Posts Recomendados

MOTOROLA ONE ANDROID 9

 

Port    : Fastboot Inteface
Baud Rate    : Not Applicable
Device    : Motorola
Operation    : New FRP Reset
Searching for Device in FastBoot Mode... OK
Reading Phone Information...
Model    : XT1941-3
Boot Ver.    : MBM-2.1-deen_retail-65423a4-181106
Baseband    : <not found>
Software    : Blur_Version.29.21.11.deen.retail.en.US
IMEI    : 359521091595472
CPU    : MSM8953
RAM    : 4GB SAMSUNG LP3 DIE=8Gb M5=01 M6=06 M7=00 M8=5F
EMMC    : 64GB SAMSUNG RH64AB RV=08 PV=05 FV=0000000000000005
Setting Factory Mode... OK
Searching Network Interface... Found
Connecting to device... OK
Model    : motorola one
Bootloader    : 0xC40A
Baseband    : <Read failed>
Build    : Blur_Version.29.21.11.deen.retail.en.US
Android    : 9
Searching Network Interface... Found
Connecting to device... OK
Model    : motorola one
Bootloader    : 0xC40A
Baseband    : M8953_15.11.02.17R DEEN_LATAMDSDS_CUST
Build    : Blur_Version.29.21.11.deen.retail.en.US
Android    : 9
Resetting FRP... OK
Searching for Device in FastBoot Mode... OK
Removing Factory Mode... OK
Operation Finished.
Elapsed Time: 04:33
[Module Ver. 5.2]
Log Saved to Logs\190130_101120.log

 

 

image.thumb.png.ab06b75e6a230ace4c5576c2a28e0ab7.png

Link para o comentário
Compartilhar em outros sites

  • 3 semanas depois...
Em 28/09/2018 em 17:07, Reginaldo almeida disse:

Mi phone 
MI 6
Android 8.0.0
patch de segurança 01/05/2018
versão do MIUI global 9.5 estável 9.5.8.0 ( OCAMIFA ) 
numero de modelo MCE16
IMG do TP ( test point ) 
 

mi6.jpg

WhatsApp Image 2018-09-28 at 17.06.00.jpeg

amigo Reginaldo. após esse procedimento é possível colocar outra conta no mi account??

Link para o comentário
Compartilhar em outros sites

FLASH XT1078 - Moto G2 4G

 

Port    : Fastboot Interface
Baud Rate    : Not Applicable
Device    : Motorola QC
Operation    : Flash
Fw Model    : thea_retbr_ds
Fw Version    : thea_retbr_ds-user 6.0 MPBS24.65-34-5 7 release-keysM8926_309101.02.03.19R
Searching for Device in FastBoot Mode... OK
Reading Phone Information...
Model    : XT1078
Boot Ver.    : 4822
Baseband    : M8926_309101.02.03.19R THEA_LATAM_DSDS_CUST
Software    : Blur_Version.24.201.5.thea_retbr_ds.retbr.en.BR
IMEI    : ****************
CPU    : MSM8926
RAM    : 1024MB Elpida S4 SDRAM DIE=4Gb
EMMC    : 16GB ID=15 REV=07 PRV=01 TYPE=57
Sending Data [partition]... Done
Sending Data [motoboot]... Done
Sending Data [logo]... Done
Sending Data [boot]... Done
Sending Data [recovery]... Done
Sending Data [system]... Done
Sending Data [system]... Done
Sending Data [system]... Done
Sending Data [system]... Done
Sending Data [system]... Done
Sending Data [modem]... Done
Erasing [modemst1]... Done
Erasing [modemst2]... Done
Sending Data [fsg]... Done
Erasing [cache]... Done
Erasing [userdata]... Done
Operation Finished.
Elapsed Time: 01:44
[Module Ver. 5.2]

bootmtg2.png

Link para o comentário
Compartilhar em outros sites

  • 2 semanas depois...

Reset Mi Account Mi 8 Lite 

 

Operation    : Reset Mi Account
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM64)
Driver Info    : Network Connect, qcusbser.sys, 3.0.0.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID    : E1C00800 [8996] 00000000
OPK_DATA    : F7337FE47B192EF4D1BA34CB4E879F0C6B771D06D2DE87BF21F65BA3303834E1
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8996_022]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : MSM8996, eMMC, 64 GB
LU Count    : 1 [0x0747C000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 131072, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device    : Xiaomi MI 8 Lite
Software    : OPM1.171019.019, V10.2.2.0.ODTMIXM [Tue Jan 15 10:53:40 WIB 2019]
Android Ver.    : 8.1.0
Patch Level    : 2018-12-01
Resetting Mi Account Data...Done
Preparing Data...Done
Formatting Userdata...Done
When phone is completely ON, connect to Internet and add Mi Account.
-------------- INFORMATION --------------
New Firmware may cause hang on logo.
In such case, you need to flash phone to recover.
Or downgrade firmware and try Reset Mi Account again.
Operation Finished.
QcFire Ver. 3.9

Link para o comentário
Compartilhar em outros sites

Anti relock mi note 4 

 

Operation    : Mi Anti Relock
Checking for device in ADB mode...Found!
Searching for Device...Found
Brand    : Xiaomi
Model    : Redmi Note 4
Product    : nikel
Device    : nikel
Andriod Ver.    : 6.0
Patch Level    : 2016-09-05
Bootloader    : unknown
Build ID    : MRA58K
Build Date    : Tue Oct 18 16:45:14 CST 2016
Disabling Mi Account Relock...Verified OK... Done
Operation Finished.
QcFire Ver. 3.8

Link para o comentário
Compartilhar em outros sites

  • 3 semanas depois...

Reset FRP ZC554KL  DONE 

 

Operation    : Reset FRP
Checking for existing devices...Found
Port    : Qualcomm HS-USB QDLoader 9008 (COM31)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID    : E1F00400 [8937] 00000000
OPK_DATA    : 195B400B367642F4CF4C418D86A4E5DF32466A4DD10562790AEF7CEE900E2B8E
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_014]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : 8937, eMMC, 32 GB
LU Count    : 1 [0x03A3E000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device    : asus ASUS_X00ID [msm8937]
Software    : NMF26F.WW_Phone-14.2016.1805.235-20180521, WW_Phone-14.2016.1805.235-20180521 [Mon May 21 15:53:48 CST 2018]
Android Ver.    : 7.1.1
Patch Level    : 2018-05-01
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 3.8

Link para o comentário
Compartilhar em outros sites

Device    : Xiaomi Redmi Note 5

Operation    : Reset Mi Account

 

 

 

Operation    : Reset Mi Account
Checking for existing devices...Found
Port    : Qualcomm HS-USB QDLoader 9008 (COM26)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID    : E1C00C00 [8996] 00000000
OPK_DATA    : F7337FE47B192EF4D1BA34CB4E879F0C6B771D06D2DE87BF21F65BA3303834E1
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8996_016]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : MSM8996, eMMC, 32 GB
LU Count    : 1 [0x03A3E000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 131072, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device    : Xiaomi Redmi Note 5
Software    : OPM1.171019.011, V10.2.2.0.OEIMIXM [Thu Mar 14 14:52:10 WIB 2019]
Android Ver.    : 8.1.0
Patch Level    : 2019-03-01
Resetting Mi Account Data...Done
Preparing Data...Done
Formatting Userdata...Done
When phone is completely ON, connect to Internet and add Mi Account.
-------------- INFORMATION --------------
New Firmware may cause hang on logo.
In such case, you need to flash phone to recover.
Or downgrade firmware and try Reset Mi Account again.
Operation Finished.
QcFire Ver. 4.1

Link para o comentário
Compartilhar em outros sites

Operation    : Reset FRP

Device    : Xiaomi Redmi Note 5

 

 

Operation    : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM26)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...Ignored
Init Handshake Sequence...OK
Hardware ID    : E1C00C00 [8996] 00000000
OPK_DATA    : F7337FE47B192EF4D1BA34CB4E879F0C6B771D06D2DE87BF21F65BA3303834E1
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8996_016]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : MSM8996, eMMC, 32 GB
LU Count    : 1 [0x03A3E000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 131072, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device    : Xiaomi Redmi Note 5
Software    : OPM1.171019.011, V10.2.2.0.OEIMIXM [Thu Mar 14 14:52:10 WIB 2019]
Android Ver.    : 8.1.0
Patch Level    : 2019-03-01
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 4.1

Link para o comentário
Compartilhar em outros sites

Device    : Xiaomi Redmi Note 5

Operation    : Mi Anti Relock

 

 

 

 

 

Operation    : Mi Anti Relock
Checking for device in ADB mode...Found!
Searching for Device...Found
Brand    : xiaomi
Model    : Redmi Note 5
Product    : whyred
Device    : whyred
Andriod Ver.    : 8.1.0
Patch Level    : 2019-03-01
Bootloader    : unknown
Build ID    : OPM1.171019.011
Build Date    : Thu Mar 14 14:52:10 WIB 2019
Disabling Mi Account Relock...Verified OK... Done
Operation Finished.
QcFire Ver. 4.1

Link para o comentário
Compartilhar em outros sites

1 hora atrás, concistech disse:

tentei no J710MN esse procedimento mas esta dand o seguinte erro:
Checking for Device... Found [Download Mode]
Reading Data from Phone... Done
Chipset: LSI7870 [HiSpeed]
Resetting FRP Lock Data... . Done
Closing Session... Binary Rejected!
Failed to reset FRP.!
Possibly unsupported firmware, flash phone and try agaiin

 

ja reinstalei a Rom atualizada, mesmo assim não resolveu....

 

oq pode ser?

Boa noite amigo , exato vai dar erro com este e qualquer outro aparelho que estejam atualizados ( Android ou patch de segurança ) 
A forma dos desbloqueio mudam constantemente ...

OBS :  Sempre olhe o Bin em que seu aparelho se encontra e poe no clansoft ( Tem Novidades diárias lá )

ex https://www.clansoft.net/dl/index.php?a=downloads&b=search&in=&keyword=710mn

Lembrando que sempre faça sua busca com modelo exato ai como no seu caso ( J710MN ) e terá sempre as novidades em mãos ...

https://www.clansoft.net/dl/  sempre atualizando o banco de dados com novidades possíveis no mercado .

Editado por Reginaldo almeida
Link para o comentário
Compartilhar em outros sites

  • 2 semanas depois...

ANTI-RELOCK Redmi note 5 

 

Operation    : Mi Anti Relock
Checking for device in ADB mode...Found!
Searching for Device...Found
Brand    : xiaomi
Model    : Redmi Note 5
Product    : whyred
Device    : whyred
Andriod Ver.    : 8.1.0
Patch Level    : 2019-03-01
Bootloader    : unknown
Build ID    : OPM1.171019.011
Build Date    : Thu Mar 14 14:52:10 WIB 2019
Disabling Mi Account Relock...Verified OK... Done
Operation Finished.
QcFire Ver. 4.0

Link para o comentário
Compartilhar em outros sites

Participe da conversa

Você pode postar agora e se cadastrar mais tarde. Se você tem uma conta, faça o login para postar com sua conta.
Nota: Sua postagem exigirá aprovação do moderador antes de ficar visível.

Visitante
Responder

×   Você colou conteúdo com formatação.   Remover formatação

  Apenas 75 emojis são permitidos.

×   Seu link foi automaticamente incorporado.   Mostrar como link

×   Seu conteúdo anterior foi restaurado.   Limpar o editor

×   Não é possível colar imagens diretamente. Carregar ou inserir imagens do URL.


Chimera team images


×
×
  • Criar Novo...