Ir para conteúdo

Procedimentos realizados com Sucesso com UMT !!!


Posts Recomendados

FRP MOTO X4 XT1900

 

Port    : Fastboot Inteface
Baud Rate    : Not Applicable
Device    : Motorola
Operation    : New FRP Reset
Searching for Device in FastBoot Mode... OK
Reading Phone Information...
Model    : XT1900-6
Boot Ver.    : MBM-3.0-uefi-2d29a27-180407
Baseband    : M660_7042.27.01.73R PAYTON_LATAMDSDS_CUST
Software    : Blur_Version.29.11.36.payton.retail.en.US
IMEI    : 359552082768935
CPU    : SDM630 1.0 (6)
RAM    : 3GB SAMSUNG LP4x DIE=12Gb M5=01 M6=06 M7=00 M8=0E
EMMC    : 32GB SAMSUNG DD68MB RV=08 PV=02 FV=0000000000000002
Setting Factory Mode... OK
Searching Network Interface... Found
Connecting to device... OK
Model    : moto x4
Bootloader    : MBM-3.0-uefi-2d29a27-180407
Baseband    : M660_7042.27.01.73R PAYTON_LATAMDSDS_CUST
Build    : Blur_Version.29.11.36.payton.retail.en.US
Android    : 9
Searching Network Interface... Found
Connecting to device... OK
Model    : moto x4
Bootloader    : MBM-3.0-uefi-2d29a27-180407
Baseband    : M660_7042.27.01.73R PAYTON_LATAMDSDS_CUST
Build    : Blur_Version.29.11.36.payton.retail.en.US
Android    : 9
Resetting FRP... OK
Searching for Device in FastBoot Mode... OK
Removing Factory Mode... OK
Operation Finished.
Elapsed Time: 02:26
[Module Ver. 5.2]
Log Saved to Logs\181227_141157.log

FRP moto x4.jpg

Link para o comentário
Compartilhar em outros sites

FRP Moto Z3-PLAY android 8.1

 

Port    : Fastboot Inteface
Baud Rate    : Not Applicable
Device    : Motorola
Operation    : New FRP Reset
Searching for Device in FastBoot Mode... OK
Reading Phone Information...
Model    : XT1929-5
Boot Ver.    : MBM-3.0-uefi-3f845b6-181030
Baseband    : M636_13.25.01.72R BECKHAM_BRAZILDSDS_CUST
Software    : Blur_Version.28.221.6.beckham.retail.en.US
IMEI    : 354106093156179
CPU    : SDM636 1.0 (1)
RAM    : 4GB SAMSUNG LP4x DIE=16Gb M5=01 M6=06 M7=10 M8=12
EMMC    : 64GB SAMSUNG DH6DMB RV=08 PV=05 FV=0000000000000005
Setting Factory Mode... OK
Searching Network Interface... Found
Connecting to device... OK
Model    : Moto Z3 Play
Bootloader    : MBM-3.0-uefi-3f845b6-181030
Baseband    : M636_13.25.01.72R BECKHAM_BRAZILDSDS_CUST
Build    : Blur_Version.28.221.6.beckham.retail.en.US
Android    : 8.1.0
Searching Network Interface... Found
Connecting to device... OK
Model    : Moto Z3 Play
Bootloader    : MBM-3.0-uefi-3f845b6-181030
Baseband    : M636_13.25.01.72R BECKHAM_BRAZILDSDS_CUST
Build    : Blur_Version.28.221.6.beckham.retail.en.US
Android    : 8.1.0
Resetting FRP... OK
Searching for Device in FastBoot Mode... OK
Removing Factory Mode... OK
Operation Finished.
Elapsed Time: 01:41
[Module Ver. 5.2]
Log Saved to Logs\190103_113801.log

Link para o comentário
Compartilhar em outros sites

Redmi 4 mi account remove

 

Operation    : Reset Mi Account
Checking for existing devices...Found
Port    : Qualcomm HS-USB QDLoader 9008 (COM10)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.0.5
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID    : E1600400 [8953] 00000000
OPK_DATA    : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : 8953, eMMC, 32 GB
LU Count    : 1 [0x03A3E000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device    : Xiaomi Redmi 4 [msm8953]
Software    : MMB29M, V9.5.3.0.MBEMIFA [Fri Apr  6 00:47:17 CST 2018]
Android Ver.    : 6.0.1
Patch Level    : 2018-03-01
Resetting Mi Account Data...Done
Preparing Data...Done
Formatting Userdata...Done
When phone is completely ON, connect to Internet and add Mi Account.
-------------- INFORMATION --------------
New Firmware may cause hang on logo.
In such case, you need to flash phone to recover.
Or downgrade firmware and try Reset Mi Account again.
Operation Finished.
QcFire Ver. 3.5

 

OK após conectar wifi 

Link para o comentário
Compartilhar em outros sites

FRP ZD553kl 8.1 100%

 

Operation    : Reset FRP
Checking for existing devices...Found
Port    : Qualcomm HS-USB QDLoader 9008 (COM10)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.0.5
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID    : E1F00400 [8937] 39A21620
OPK_DATA    : FDB379775FEB07C551EFBC01F78CD6ABAC99A2829E6F63768E4491B32485B6E5
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_015]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : 8937, eMMC, 64 GB
LU Count    : 1 [0x0747C000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device    : asus ASUS_X00LD [msm8937]
Software    : OPM1.171019.011.WW_Phone-15.0400.1809.405-0, 15.0400.1809.405-0 [Thu Sep 27 00:22:52 CST 2018]
Android Ver.    : 8.1.0
Patch Level    : 2018-09-05
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 3.5

Link para o comentário
Compartilhar em outros sites

Redmi 5A reset mi account

 

Operation    : Reset Mi Account
Checking for existing devices...Found
Port    : Qualcomm HS-USB QDLoader 9008 (COM3)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.2.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID    : E1600500 [8917] 00000000
OPK_DATA    : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8917]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : 8917, eMMC, 16 GB
LU Count    : 1 [0x01D1F000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device    : Xiaomi Redmi 5A [msm8937]
Software    : N2G47H, V9.2.4.0.NCKMIEK [Wed Feb  7 14:03:36 WIB 2018]
Android Ver.    : 7.1.2
Patch Level    : 2018-01-01
Resetting Mi Account Data...Done
Preparing Data...Done
Formatting Userdata...Done
When phone is completely ON, connect to Internet and add Mi Account.
-------------- INFORMATION --------------
New Firmware may cause hang on logo.
In such case, you need to flash phone to recover.
Or downgrade firmware and try Reset Mi Account again.
Operation Finished.
QcFire Ver. 3.2

Link para o comentário
Compartilhar em outros sites

frp reset lenovo vibe k6 k53b36 7.0

Operation    : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM25)
Driver Info    : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID    : E1F00400 [8937] 00000000
OPK_DATA    : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [3]
Device may possibly not boot with this loader.
Preparing Loader...Done
Sending Loader [8937]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : 8937, eMMC, 32 GB
LU Count    : 1 [0x03A3E000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device    : LENOVO Lenovo K53 [msm8937]
Software    : K53_S225_170811_ROW, K53_S225_170811_ROW [2017å¹´ 08月 11æ—¥ 星期五 17:12:28 CST]
Android Ver.    : 7.0
Patch Level    : 2017-07-01
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 3.5

Link para o comentário
Compartilhar em outros sites

  • 2 semanas depois...

Participe da conversa

Você pode postar agora e se cadastrar mais tarde. Se você tem uma conta, faça o login para postar com sua conta.
Nota: Sua postagem exigirá aprovação do moderador antes de ficar visível.

Visitante
Responder

×   Você colou conteúdo com formatação.   Remover formatação

  Apenas 75 emojis são permitidos.

×   Seu link foi automaticamente incorporado.   Mostrar como link

×   Seu conteúdo anterior foi restaurado.   Limpar o editor

×   Não é possível colar imagens diretamente. Carregar ou inserir imagens do URL.


Chimera team images


×
×
  • Criar Novo...