Ir para conteúdo

kp 265 dando erro ao passar flash


Posts Recomendados

me ajudem quem puder fui passar e fica assim:LG 2-3G Tool v.2.1.8 supported models: 386 Selected model: KP265 Selected port: COM1 Selected speed: 115200 Please press and hold power button! Stop by user! Selected model: KP265 Selected port: COM1 Selected speed: 115200 Please press and hold power button! Stop by user! Selected model: KP265 Selected port: COM4 Selected speed: 115200 Please press and hold power button! Phone detected! Loader startup Ok.. Reading phone info... Flash ID: 000000 Flash type: 000000 Flash size: 0Mb Start write firmware... Start write part #1... Error write block: 0x 01010000 Phone disconnected For operation finishing do next: - press "Disconnect" and power phone ON without SIM - press 2945#*# for entering eng. mode - select "Factory Reset" Elapsed: 30 secs. --> (v.2.1.8) Selected model: KP265 Selected port: COM4 Selected speed: 115200 Please press and hold power button! Phone detected! Loader startup Ok.. Reading phone info... Flash ID: 000000 Flash type: 000000 Flash size: 0Mb Phone disconnected Selected model: KP265 Selected port: COM4 Selected speed: 115200 Please press and hold power button! Phone detected! Loader startup Ok.. Reading phone info... Flash ID: 000000 Flash type: 000000 Flash size: 0Mb Cancel by user. Elapsed: 2 secs. --> (v.2.1.8) Read eeprom... Error read block 0x4F80000 Phone disconnected Elapsed: 24 secs. --> (v.2.1.8) Selected model: KP265 Selected port: COM4 Selected speed: 115200 Please press and hold power button! Bad answer! Selected model: KP265 Selected port: COM4 Selected speed: 921600 Please press and hold power button! Phone detected! Loader startup Ok.. Reading phone info... Flash ID: 000000 Flash type: 000000 Flash size: 0Mb Error change baud rate! Start write firmware... Start write part #1... Error write block: 0x 01010000 Phone disconnected For operation finishing do next: - press "Disconnect" and power phone ON without SIM - press 2945#*# for entering eng. mode - select "Factory Reset" Elapsed: 25 secs. --> (v.2.1.8) Selected model: KP265 Selected port: COM4 Selected speed: 921600 Please press and hold power button! Phone detected! Loader startup Ok.. Reading phone info... Flash ID: 000000 Flash type: 000000 Flash size: 0Mb Error change baud rate! Start read data... Error read block 0x1000000 Phone disconnected

Link para o comentário
Compartilhar em outros sites

  • 2 meses depois...

ai mano eu to cm o mesmo problema se eu resover eu te digo

me ajudem quem puder fui passar e fica assim:LG 2-3G Tool v.2.1.8

supported models: 386

Selected model: KP265

Selected port: COM1

Selected speed: 115200

Please press and hold power button!

Stop by user!

Selected model: KP265

Selected port: COM1

Selected speed: 115200

Please press and hold power button!

Stop by user!

Selected model: KP265

Selected port: COM4

Selected speed: 115200

Please press and hold power button!

Phone detected!

Loader startup Ok..

Reading phone info...

Flash ID: 000000

Flash type: 000000

Flash size: 0Mb

Start write firmware...

Start write part #1...

Error write block: 0x 01010000

Phone disconnected

For operation finishing do next:

- press "Disconnect" and power phone ON without SIM

- press 2945#*# for entering eng. mode

- select "Factory Reset"

Elapsed: 30 secs. --> (v.2.1.8)

Selected model: KP265

Selected port: COM4

Selected speed: 115200

Please press and hold power button!

Phone detected!

Loader startup Ok..

Reading phone info...

Flash ID: 000000

Flash type: 000000

Flash size: 0Mb

Phone disconnected

Selected model: KP265

Selected port: COM4

Selected speed: 115200

Please press and hold power button!

Phone detected!

Loader startup Ok..

Reading phone info...

Flash ID: 000000

Flash type: 000000

Flash size: 0Mb

Cancel by user.

Elapsed: 2 secs. --> (v.2.1.8)

Read eeprom...

Error read block 0x4F80000

Phone disconnected

Elapsed: 24 secs. --> (v.2.1.8)

Selected model: KP265

Selected port: COM4

Selected speed: 115200

Please press and hold power button!

Bad answer!

Selected model: KP265

Selected port: COM4

Selected speed: 921600

Please press and hold power button!

Phone detected!

Loader startup Ok..

Reading phone info...

Flash ID: 000000

Flash type: 000000

Flash size: 0Mb

Error change baud rate!

Start write firmware...

Start write part #1...

Error write block: 0x 01010000

Phone disconnected

For operation finishing do next:

- press "Disconnect" and power phone ON without SIM

- press 2945#*# for entering eng. mode

- select "Factory Reset"

Elapsed: 25 secs. --> (v.2.1.8)

Selected model: KP265

Selected port: COM4

Selected speed: 921600

Please press and hold power button!

Phone detected!

Loader startup Ok..

Reading phone info...

Flash ID: 000000

Flash type: 000000

Flash size: 0Mb

Error change baud rate!

Start read data...

Error read block 0x1000000

Phone disconnected

Link para o comentário
Compartilhar em outros sites

  • 2 semanas depois...
  • 1 ano depois...
  • 1 mês depois...

Mesmo problema, alguma solução? Problema é o seguinte: 1. baixei flash direto do suporte da Z3x, pois as que tem aqui só serve para Vygis, não serve para z3x, pois a mesma solicita o formato .bin 2. conectei com vários cabos diferentes, selecionei o arquivo baixado e trava nos 60% ao apertar e segurar o botão POwer, ainda quando está reconhecendo o aparelho. 3. demora, demora e da erro. Box utilizada: z3x

Link para o comentário
Compartilhar em outros sites

Participe da conversa

Você pode postar agora e se cadastrar mais tarde. Se você tem uma conta, faça o login para postar com sua conta.
Nota: Sua postagem exigirá aprovação do moderador antes de ficar visível.

Visitante
Responder

×   Você colou conteúdo com formatação.   Remover formatação

  Apenas 75 emojis são permitidos.

×   Seu link foi automaticamente incorporado.   Mostrar como link

×   Seu conteúdo anterior foi restaurado.   Limpar o editor

×   Não é possível colar imagens diretamente. Carregar ou inserir imagens do URL.

×
×
  • Criar Novo...