RIFF JTAG - Samsung B2710 (Samsung Xcover 271) Unbrick / Repair supported

[GSM international news]

<div><font color="#000000"><font face="Times New Roman"><font color="#efefef"><font face="trebuchet ms">03.05.2011 Samsung B2710 (Samsung Xcover 271) Unbrick / Repair supported

Samsung B2710 resurrection is simple. Phone is auto powered on when USB Cable and battery are connected.

To resurrect Samsung B2710 do this:

• Solder JTAG cable to the Samsung B2710 JTAG pads;
• Connect USB cable to phone and PC;
• Make sure Samsung B2710 is selected in the list of models
• Click Resurrect button;
• Wait few seconds until software signals a successful operation completion;
• Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

To enter download mode:

<ul>Disconnect PC cable;

Insert battery;

Hold both

Clan GSM, the Best of Brazil Forum

http://forum.clangsm.com.br

GSM Hosting, the largest forum of the World

http://forum.gsmhosting.com

Union of the best and strongest.