Ir para conteúdo

S7 Edeger G935F Connection error Z3X


Posts Recomendados

boa tarde galera estou com um samsung s7 edger  que estava em loop ai fui flashear ele pelo odin agora ele não entra em recovery  só consigo coloca=lo em modo download 

tentei flashear ele pelo odin de novo mas ele não da processo 

fica só em "initialy..."

ai a pouco tempo adquiri box´s UFI,MEDUSA PRO, Z3X ATV SAM.

tentei escrever a flash pela z3x e deu isso


  FLASH INSTRUÇÕES:
  1. Choose correct flash file(s).
  2. If you have PIT file chosen, then you must check 'Repartition' option.
  3. Check flashing options if needed (Repartition, EFS clear, Boot update).
  4. Power on the phone in download mode (turn off phone, press vol.down + home + power).
  5. Connect the phone to PC with USB cable, install drivers if needed.
  6. Press 'Flash' button. 

Operation: Flash
Selected model: SM-G935F
Software version: 37.0

Analisando arquivo... OK
Total file size: 0x04C589A0 (76 Mb)
Searching USB Flash interface... COM3 detected
Configurando conexão... error

Done with Samsung Tool PRO v.37.0

 

tentei via UFI ela nem reconhece o aparelho mesmo ele estando em modo download...

obs: o aparelho nõ entra em modo recovery mas entra em modo download  o pc reconhece ele  a box z3x tbm a UFI DONGLE não reconhece "ja instalei tudo quanto é driver possivel"

e a MEDUSA PRO estou sem o adaptador pra fazer a leitura via EMMC  ou JTAG.

desde ja agradeo a todos pela ajuda 

 

Link para o comentário
Compartilhar em outros sites

Em 10/08/2019 em 15:19, mamoto disse:

boa tarde galera estou com um samsung s7 edger  que estava em loop ai fui flashear ele pelo odin agora ele não entra em recovery  só consigo coloca=lo em modo download 

tentei flashear ele pelo odin de novo mas ele não da processo 

fica só em "initialy..."

ai a pouco tempo adquiri box´s UFI,MEDUSA PRO, Z3X ATV SAM.

tentei escrever a flash pela z3x e deu isso


  FLASH INSTRUÇÕES:
  1. Choose correct flash file(s).
  2. If you have PIT file chosen, then you must check 'Repartition' option.
  3. Check flashing options if needed (Repartition, EFS clear, Boot update).
  4. Power on the phone in download mode (turn off phone, press vol.down + home + power).
  5. Connect the phone to PC with USB cable, install drivers if needed.
  6. Press 'Flash' button. 

Operation: Flash
Selected model: SM-G935F
Software version: 37.0

Analisando arquivo... OK
Total file size: 0x04C589A0 (76 Mb)
Searching USB Flash interface... COM3 detected
Configurando conexão... error

Done with Samsung Tool PRO v.37.0

 

tentei via UFI ela nem reconhece o aparelho mesmo ele estando em modo download...

obs: o aparelho nõ entra em modo recovery mas entra em modo download  o pc reconhece ele  a box z3x tbm a UFI DONGLE não reconhece "ja instalei tudo quanto é driver possivel"

e a MEDUSA PRO estou sem o adaptador pra fazer a leitura via EMMC  ou JTAG.

desde ja agradeo a todos pela ajuda 

 

qual rom do s7 edge ta usando ? 

mostre uma foto nitida do aparelho em modo download

Link para o comentário
Compartilhar em outros sites

34 minutos atrás, mamoto disse:

passei e  deu o mesmo prolema 

ta dando isso ai na octoplus

Bemvindo na  Octoplus Box Samsung software versão 2.8.1.2
-----------------------------------------------------------------------------------
To connect SM-G935F phone you have to perform the following steps:
1. Disconnect USB cable from phone. 
2. Go to Menu->Settings->More->About Device.
3. Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
Plataforma: Samsung Android
Porto seleccionado: COM12
Modelo seleccionado: SM-G935F
Operation: Rooting
Connecting to server...
Connecting to server...Ok!
Checking resource files...
Downloading resources...
All necessary resource files have been downloaded successfully.
Please put the phone into Download Mode and connect USB cable.
To put SM-G935F into Download Mode, You have to perform the 
following steps:
1. Press and hold "Volume-" + "Home" + "Power ON" keys.
2. When phone turns on, press "Volume+" key.
Waiting for phone...
Firmware write started.
Writing Firmware Failed
Rooting phone failed.
Performed by 2.8.1.2 Software version.
-----------------------------------------------------------------------------------
Plataforma: Samsung Android
Porto seleccionado: COM12
Modelo seleccionado: SM-G935F
Operation: Read info
Reading info, please wait...
Proper android device not found. Make sure that "USB debug" option on 
the device is turned on.
Performed by 2.8.1.2 Software version.
Selected BOOT file: C:\Users\dudacell\Downloads\G935FXXU3ERHC_
4FILES_8.0.0_ZTO_Binary_3\BL_G935FXXU3ERHC_CL13895453
_QB19568582_REV00_user_low_ship.tar.md5
Selected AP file: C:\Users\dudacell\Downloads\G935FXXU3ERHC_
4FILES_8.0.0_ZTO_Binary_3\AP_G935FXXU3ERHC_CL13895453
_QB19568582_REV00_user_low_ship_meta.tar.md5
Selected CP file: C:\Users\dudacell\Downloads\G935FXXU3ERHC_
4FILES_8.0.0_ZTO_Binary_3\CP_G935FXXU3ERHC_CL878338
_QB10643114_SIGNED.tar.md5
Selected CSC file: C:\Users\dudacell\Downloads\G935FXXU3ERHC_
4FILES_8.0.0_ZTO_Binary_3\CSC_ZTO_G935FZTO3ERH4
_CL14214975_QB19648648_REV00_user_low_ship.tar.md5
Please put the phone into Download Mode and connect USB cable.
To put SM-G935F into Download Mode, You have to perform the 
following steps:
1. Press and hold "Volume-" + "Home" + "Power ON" keys.
2. When phone turns on, press "Volume+" key.
Found phone on 
Advanced mode!
Firmware write started.
Please select firmware with PIT
Writing Firmware Failed
Performed by 2.8.1.2 Software version.
Selected PIT file: C:\UFI\Android-ToolBox\Samsung\SM-G935F
\G935FXXU1APB6_6.0.1_FullFlash
\HERO2LTE_EUR_OPEN_HIDDEN150M.pit
Selected BOOT file: C:\Users\dudacell\Downloads\G935FXXU3ERHC_
4FILES_8.0.0_ZTO_Binary_3\BL_G935FXXU3ERHC_CL13895453
_QB19568582_REV00_user_low_ship.tar.md5
Selected AP file: C:\Users\dudacell\Downloads\G935FXXU3ERHC_
4FILES_8.0.0_ZTO_Binary_3\AP_G935FXXU3ERHC_CL13895453
_QB19568582_REV00_user_low_ship_meta.tar.md5
Selected CP file: C:\Users\dudacell\Downloads\G935FXXU3ERHC_
4FILES_8.0.0_ZTO_Binary_3\CP_G935FXXU3ERHC_CL878338
_QB10643114_SIGNED.tar.md5
Selected CSC file: C:\Users\dudacell\Downloads\G935FXXU3ERHC_
4FILES_8.0.0_ZTO_Binary_3\CSC_ZTO_G935FZTO3ERH4
_CL14214975_QB19648648_REV00_user_low_ship.tar.md5
Please put the phone into Download Mode and connect USB cable.
To put SM-G935F into Download Mode, You have to perform the 
following steps:
1. Press and hold "Volume-" + "Home" + "Power ON" keys.
2. When phone turns on, press "Volume+" key.
Found phone on 
Advanced mode!
Firmware write started.
Writing Firmware Failed
Performed by 2.8.1.2 Software version.
-----------------------------------------------------------------------------------
To connect SCL24 phone you have to perform the following steps:
1. Disconnect USB cable from phone. 
2. Go to Menu->Settings->More->About Device.
3. Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Restart phone.
11. Press "Read Info" in software.
-----------------------------------------------------------------------------------
To connect SM-G935T phone you have to perform the following steps:
1. Disconnect USB cable from phone. 
2. Go to Menu->Settings->More->About Device.
3. Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
Selected BOOT file: C:\Users\dudacell\Downloads
\ClanSOFT_G935FXXU3ERHC_4FILES_8.0.0_ZTO
\BL_G935FXXU3ERHC_CL13895453_QB19568582_REV00
_user_low_ship.tar.md5
Selected AP file: C:\Users\dudacell\Downloads
\ClanSOFT_G935FXXU3ERHC_4FILES_8.0.0_ZTO
\AP_G935FXXU3ERHC_CL13895453_QB19568582_REV00
_user_low_ship_meta.tar.md5
Selected CP file: C:\Users\dudacell\Downloads
\ClanSOFT_G935FXXU3ERHC_4FILES_8.0.0_ZTO
\CP_G935FXXU3ERHC_CL878338_QB10643114_SIGNED.tar.md5
Selected CSC file: C:\Users\dudacell\Downloads
\ClanSOFT_G935FXXU3ERHC_4FILES_8.0.0_ZTO
\CSC_ZTO_G935FZTO3ERH4_CL14214975_QB19648648_REV00
_user_low_ship.tar.md5
Please put the phone into Download Mode and connect USB cable.
To put SM-G935T into Download Mode, You have to perform the 
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on 
Advanced mode!
Firmware write started.
Writing Firmware Failed
Performed by 2.8.1.2 Software version.
-----------------------------------------------------------------------------------
To connect SM-G935F phone you have to perform the following steps:
1. Disconnect USB cable from phone. 
2. Go to Menu->Settings->More->About Device.
3. Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
Selected AP file: D:\combinations\COMBINATION_FA60
_G935FXXU3ARI2\COMBINATION_FA60_G935FXXU3ARI2_CL7964511
_QB19635521_REV00_user_mid_noship.tar.md5
Please put the phone into Download Mode and connect USB cable.
To put SM-G935F into Download Mode, You have to perform the 
following steps:
1. Press and hold "Volume-" + "Home" + "Power ON" keys.
2. When phone turns on, press "Volume+" key.
Found phone on 
Advanced mode!
Firmware write started.
Writing Firmware Failed
Performed by 2.8.1.2 Software version.
Selected AP file: D:\combinations\COMBINATION_FA60
_G935FXXU3ARI2\COMBINATION_FA60_G935FXXU3ARI2_CL7964511
_QB19635521_REV00_user_mid_noship.tar.md5
Please put the phone into Download Mode and connect USB cable.
To put SM-G935F into Download Mode, You have to perform the 
following steps:
1. Press and hold "Volume-" + "Home" + "Power ON" keys.
2. When phone turns on, press "Volume+" key.
Writing firmware Canceled
Performed by 2.8.1.2 Software version.
-----------------------------------------------------------------------------------
Plataforma: Samsung Android
Porto seleccionado: COM12
Modelo seleccionado: SM-G935F
Operation: DRK Fix
Note: Type *#0*# on the phone and connect UART cable.
Searching for device. Please wait...
Device not found!
DRK fixing failed!
Performed by 2.8.1.2 Software version.
-----------------------------------------------------------------------------------
Plataforma: Samsung Android
Porto seleccionado: COM12
Modelo seleccionado: SM-G935F
Operation: DRK Fix
Note: Type *#0*# on the phone and connect UART cable.
Searching for device. Please wait...
Device not found!
DRK fixing failed!
Performed by 2.8.1.2 Software version.
-----------------------------------------------------------------------------------
Plataforma: Samsung Android
Porto seleccionado: COM12
Modelo seleccionado: SM-G935F
Operation: Reboot Recovery
Proper android device not found. Make sure that "USB debug" option on 
the device is turned on.
Rebooting phone failed.
Performed by 2.8.1.2 Software version.
-----------------------------------------------------------------------------------
Plataforma: Samsung Android
Porto seleccionado: COM12
Modelo seleccionado: SM-G935F
Operation: DRK Fix
Proper android device not found. Make sure that "USB debug" option on 
the device is turned on.
DRK fixing failed!
Performed by 2.8.1.2 Software version.
-----------------------------------------------------------------------------------
Plataforma: Samsung Android
Porto seleccionado: COM3
Modelo seleccionado: SM-G935F
Operation: DRK Fix
Proper android device not found. Make sure that "USB debug" option on 
the device is turned on.
DRK fixing failed!
Performed by 2.8.1.2 Software version.
-----------------------------------------------------------------------------------
Plataforma: Samsung Android
Porto seleccionado: COM3
Modelo seleccionado: SM-G935F
Operation: Reboot Recovery
Proper android device not found. Make sure that "USB debug" option on 
the device is turned on.
Rebooting phone failed.
Performed by 2.8.1.2 Software version.
Selected PIT file: C:\UFI\Android-ToolBox\Samsung\SM-G935F
\G935FXXU1APB6_6.0.1_FullFlash
\HERO2LTE_EUR_OPEN_HIDDEN150M.pit
Selected BOOT file: C:\Users\dudacell\Downloads
\ClanSOFT_G935FXXU3ERHC_4FILES_8.0.0_ZTO
\BL_G935FXXU3ERHC_CL13895453_QB19568582_REV00
_user_low_ship.tar.md5
Selected AP file: C:\Users\dudacell\Downloads
\ClanSOFT_G935FXXU3ERHC_4FILES_8.0.0_ZTO
\AP_G935FXXU3ERHC_CL13895453_QB19568582_REV00
_user_low_ship_meta.tar.md5
Selected CP file: C:\Users\dudacell\Downloads
\ClanSOFT_G935FXXU3ERHC_4FILES_8.0.0_ZTO
\CP_G935FXXU3ERHC_CL878338_QB10643114_SIGNED.tar.md5
Selected CSC file: C:\Users\dudacell\Downloads
\ClanSOFT_G935FXXU3ERHC_4FILES_8.0.0_ZTO
\CSC_ZTO_G935FZTO3ERH4_CL14214975_QB19648648_REV00
_user_low_ship.tar.md5
Please put the phone into Download Mode and connect USB cable.
To put SM-G935F into Download Mode, You have to perform the 
following steps:
1. Press and hold "Volume-" + "Home" + "Power ON" keys.
2. When phone turns on, press "Volume+" key.
Found phone on 
Advanced mode!
Firmware write started.
Escrevendo a secção PIT...
Writing Firmware Failed
Performed by 2.8.1.2 Software version.
Selected BOOT file: C:\Users\dudacell\Downloads
\ClanSOFT_G935FXXU3ERHC_4FILES_8.0.0_ZTO
\BL_G935FXXU3ERHC_CL13895453_QB19568582_REV00
_user_low_ship.tar.md5
Selected AP file: C:\Users\dudacell\Downloads
\ClanSOFT_G935FXXU3ERHC_4FILES_8.0.0_ZTO
\AP_G935FXXU3ERHC_CL13895453_QB19568582_REV00
_user_low_ship_meta.tar.md5
Selected CP file: C:\Users\dudacell\Downloads
\ClanSOFT_G935FXXU3ERHC_4FILES_8.0.0_ZTO
\CP_G935FXXU3ERHC_CL878338_QB10643114_SIGNED.tar.md5
Selected CSC file: C:\Users\dudacell\Downloads
\ClanSOFT_G935FXXU3ERHC_4FILES_8.0.0_ZTO
\CSC_ZTO_G935FZTO3ERH4_CL14214975_QB19648648_REV00
_user_low_ship.tar.md5
Please put the phone into Download Mode and connect USB cable.
To put SM-G935F into Download Mode, You have to perform the 
following steps:
1. Press and hold "Volume-" + "Home" + "Power ON" keys.
2. When phone turns on, press "Volume+" key.
Found phone on 
Advanced mode!
Firmware write started.
Please select firmware with PIT
Writing Firmware Failed
Performed by 2.8.1.2 Software version.
 

Link para o comentário
Compartilhar em outros sites

57 minutos atrás, lkievel disse:

Você tentou apenas pela Z3x ou também pelo Odin?  Para esse procedimento eu recomendo o Odin 3.12 segue: link

<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> 
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
 

deu isso ai agora 

Link para o comentário
Compartilhar em outros sites

Participe da conversa

Você pode postar agora e se cadastrar mais tarde. Se você tem uma conta, faça o login para postar com sua conta.
Nota: Sua postagem exigirá aprovação do moderador antes de ficar visível.

Visitante
Responder

×   Você colou conteúdo com formatação.   Remover formatação

  Apenas 75 emojis são permitidos.

×   Seu link foi automaticamente incorporado.   Mostrar como link

×   Seu conteúdo anterior foi restaurado.   Limpar o editor

×   Não é possível colar imagens diretamente. Carregar ou inserir imagens do URL.

×
×
  • Criar Novo...