Ir para conteúdo

Procedimentos realizados com Sucesso com UMT !!!


Posts Recomendados

  • 3 semanas depois...

moto g4 play frp feito segurança nova.

 

Port    : Fastboot Inteface
Baud Rate    : Not Applicable
Device    : Motorola
Operation    : New FRP Reset
Searching for Device in FastBoot Mode... OK
Reading Phone Information...
Model    : XT1626
Boot Ver.    : moto-msm8952-B1.06
Baseband    : <not found>
Software    : Blur_Version.25.211.8.athene.retail.en.US
IMEI    : 354127079192095
CPU    : MSM8952
RAM    : 2GB SAMSUNG LP3 DIE=8Gb M5=01 M6=05 M7=00 M8=1F
EMMC    : 16GB SAMSUNG QE13MB RV=08 PV=07 FV=0000000000000007
Setting Factory Mode... OK
Searching Network Interface... Found
Connecting to device... OK
Model    : Moto G (4)
Bootloader    : 0xB106
Baseband    : <Read failed>
Build    : Blur_Version.25.211.8.athene.retail.en.US
Android    : 7.0
Searching Network Interface... Found
Connecting to device... OK
Model    : Moto G (4)
Bootloader    : 0xB106
Baseband    : <Read failed>
Build    : Blur_Version.25.211.8.athene.retail.en.US
Android    : 7.0
Resetting FRP... OK
Searching for Device in FastBoot Mode... OK
Removing Factory Mode... OK
Operation Finished.
Elapsed Time: 02:19
[Module Ver. 4.3]
Log Saved to Logs\171103_092223.log

Link para o comentário
Compartilhar em outros sites

  • 2 semanas depois...
Em 22/06/2017 em 17:32, Bruno Santana disse:

D295 e D295F Dead boot repair (no modo qsdload) 100%



Operation    : Flash
Checking for existing devices... Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM21)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone... OK
Waiting for response... OK
Init Handshake Sequence... OK
Hardware ID    : E1408100 [8610] 00000000
Initializing Protocol... OK
Using Auto Selection
Preparing Firehose Loader... Done
Sending Loader [8610.ufl]... Done
Executing Loader... OK
Hardware    : 8x26, eMMC, 2 GB
Warning! High Speed Driver not installed.
Please install driver from QcFire\Drivers folder.
Payload Info    : In: 65536 [4096], Out: 49152, Sector Size: 512
Writing [PrimaryGPT_0.bin] -> [PrimaryGPT]  ... Done
Writing [modem_8192.bin] -> [modem]  ... Done
Writing [sbl1_139264.bin] -> [sbl1]  ... Done
Writing [rpm_141312.bin] -> [rpm]  ... Done
Writing [tz_142336.bin] -> [tz]  ... Done
Writing [sdi_143360.bin] -> [sdi]  ... Done
Writing [aboot_144384.bin] -> [aboot]  ... Done
Writing [rpmb_148480.bin] -> [rpmb]  ... Done
Writing [tzb_149504.bin] -> [tzb]  ... Done
Writing [abootb_150528.bin] -> [abootb]  ... Done
Writing [persist_204800.bin] -> [persist]  ... Done
Writing [laf_270336.bin] -> [laf]  ... Done
Writing [boot_319488.bin] -> [boot]  ... Done
Writing [recovery_364544.bin] -> [recovery]  ... Done
Writing [factory_475136.bin] -> [factory]  ... Done
Writing [sbl1b_581632.bin] -> [sbl1b]  ... Done
Writing [cust_655360.bin] -> [cust]  ... Done
Writing [BackupGPT_7633920.bin] -> [BackupGPT]  ... Done
Applying Patches... Done
Resetting device... Done
Operation Finished.
 

 

D295f10d_00.rar

D295.rar

 

o meu da um erro 

PRIMARY GPT_0.BIN...PRIMARYGPT FAILED

IMG_20171113_165729954_HDR[1].jpg

Link para o comentário
Compartilhar em outros sites

  • 2 semanas depois...

Reparo de Boot Asus ZE550KL 100% via qcfire 

 

Operation    : Flash
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM97)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID    : E1507000 [8916] 22221111
OPK_DATA    : A0E26FBE53F3C4D13F921216258EA95B127E2CBE2713A007CDDABC4A9E37FC63
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Firehose Loader...Done
Sending Loader [8916_006.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware*    : 8916, eMMC, 16 GB
Warning! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 16384, Sector Size: 512
Writing [sbl1.mbn] -> [sbl1] ...Done
Writing [ddr.mbn] -> [DDR] ...Done
Writing [rpm.mbn] -> [rpm] ...Done
Writing [tz.mbn] -> [tz] ...Done
Writing [emmc_appsboot.mbn] -> [aboot] ...Done
Writing [hyp.mbn] -> [hyp] ...Done
Writing [gpt_main0.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup0.bin] -> [BackupGPT] ...Done
Applying Patches..............Done
Resetting device...Failed
Remove cable, reconnect battery / hold Power Button ~15 seconds.
Operation Finished.
 

Link para o comentário
Compartilhar em outros sites

  • 2 semanas depois...

reset frp lenovo vibe k5 a6020l36 
nesse metodo nao perde wifi 

Operation    : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM21)
Driver Info    : Lenovo Inc., leusbser.sys, 2.0.9.6
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID    : E1B09000 [8936] 01000100
OPK_DATA    : 5F5DBD11259E7F99680B3D60E74EC73BDD5387694EA6D96CBF808A68A7369E82
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Firehose Loader...Done
Sending Loader [8936_004.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware*    : 8936, eMMC, 16 GB
Warning! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 16384, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device    : LENOVO Lenovo A6020l36 [msm8916]
Software    : A6020l36_S032_160401_LAS, A6020l36_S032_160401_LAS [2016å¹´ 04月 01æ—¥ 星期五 17:25:14 CST]
Android Ver.    : 5.1.1
Resetting FRP Lock......Done
Operation Finished.
Module Ver. 1.4

k5.jpg

Link para o comentário
Compartilhar em outros sites

  • 2 semanas depois...

Remoção de conta Google Asus ZenFone 4 Selfie Pro Z01MD

 

Operation    : Reset FRP
Checking for existing devices...Found
Port    : COM97
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID    : E1600400 [8953] 53893A14
OPK_DATA    : 488BC976FD1296EB66F33F733D31DE27D8D2FDD04D372181223CA9837E888597
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Firehose Loader...Done
Sending Loader [8953_006.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware*    : 8953, eMMC, 32 GB
Warning! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device    : asus ASUS_Z01MD [msm8953]
Software    : NMF26F.WW_user_12.40.273.84_20171107, WW_Z01M-WW_user_12.40.273.84_20171107-user-20171107 [Tue Nov  7 02:33:38 CST 2017]
Android Ver.    : 7.1.1
Resetting FRP Lock......Done
Operation Finished.

Link para o comentário
Compartilhar em outros sites

lenovo k6 plus frp !

 

Device    : Lenovo K53
Operation    : Reset FRP
Checking for existing devices...Found
Port    : COM32
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID    : E1F00400 [8937] 00000000
OPK_DATA    : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [3]
Device may possibly not boot with this loader.
Preparing Firehose Loader...Done
Sending Loader [8937.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware*    : 8937, eMMC, 32 GB
Warning! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device    : LENOVO Lenovo K53 [msm8937]
Software    : K53_S116_161115_ROW, K53_S116_161115_ROW [Tue Nov 15 09:18:48 CST 2016]
Android Ver.    : 6.0.1
Resetting FRP Lock......Done
Operation Finished.
Module Ver. 1.5

Link para o comentário
Compartilhar em outros sites

Remoção de frp G531BT na octopus deu erro. 

 

Device: Samsung Device
Operation: Reset FRP (New Method)
Port: COM7 : SAMSUNG Mobile USB Modem #2
Checking for Device... Found [Download Mode]
Reading Data from Phone... Done
Chipset: SPRD8735 [HiSpeed]
Resetting FRP Lock Data... . Done
Closing Session... Done
---------------- IMPORTANT ----------------
Wait for phone to reboot and turn on fully or TURN ON manually.
Once Phone is completely ON, wait a few minutes and then.
goto Menu > Settings > Backup and Reset and do Factory data Reset.
Elapsed Time: 00:15
[Ultimate Samsung Flasher v1.3]

Link para o comentário
Compartilhar em outros sites

ZUK Z2131 reset total

 

Operation    : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM4)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...Ignored
Init Handshake Sequence...OK
Hardware ID    : E1709400 [8996] 00000000
OPK_DATA    : 9A3BE293E298555C1AA96321648FB1CD5F66EE326534457DD67958BDB00D5656
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Firehose Loader...Done
Sending Loader [8996_003.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : MSM8996, eMMC, 64 GB
Warning! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 131072, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device    : ZUK Z2131 [msm8996]
Software    : MMB29M dev-keys, 2.0.093_160811 [2016年 08月 11日 星期四 14:02:26 CST]
Android Ver.    : 6.0.1
Preparing Data...Done
Formatting Userdata...Done
Finalizing...Done
Operation Finished.

Link para o comentário
Compartilhar em outros sites

Participe da conversa

Você pode postar agora e se cadastrar mais tarde. Se você tem uma conta, faça o login para postar com sua conta.
Nota: Sua postagem exigirá aprovação do moderador antes de ficar visível.

Visitante
Responder

×   Você colou conteúdo com formatação.   Remover formatação

  Apenas 75 emojis são permitidos.

×   Seu link foi automaticamente incorporado.   Mostrar como link

×   Seu conteúdo anterior foi restaurado.   Limpar o editor

×   Não é possível colar imagens diretamente. Carregar ou inserir imagens do URL.


Chimera team images


×
×
  • Criar Novo...