Ir para conteúdo

Procedimentos realizados com Sucesso com UMT !!!


Posts Recomendados

nivaldo martins da silva, leia as regras do fórum:

http://www.clangsm.com.br/topic/394-regrastermos-de-uso-do-fórum/

É proibido a divulgação de dados para contato. Também temos áreas específicas para cada tipo de postagem, aqui é só para postagem de procedimentos. Não deve utilizar caps lock.

O senhor já foi alertad sobre isso outras vezes:

http://www.clangsm.com.br/topic/109084-reparo-de-boot-d295f-d325-d385-e-outros-lg-via-usb/?do=findComment&comment=382251

 

Editado por Cristiano de Moraes
Link para o comentário
Compartilhar em outros sites

Em 22/06/2017 em 17:32, Bruno Santana disse:

D295 e D295F Dead boot repair (no modo qsdload) 100%



Operation    : Flash
Checking for existing devices... Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM21)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone... OK
Waiting for response... OK
Init Handshake Sequence... OK
Hardware ID    : E1408100 [8610] 00000000
Initializing Protocol... OK
Using Auto Selection
Preparing Firehose Loader... Done
Sending Loader [8610.ufl]... Done
Executing Loader... OK
Hardware    : 8x26, eMMC, 2 GB
Warning! High Speed Driver not installed.
Please install driver from QcFire\Drivers folder.
Payload Info    : In: 65536 [4096], Out: 49152, Sector Size: 512
Writing [PrimaryGPT_0.bin] -> [PrimaryGPT]  ... Done
Writing [modem_8192.bin] -> [modem]  ... Done
Writing [sbl1_139264.bin] -> [sbl1]  ... Done
Writing [rpm_141312.bin] -> [rpm]  ... Done
Writing [tz_142336.bin] -> [tz]  ... Done
Writing [sdi_143360.bin] -> [sdi]  ... Done
Writing [aboot_144384.bin] -> [aboot]  ... Done
Writing [rpmb_148480.bin] -> [rpmb]  ... Done
Writing [tzb_149504.bin] -> [tzb]  ... Done
Writing [abootb_150528.bin] -> [abootb]  ... Done
Writing [persist_204800.bin] -> [persist]  ... Done
Writing [laf_270336.bin] -> [laf]  ... Done
Writing [boot_319488.bin] -> [boot]  ... Done
Writing [recovery_364544.bin] -> [recovery]  ... Done
Writing [factory_475136.bin] -> [factory]  ... Done
Writing [sbl1b_581632.bin] -> [sbl1b]  ... Done
Writing [cust_655360.bin] -> [cust]  ... Done
Writing [BackupGPT_7633920.bin] -> [BackupGPT]  ... Done
Applying Patches... Done
Resetting device... Done
Operation Finished.
 

 

D295f10d_00.rar

D295.rar

 

fiz o procedimento, porem da erro de loader, oque pode esta ocorrendo?

Link para o comentário
Compartilhar em outros sites

Reset FRP Moto G Play XT1603 primeiro você entra no modo fastboot seleciona a opção factory mode conecta o cabo usb, espera instalar os drivers. Depois ativa o botão Enable ADB como esta na figura e no celular permita a conexão se pedir e na sequência pressiona reset frp sem desligar o celular. O software da box recomenda desligar, mas comigo só deu certo assim.

Reset FRP.png

Link para o comentário
Compartilhar em outros sites

graças ao suporte  U.M.T via skype resolveu o problema de resetar conta mi e após entrar na internet a conta voltava.

 

 software beta teste em breve para todos ...

 Operation : Reset Mi Account
Checking for existing devices...Found
Port : COM4
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1F00500 [8996] 00000000
OPK_DATA : 65D680382C4E0091ED2A1DDCD7EFD99ED328BEBDAD748E5CE177EC5AB6544AE5
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Firehose Loader...Done
Sending Loader [8996_004.ufl]...Done
Executing Loader...OK
Hardware : MSM8996, UFS, 32 GB
Payload Info : In: 262144 [4096], Out: 131072, Sector Size: 4096
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi MI 5s [msm8996]
Software : MXB48T, V8.0.3.0.MAGMIDI [Thu Dec 22 16:09:55 CST 2016]
Android Ver. : 6.0.1
Resetting Mi Account...Done
Preparing Data...Done
Formatting Userdata...Done
When phone is completely ON, connect to Internet and add Mi Account.
Operation Finished.
Module Ver. 1.1.1

Link para o comentário
Compartilhar em outros sites

frp lenovo k6


Operation    : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM9)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID    : E1F00400 [8937] 00000000
OPK_DATA    : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [3]
Device may possibly not boot with this loader.
Preparing Firehose Loader...Done
Sending Loader [8937.ufl]...Done
Executing Loader...OK
Hardware*    : 8937, eMMC, 32 GB
Warning! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device    : LENOVO Lenovo K53 [msm8937]
Software    : K53_S123_170216_ROW, K53_S123_170216_ROW [2017å¹´ 02月 16æ—¥ 星期四 09:39:16 CST]
Android Ver.    : 6.0.1
Resetting FRP Lock.........Done
Operation Finished.

k 6 frp .JPG

Editado por Bruno Santana
Link para o comentário
Compartilhar em outros sites

  • 3 semanas depois...
Em 22/06/2017 em 17:32, Bruno Santana disse:

D295 e D295F Dead boot repair (no modo qsdload) 100%



Operation    : Flash
Checking for existing devices... Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM21)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone... OK
Waiting for response... OK
Init Handshake Sequence... OK
Hardware ID    : E1408100 [8610] 00000000
Initializing Protocol... OK
Using Auto Selection
Preparing Firehose Loader... Done
Sending Loader [8610.ufl]... Done
Executing Loader... OK
Hardware    : 8x26, eMMC, 2 GB
Warning! High Speed Driver not installed.
Please install driver from QcFire\Drivers folder.
Payload Info    : In: 65536 [4096], Out: 49152, Sector Size: 512
Writing [PrimaryGPT_0.bin] -> [PrimaryGPT]  ... Done
Writing [modem_8192.bin] -> [modem]  ... Done
Writing [sbl1_139264.bin] -> [sbl1]  ... Done
Writing [rpm_141312.bin] -> [rpm]  ... Done
Writing [tz_142336.bin] -> [tz]  ... Done
Writing [sdi_143360.bin] -> [sdi]  ... Done
Writing [aboot_144384.bin] -> [aboot]  ... Done
Writing [rpmb_148480.bin] -> [rpmb]  ... Done
Writing [tzb_149504.bin] -> [tzb]  ... Done
Writing [abootb_150528.bin] -> [abootb]  ... Done
Writing [persist_204800.bin] -> [persist]  ... Done
Writing [laf_270336.bin] -> [laf]  ... Done
Writing [boot_319488.bin] -> [boot]  ... Done
Writing [recovery_364544.bin] -> [recovery]  ... Done
Writing [factory_475136.bin] -> [factory]  ... Done
Writing [sbl1b_581632.bin] -> [sbl1b]  ... Done
Writing [cust_655360.bin] -> [cust]  ... Done
Writing [BackupGPT_7633920.bin] -> [BackupGPT]  ... Done
Applying Patches... Done
Resetting device... Done
Operation Finished.
 

 

D295f10d_00.rar

D295.rar

 


PRocedimento > Operation    : Flash
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM62)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID    : E1408100 [8x26] 00000000
OPK_DATA    : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Firehose Loader...Done
Sending Loader [8x26_002.ufl]...Done
Executing Loader...OK
Hardware*    : 8x26, eMMC, 4 GB
Warning! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 49152, Sector Size: 512
Writing [PrimaryGPT_0.bin] -> [PrimaryGPT] ...Done
Writing [modem_8192.bin] -> [modem] ...Done
Writing [sbl1_139264.bin] -> [sbl1] ...Done
Writing [rpm_141312.bin] -> [rpm] ...Done
Writing [tz_142336.bin] -> [tz] ...Done
Writing [sdi_143360.bin] -> [sdi] ...Done
Writing [aboot_144384.bin] -> [aboot] ...Done
Writing [rpmb_148480.bin] -> [rpmb] ...Done
Writing [tzb_149504.bin] -> [tzb] ...Done
Writing [abootb_150528.bin] -> [abootb] ...Done
Writing [persist_204800.bin] -> [persist] ...Done
Writing [laf_270336.bin] -> [laf] ...Done
Writing [boot_319488.bin] -> [boot] ...Done
Writing [recovery_364544.bin] -> [recovery] ...Done
Writing [factory_475136.bin] -> [factory] ...Done
Writing [sbl1b_581632.bin] -> [sbl1b] ...Done
Writing [cust_655360.bin] -> [cust] ...Done
Writing [BackupGPT_7633920.bin] -> [BackupGPT] ...Done
Applying Patches...Done
Resetting device...Done
Operation Finished.
Module Ver. 1.1

Porem o cel não liga do mesmo jeito, 

Link para o comentário
Compartilhar em outros sites

Em 22/06/2017 em 17:32, Bruno Santana disse:

D295 e D295F Dead boot repair (no modo qsdload) 100%



Operation    : Flash
Checking for existing devices... Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM21)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone... OK
Waiting for response... OK
Init Handshake Sequence... OK
Hardware ID    : E1408100 [8610] 00000000
Initializing Protocol... OK
Using Auto Selection
Preparing Firehose Loader... Done
Sending Loader [8610.ufl]... Done
Executing Loader... OK
Hardware    : 8x26, eMMC, 2 GB
Warning! High Speed Driver not installed.
Please install driver from QcFire\Drivers folder.
Payload Info    : In: 65536 [4096], Out: 49152, Sector Size: 512
Writing [PrimaryGPT_0.bin] -> [PrimaryGPT]  ... Done
Writing [modem_8192.bin] -> [modem]  ... Done
Writing [sbl1_139264.bin] -> [sbl1]  ... Done
Writing [rpm_141312.bin] -> [rpm]  ... Done
Writing [tz_142336.bin] -> [tz]  ... Done
Writing [sdi_143360.bin] -> [sdi]  ... Done
Writing [aboot_144384.bin] -> [aboot]  ... Done
Writing [rpmb_148480.bin] -> [rpmb]  ... Done
Writing [tzb_149504.bin] -> [tzb]  ... Done
Writing [abootb_150528.bin] -> [abootb]  ... Done
Writing [persist_204800.bin] -> [persist]  ... Done
Writing [laf_270336.bin] -> [laf]  ... Done
Writing [boot_319488.bin] -> [boot]  ... Done
Writing [recovery_364544.bin] -> [recovery]  ... Done
Writing [factory_475136.bin] -> [factory]  ... Done
Writing [sbl1b_581632.bin] -> [sbl1b]  ... Done
Writing [cust_655360.bin] -> [cust]  ... Done
Writing [BackupGPT_7633920.bin] -> [BackupGPT]  ... Done
Applying Patches... Done
Resetting device... Done
Operation Finished.
 

 

D295f10d_00.rar

D295.rar

 

Amigo, para esse procedimento é necessário um cabo EDL?

Link para o comentário
Compartilhar em outros sites

Participe da conversa

Você pode postar agora e se cadastrar mais tarde. Se você tem uma conta, faça o login para postar com sua conta.
Nota: Sua postagem exigirá aprovação do moderador antes de ficar visível.

Visitante
Responder

×   Você colou conteúdo com formatação.   Remover formatação

  Apenas 75 emojis são permitidos.

×   Seu link foi automaticamente incorporado.   Mostrar como link

×   Seu conteúdo anterior foi restaurado.   Limpar o editor

×   Não é possível colar imagens diretamente. Carregar ou inserir imagens do URL.


Chimera team images


×
×
  • Criar Novo...